products in Housewares

Grupa Azoty S.A

Tarnamid® T- 27 G

Tarnamid® T-27 G is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, Z

National Petrochemical Industrial Company (NATPET)

Teldene® H26ML

Teldene® H26ML is used as injection molding for thin-walled articles, containers, toys, vacuum flasks, household and kitchen articles, components of compounding and master batches application, and suitable for Lamination application.

Chandra Asri Petrochemical

Asrene® SI6008

Asrene® SI 6008 is a High Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® SI 6008 include containers and industrial applications.Characteristics include: Good Stiffness Impact Resistant

Molgroup Chemicals

TATREN IM 55 80

TATREN IM 55 80 is a reactor impact copolymer of good processing stability and high fluidity. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mold release in the injection molding process. TATREN IM 55 80 is characterized by excellent organoleptic properties (low taste and odor), high stiffness/impact balance and good flow.

Supreme Petrochem

Supreme Petrochem SC206

Supreme Petrochem SC206 has Good Flow Excellent Clarity & Shine sample collectors, Test Tubes, Good Strength & Excellent Processability.

Kettlitz-Chemie

Kettlitz Chemie Antitack BTO-44 VC

Antitack BTO-44 VC is a powdered antitack agent, basically containing inert minerals in combination with calcium stearate, detergents, anti-foam and anti-rust agents for the treatment of unvulcanized rubber compounds, endless strips and granules. The product itself is most suitable for batch-off machines with spraying and dipping systems. After drying, the antitack film which remains on the surface of the rubber compounds is easy to control visually.

TPSC Asia Pte Ltd.

TPSC Asia Pte Ltd. GPPS 1540

TPSC Asia Pte Ltd. GPPS 1540 is a high flow polystyrene for injection molding application. It offers low viscosity at high shear rate, that allows a good injectability, and a relatively high softening point.

Osterman & Company Inc.

Osterlene® HB6564

Osterman & Company Inc. Osterlene® HB6564 is a high quality product for critical food packaging requirements.HB6564 has excellent stiffness and good stiffness properties.Suggested applications for HB6564 would include distilled water, milk, soft drink concentrate and fruit juice, etc.Osterlene HB6564 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc.

Osterlene® PPC04-SHI

Osterman & Company Inc. Osterlene® PPC04-SHI is a high crystallinity, excellent stiffness, high impact copolymer resin designed for injection molding, extrusion and thermoforming applications.Uses for PPC04-SHI include; crates, consumer applications, industrial applications, pallets, tool and tote boxes and toys.

Petkim

Petkim PETOPLEN EH161

PETOPLEN EH161 is a medium flow, homopolymer polypropylene resin with medium molecular weight distribution. The material is developed for general purpose injection molding.

Phillips66

Copylene® CH200LN

COPYLENE® CH200LN is designed for general purpose injection molding applications with anti-stat, nucleation and controlled rheology.

Kettlitz-Chemie

Kettlitz Chemie Silanogran M

Mercapto silane for sulfur cured rubber compounds which are containing silica, clays or metal hydroxides as filler. It is suitable for all elastomers and recommended to use if an improvement of technical results, such as tear strength, modulus, compression set or abrasion is required.

Vogt-Plastic

Polypropylene (PP)

Polypropylene (PP) regranulates are recycled mainly of cups, trays and bottle tops. That is why the material is particularly well suited for injection molding. In terms of its composition and properties, our PP corresponds to a heterophase copolymer (HECO) existing in the virgin material. The mechanical properties can be varied over a wide spectrum. We would be delighted to assist you in selecting the grade most suitable for you. Our development team is available to help you and to quickly and individually respond to your requests about its mechanical properties and color.

Nilit

Nilamid® B3 GF30 TM2

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Vogt-Plastic

Polyolefin (PO)

Polyolefin (PO) material is a co-product from our separation process. The stable ratio of PE-LD and PP, the mechanical properties are defined and highly constant. Thus grades are available as a replacement for PE or PP. Our PO is also frequently used as a component of a compound recipe.

Grupa Azoty S.A

Tarnamid® T- 27 GF30 TF15

Tarnamid® T-27 GF30TF15 is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, GF30Z15

Elastron

SEBS - ELASTRON G500.A60.B.ABS

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

European Plastic Joint Stock Company

European Plastic Joint Stock Company PP Filler Masterbatch

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

Elastron

SEBS - ELASTRON G500.A60.N.ABS

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

Futuramat

BioCérès® BC-LBE03

BioCérès® BC-LBE03 are perfectly suited to transformation techniques by calendering, extrusion and thermo forming, and are particularly recommended for applications in the fields of horticulture, packaging, and more generally for single-use technical parts.

Nilit

Nilamid® A3 J28

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

SCGTPE Industrial

SCGTPE Industrial SA6N-A01

SOULEFLEX® SA6N-A01 is Adhesion Technical Grade - Bonding to ABS, PC and ABS/PC

Nilit

Nilamid® A3 TM2

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast WH

Mediaplast WH is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

Elastron

SEBS - ELASTRON G101.A30.B

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Nilit

Nilamid® B3 GF50

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Plastika Kritis S.A.

KRITILEN® BLUE 40300 (P. 2925C)

Color are everywhere in nature, present in every aspect of our life, holding the power to affect our emotions, mood and actions. They are a source of inspiration for art, fashion, design and branding, defining the world around us. In Global Colors we offer a board pallet of vivid and sparkling shades to create the optimal color for your products. Our color masterbatches like KRITILEN® BLUE 40300 (P. 2925C) delivers consistent quality and add enhanced value to our customers. Apart from the existing colors, a fast and accurate computerized color matching service and develop any new shade a customer may request and provide free of charge samples for testing.

Grupa Azoty S.A

Tarnamid® T- 27 MT 30

Tarnamid® T- 27 MT 30 is a 30% mineral filled polyamide 6 compound, heat stabilized.

Nilit

Nilamid® A3 AL40

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Southland Polymers

Southland Polymers ABS 780

Southland Polymers ABS 780 is a High flow Acrylonitrile Butadiene Styrene. It can be used in Electronics, Household appliances, Miscellaneous goods.

Osterman & Company Inc.

Osterlene® HD035-GP

Osterman & Company Inc. Osterlene® HD035-GP is designed for applications requiring excellent stiffness and stress crack resistant properties. It may be used as a sheet extrusion thermoforming resin or a general purpose blow molding resin.Suggested uses would include bottles and containers for bleach and detergents, personal care products and pharmaceutical packaging.HD035-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Pinnacle Polymers

Pinnacle™ PP 1120 Z

22 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH ANTISTAT AND NUCLEATION FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1120 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for molding of cutlery, closures, thin wall containers and other consumer products. 1120 Z contains both a nucleation and antistatic additive system.The 1120 Z product provides: Superior stiffness Good static charge dissipation High speed processing: very fast cycle time Excellent mold release Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Grupa Azoty S.A

Tarnamid® T- 27 GF25 M

Tarnamid® T-27 GF25M is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-080, GF25Z

Grupa Azoty S.A

Tarnamid® T-27 GF 15

Tarnamid® T-27 GF 15 is a 15% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Molgroup Chemicals

TATREN HM 50 46

TATREN HM 50 46 is a controlled rheology homopolymer of high fluidity and narrow molecular weight distribution. This grade contains nucleating and antistatic agent. TATREN HM 50 46 is characterized by very good mechanical properties, good dimensional stability and excellent stiffness. It has higher crystallization temperature which allows good de-molding at higher temperature and shorter molding cycles.

PAK Petrochemical Industries

Diamond HI-850

Diamond HI-850 is a High Impact Polystyrene grade with Opaque & matt finish surface. It gives excellent mechanical and heat resistance properties while providing with easy process ability and molding applications.