products in Sports & Recreation

Toray

Toray E731

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

CP-Polymer Technik

Wellamid® 6000 GV 30 HWCP

BARLOG plastics GmbH

Kebablend® / WR XB 111001/5

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebablend® / WR 01/1120/2110

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

Toray

Toray E721-FR

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

CP-Polymer Technik

Wellamid® 6600 GS 40 HWCP

Swada

Swada T Astral Pink 1

T Astral Pink 1 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Hexcel

HexPly® 916

HexPly® 916 is a self-extinguishing modified epoxy matrix system with very high self adhesive properties. It is an ideal system for single shot honeycomb sandwich manufacture, with good drape characteristics. HexPly® 916 exhibits excellent environmental resistance, and good service temperature capability. HexPly® 916 prepregs are only available in fabric form.

Kunststoff-Kontor-Hamburg

GERMAFORM 13 PTFE 18 SI 2-6940

GERMAFORM 13 PTFE 18 SI 2-6940 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main feature of GERMAFORM 13 PTFE 18 SI 2-6940 is: lubrication.

Molgroup Chemicals

TATREN IM 55 80

TATREN IM 55 80 is a reactor impact copolymer of good processing stability and high fluidity. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mold release in the injection molding process. TATREN IM 55 80 is characterized by excellent organoleptic properties (low taste and odor), high stiffness/impact balance and good flow.

Hexcel

HexForce™ 284

HexForce™ 284 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Toray

Amilan® CM3001G-45

Toray Amilan® CM3001G-45 is a Polyamide 66 (Nylon 66) product filled with 45% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Peter Greven

LIGALUB 80 MEG

Hexcel

HexForce™ 7627

HexForce™ 7627 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Agiplast

Agiplast Agimid 241B120

Agiplast Agimid 241B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 241B120-SD is PA 12 according to DIN 73378 HIPHL.

BARLOG plastics GmbH

Kebater® PBT B400 Black 9091

PBT unreinforced, injection molding type, approved for use in contact with food

Kraton

Kraton™ G1726 V

Kraton G1726 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from Taiwan in the physical form identified below. Kraton G1726 VS - is supplied as a dusted, dense pellet. Kraton G1726 V is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings.

Quantum Composites

Quantum Composites QC-8700

Quantum Composites QC-8700 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance. It exhibits unusual toughness, and is suggested for applications subject to impacts and rough handling.

Korea Petrochemicals

YUHWA HIDEN E308

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN E308 product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Hexcel

HexForce™ 7642

HexForce™ 7642 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexPly® M18/1

HexPly® M18/1 is a high performance, self extinguishing, tough epoxy matrix for use in primary aerospace structures. It exhibits low moisture absorption at saturation. HexPly® M18/1 is a toughened epoxy resin system supplied with unidirectional and woven carbon fibers. HexPly® M18/1 was developed as a controlled flow system to operate in environments up to 135ºC.

Titan Plastics Compounds

Titan Plastics Compounds ST915

Titacon® ST915 is a INJECTION MOLDING GRADE, PERMANENT ANTI-STATIC, NON-SLOUGHING, WEAR RESISTANCE, IMPACT MODIFIED, COLORABLE.

CP-Polymer Technik

Wellamid® 6000 GV 50 HWCP

Hexcel

HexForce™ 7587

HexForce™ 7587 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Peter Greven

LIGALUB 10 GE

Plastcom, spol. s r.o.

SLOVAMID 66 GF 50 TS

PA 66 reinforced with glass fiber, heat stabilized

Peter Greven

LIGASTAR ZN 101 S

Momentive Performance Materials

LIM™ 6030

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Kettlitz-Chemie

Kettlitz Chemie TAC/GR 70

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Peter Greven

LIGASTAR CA 600-V

A&C Catalysts

Resicure® 2MI

Resicure® 2MI is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 3-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 1.5 phr. Jet milled grade of Resicure imidazole is available as Resicure 2MI-J.

SHD Composites

SHD Composites MTFA500

MTFA500 (DF044) toughened epoxy adhesive film is design to cure between 80°C and 120°C, allowing flexibility in component manufacture.

Hexcel

HexForce™ 282

HexForce™ 282 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Momentive Performance Materials

LIM™ 6071

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

Hexcel

HexPly® 954-2A

HexPly® 954-2A is a 350ºF (177ºC) curing toughened cyanate resin with low moisture absorption, and excellent microcracking resistance. HexPly® 954-2A is formulated for autoclave or press molding. Recommended cure is two hours at 350ºF (177ºC). The recommended lay-up procedure is HSP-L3. The recommended cure procedure is HSP-C1 or HSP-C3. Typical applications for HexPly® 954-2A include primary and secondary aircraft structure, space structures, cryogenic tanks, or any application where impact resistance, light weight and excellent dielectric properties are required. HexPly® 945-2A can be impregnated via hot melt or solution techniques on all available fibers and fabrics.

SHD Composites

SHD Composites CEL100-1

CEL100-1 is a cyanate ester prepreg designed to cure at low temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.