Other Consumer Goods Applications
6,654 products found for Other Consumer Goods Applications in Consumer Goods
BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Aegis® H155C1ZP is a high-viscosity nylon extrusion grade copolymer for cast or blown film applications. It possesses an attractive combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Chandra Asri Petrochemical
Trilene PP® HI10HO
Trilene HI10HO is a polypropylene homopolymer for containers, housewares, and general purpose injection molding applications.This grade uses Unipol® polypropylene technology with latest catalyst technology.
Aegis® H100MP resin is a lubricated, nucleated, medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film applications. It features a combination of strength, toughness, and thermoforming properties along with excellent heat, chemical and abrasion resistance.
Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Aegis® H135ZP resin is a high-viscosity nylon 6 extrusion grade homopolymer for cast or blown film applications. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
LOTTE Advanced Materials
Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
Sumitomo Bakelite Company
ELIX Polymers, S.L.
Elix™ ABS P2H-AT
Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.
Osterman & Company Inc.
Osterman & Company Inc. Osterlene® HD800-U is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and good balance of stiffness and impact resistance. Typical applications for HD800-U include cases, tote bins, crates and trays and open-head pails. HD800-U contains UV stabilizer for use in applications with exposure to sunlight.
VYNOVA™ S5730 is low molecular weight, low porosity vinyl chloride homopolymer. It is general purpose resin suitable for extrusion, calendering and injection blow molding of PVC - films for packaging or consumer goods, compact foamed sheets and profiles, foamed core pipes and fittings, and bottles.
ELIX Polymers, S.L.
Elix™ SAN 260G
High flow SAN copolymer. Typical applications: Used as base resin in color concentrates. Can be blended with High Rubber Modifiers (ELIXTM 100 series) to manufacture or modify properties profile of ABS resin and blends containing Polycarbonate. Major benefits: Improved flow ability for ABS grades. Excellent balance of mechanical properties, process ability and esthetics. Easy dispersion for pigments & colorants.
Zig Sheng Industrial
ZISAMIDE® SP4212 is the latest development from high performance Nylon, is produced by the EMS GROUP’s INVENTA-FISCHER. In order to assure the quality and stability, we keep the entire process in consecution.
LURANYL® KR 2403 G6
LURANYL® KR 2403 G6 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.
Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.
XIBOND® 160 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 160 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 315 °C and high shear stresses should be avoided.
Momentive Performance Materials
Silopren™ LSR 2030
Silopren™ LSR 2030 is a two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties, it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2030 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2030 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Cable accessories.
Monoisopropanolamine (MIPA) with a purity of 99% is an Monoisopryl Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.
ELIX Polymers, S.L.
Elix™ ABS P2MC
Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.
Polyplastics Group Duracon® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Hong Kong Petrochemical
HIPS SRG 100
Hips SRG 100 has a High gloss and high impact resistance with a good thermal resistance.
Elastocon TPE Technologies
Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.
Peter Greven Nederland C.V.
LIGASTAR CA 600
ROTEC® ABS 1001 FR V0/4
ROTEC® ABS 1001 FR V0/4 is ABS, injection molding grade, easy-flowing, flame retardant.
TRACEL® DB 140
TRACEL® DB 140 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.
Pinnacle™ PP 2135H
35 MELT FLOW MEDIUM IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2135H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for packaging, housewares and consumer products applications.The 2135H product provides: High stiffness and impact strength High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle's 2135H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).
Teijin Limited Panlite® L-1250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® L-1250Y are: Flame Rated Good Mold Release Medium Viscosity
TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(I2) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(I2) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only.