products in Sports & Recreation

VYNOVA

VynoKlear

VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.

AdvanSix

Aegis® H155C1ZP

Aegis® H155C1ZP is a high-viscosity nylon extrusion grade copolymer for cast or blown film applications. It possesses an attractive combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® H100ZP

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Voelpker Spezialprodukte GmbH

WARADUR® E

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

Peter Greven

LIGALUB 55 PE

AdvanSix

Aegis® H135ZP

Aegis® H135ZP resin is a high-viscosity nylon 6 extrusion grade homopolymer for cast or blown film applications. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Tosoh Corporation

Nipoflex® 720

Nipoflex® 720 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 720 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Versalis - A subsidiary of Eni S.p.A

Clearflex® CL B0

Clearflex® CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main ApplicationClearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.

AdvanSix

Aegis® H100NP

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Kraton

Kraton™ MD1653 M

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Chi Mei Corporation

Kibiton® PB-5903

ELIX Polymers, S.L.

Elix™ ABS P2H-AT

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

Sika

Sika RSF 816 G

Sika RSF 816 G can be combined with natural fibers and fabrics such as flax, hemp or cellulose based materials fo greener composite solutions.

Tosoh Corporation

Nipoflex® 710

Nipoflex® 710 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 710 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

The Polyolefin Company (TPC)

Cosmothene® EVA H2181

GMS Composites

GMS Composites EP – 530

GMS Composites EP – 530 is a flame retardant epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-530 is available in a range of substrates such as carbon, glass or aramid. The product is self-extinguishing and meets the UL 94 V-0 classification. The flow and tack of EP-530 can also be varied.

Tosoh Corporation

Nipoflex® 722

Nipoflex® 722 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 722 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Braskem America

Braskem America HDI2061

Braskem HDI2061 is a high density polyethylene (HDPE) for injection molding segment. By having good fluidity HDI20612 provides easy processability and high productivity combined with high rigidity and hardness. The narrow molecular weight distribution gives low tendency to deformation.

Kraton

Kraton™ MD1648 M

Kraton MD1648 M is a linear triblock based on styrene and ethylene/butylene. It has a nominal 220 MFR (230C @ 2160g) and is in the enhanced rubber segment (ERS) family of polymers. It is supplied from North America in the physical form shown below. Kraton MD1648 MO - supplied as an organic dusted pellet. Kraton MD1648 M is used for melt blown elastics, compounding, and adhesive formulating. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Toray

Amilan® CM3001G-30

Toray Amilan® CM3001G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes automotive. Primary characteristic includes flame rated.

CP-Polymer Technik

Wellamid® 6600-PA66-GV 20 HWV0CP

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Tosoh Corporation

Nipoflex® 633

Nipoflex® 633 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 633 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

The Polyolefin Company (TPC)

Cosmoplene® AW161

Zig Sheng Industrial

ZISAMIDE® SP4212

ZISAMIDE® SP4212 is the latest development from high performance Nylon, is produced by the EMS GROUP’s INVENTA-FISCHER. In order to assure the quality and stability, we keep the entire process in consecution.

Kotec

Kotex K-30UVR Polycarbonate

Kotex K-30UVR is a UV stability, Mould release, Medium viscosity

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97

Antitack NP-97 is a Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tank, it passes through the region of highest concentration and gets the optimum coverage of an-titack agent.

National Petrochemical Industrial Company (NATPET)

Teldene® B20ML

Teldene® B20ML is used as injection molding for toys, furniture, sport goods, leisure goods, Housewares, TWIM food containers, medium to Large pails, photovoltaic panel and automotive compounding application.

Petkim

Petkim PETILEN I22-19T

PETILEN I22-19T is a high flow low density polyethylene resin, produced by high pressure tubular process. Itis developed for injection molding and compounding applications. PETILEN I22-19T contains no additives.

Peter Greven

LIGASTAR CA 600

Matrix Polymers

Revolve M-711

Revolve M-711 is a rotational molding polyethylene general purpose grade designed to provide antistatic properties and still maintain a wide processing window, excellent mouldability and good impact strength. The grade is suitable for food contact applications. This grade is fully UV stabilized.

Hexcel

HexPly® M79-M79-LT

HexPly® M79/M79-LT is a hotmelt, thermosetting, low-exothermic epoxy resin matrix, specifically designed for prepreg applications at which short cure cycles below 100°C are required. M79/M79-LT can be used for manufacture of large industrial components, suitable for cure of thin and thick sections. M79/M79-LT exhibits a long out-life of 8 weeks at ambient conditions. M79 is supplied as moderate tack and M79-LT as low tack resin matrix.

Petkim

Petkim PETILEN I10-19T

PETILEN I10-19T is a high flow low density polyethylene resin, produced by high pressure tubular process. Itis developed for injection molding and compounding applications. PETILEN I10-19T contains no additives.

Peter Greven

LIGASTAR CA 800

Idemitsu PS

Idemitsu PS HT50

Idemitsu PS HT50 is high impact polystyrene that is easy for mold ability, size stability and recyclability. High impact polystyrene feature high impact strength and with different characteristics that suit for various type of application. These grades have a good balance of flow rates and flexural modulus features.

Momentive Performance Materials

LIM™ 6050-D2

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Hexcel

HexForce™ AGP193-P

HexForce™ AGP193-P has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.