products in Sports & Recreation

SCG Chemicals

SCG Chemicals WD2040P

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Hexcel

HexPly® 3501-6

3501-6 is an amine cured epoxy resin system supplied with unidirectional or woven carbon or glass fibers. Typical reinforcement is continuous AS4 carbon filaments. 3501-6 was developed to operate in a temperature environment of up to 350°F (177°C). AS4/3501-6 is recommended for general purpose structural applications.

Phillips66

Copylene® CH005

COPYLENE® CH005 is a fractional melt flow polypropylene homopolymer resin available in pellet form. It is made with a non-phthalate catalyst.

Composites Evolution Ltd

Evopreg® EPC200

Evopreg® EPC200 component prepregs are primarily designed for low-temperature, out-of- autoclave processing. Their flexible cure profile also makes them ideally suited to rapid processing at higher temperatures. Based on a toughened epoxy resin system, Evopreg® EPC200 is formulated specifically for high performance, ease of lay-up and excellent surface finish. The prepregs can be supplied with a range of reinforcement fibers and fabric constructions. They can be consolidated by vacuum bag/oven, autoclave or press molding and are designed for a range of applications including automotive, motorsport, sporting goods and general industrial..

SHD Composites

SHD Composites VTC401

VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture. It can be supplied on a variety of fabrics in UD format to meet your cost and manufacturing requirements.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

Kettlitz-Chemie

Kettlitz Chemie Silanogran SI-69/GR 70

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

Zoltek

ZOLTEK™ PX35 PREPREG TAPES

ZOLTEK produces uni-directional (UD) prepreg tapes based on ZOLTEK carbon fiber. ZOLTEK prepreg is ideal for large-volume composite applications where high production throughput, excellent composite properties, and low material cost are important. A wide selection of epoxy resin formulations meet most processing and composite property requirements for tack, toughness, surface finish, cure time, cure temperature, and delivered composite strength and modulus. Custom formulations are also available. ZOLTEK prepreg properties, such as fiber areal weight (FAW), resin content, and width, are readily adjusted to exactly meet customer requirements. Packaging options include core size, customer specified knitting requirements, and custom labeling. ZOLTEK prepreg production is geared to large volumes and low cost. Special projects are welcomed.

Toray

Amilan® CM3001-N

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Reichhold

UROTUF® F77-M-60

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

SHD Composites

SHD Composites VTC410

VTC410 is an epoxy resin system designed to combine high Tg with the potential for rapid curing. It cures from 65°C to 140°C, allowing flexibility in component manufacture. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Natrochem

Plasticizer SC DLC-A

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

National Petrochemical Industrial Company (NATPET)

Teldene® H03ML

Teldene® H03ML is used as injection molding for house wares, toys, small appliance parts, Raffia and automotive compounding.

Hexcel

HexPly® M65

HexPly® M65 is a bismaleimide resin that cures via an addition reaction in a toughened two-phase thermoset matrix with no condensation by-products. HexPly® M65 is a controlled bimaleimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing. HexPly® M65 has improved tack levels and performs well for fiber placement applications.

Kraton

Kraton™ D1102 E

Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1102 ET - supplied as a dusted porous pellet Kraton D1102 EU - supplied as an undusted porous pellet Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

AdvanSix

Aegis® H85QP

Aegis® H85QP is a lubricated, medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film. It combines strength, toughness and strong thermoforming properties with excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® H8202NLB

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® H95ZI

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Sasol

ADSPERSE 868

AdSperse 868 is a highly crystalline and linear Fischer-Tropsch hydrocarbon designed to promote the formation of optimum cell size and uniform cell structure during the EPS production, while acting as a nucleating agent.

Ecomass Technologies

Ecomass® Compound 1050CO93

Ecomass® compound 1050CO93 is a copper powder-filled polyamide alloy that is recommended to be used in applications requiring weighting and balancing. This injection molding grade is known for its high specific gravity, good toughness, and rigidity. Additionally, it is a nontoxic lead substitute thermoplastic.Density: 5.7 g/cc

Georgia-Pacific Chemicals

GP CL-7004

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Georgia-Pacific Chemicals

GP CL-7003

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Innegra

Innegra H fibers

Innegra™ H fibers are hybrid fibers containing Innegra H fibers and high modulus fibers including, but not limited to basalt, carbon, and glass. These fibers are intermingled at the filament level with a variety of combinations.

Chandra Asri Petrochemical

Asrene® UI2420

Asrene® UI 2420 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UI 2420 include caps/lids/closures, additive/masterbatch, coating applications, consumer goods and household applications.Characteristics include: Good Processability Good Toughness High Flow

Dioshy

Dioshy TPU T990M

Dioshy TPU T990M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Graft Polymer

GRAFTABOND™ MB-EGMA 00615

GRAFTABOND™ MB-EGMA 00615 is a high performance glycidyl methacrylate masterbatch based on ethylene copolymer. The high GMA content allows this material to perform as a chain extender and compatibilizer for polyesters and polyester compounds.

BARLOG plastics GmbH

Kebaflex® P D35.1

Polyester elastomer, Shore D35

Sika

Biresin® CR201

Biresin® CR201 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites with outstanding heat resistance.

Hexcel

HexPly® M34

HexPly® M34 is an epoxy system, specifically developed for low temperature curing of large structural components, particularly in industrial markets. HexPly® M34 is a self-extinguishing system, providing excellent fire-resistant properties, and meeting the German and French rail qualifications DIN 5510, S3-SR2-ST2 and NF F 16-101 (M2, F1). HexPly® M34 prepreg is ideal for manufacturing sandwich structures, providing excellent adhesion to PVC foam cores. HexPly® M34 exhibits a good shelf life at Room Temperature for a low temperature curing system.

Tosoh Corporation

Nipolon® Hard 5600

Nipolon® Hard 5600 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion, or injection molding.Important attributes of Nipolon® Hard 5600 are: Good Processability High Hardness High Strength Typical applications include: Containers Bags/Liners Bottles Consumer Goods Household Applications

Sika

Biresin® CR144

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Ela Kimyevi Maddeler

ELAFLEKS® DOTP (Dioctyl Terephthalate)

Elafleks® DOTP (Dioctyl Terephthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC floor cloth production, production of goods not containing phthalate (toy sector, bookbinding fabric production, production of some hoses, table cloth, etc.), PVC door mat production, tarpaulin production.

DOMO Chemicals

Domolen® PPHHVG30UV1 901 BK

Toray

Toray MicroPly™ ES72A-2

Toray Toray MicroPly™ ES72A-2 is a 125°C (257°F) curing low-density, expanding, unsupported, epoxy syntactic core. ES72A-2 offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. ES72A-2 can be easily contoured and shaped. Toray MicroPly™ ES72A-2 expands using a closed cell process ensuring complete homogeneous cell structure, the density/strength may be altered simply by changing cure pressure or limiting the volume available for expansion, the material is capable of expanding up to 650%. Toray MicroPly™ ES72A-2, formerly Amspand, is available in a variety of thicknesses down to 1 mm, and is supplied in sheets (625 mm x 400 mm).