products in Automotive Electronics

PENTAC Polymer GmbH

Pentamid™ B S GV10 GK20 H black

Pentamid B S GV10 GK20 H black is a low viscosity, heat stabilized polyamide 6, 10% glass fiber and 20% glass bead reinforced.

Polyplastics Group

Armlen™ PP MF 40-1

BARLOG plastics GmbH

Kebaform® C 130.2

POM copolymer unreinforced, medium viscosity

BARLOG plastics GmbH

Kebablend® / WR FE 190202

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebaflex® / U FE 181105/2 Natural

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

PENTAC Polymer GmbH

Pentamid™ A GV15 E H black

Pentamid A GV15 E H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, impact modified.

BARLOG plastics GmbH

Kebaform® C 909 WR

POM copolymer unreinforced, medium viscosity, UV stabilized

PENTAC Polymer GmbH

Pentamid™ B GV15 E H black

Pentamid B GV15 E H black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced, impact modified.

PENTAC Polymer GmbH

Pentamid™ B GV20 H UV natural

Pentamid B GV20 H UV natural is a normal viscosity, heat stabilized polyamide 6, 20% glass fiber reinforced, uv stabilized.

CP-Polymer Technik

Wellamid® 22LN2-N

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

BARLOG plastics GmbH

Kebablend® / WR XB 081101

BARLOG plastics GmbH Kebablend® / WR XB 081101 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebablend® / WR 02/2110

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

Lati Industria Thermoplastici S.p.A

Latilub™ 73/13-01M

Self-lubricating product based on Polyoximethylene (POM). Molybdenum dysulphide.

BARLOG plastics GmbH

Kebaform® C 901 CB

POM copolymer unreinforced, medium viscosity, electrically conductive

PENTAC Polymer GmbH

Pentamid™ A GV30 H1 RC black

Pentamid A GV30 H1 RC black is a normal viscosity, high heat stabilized polyamide 66, 30% glass fiber reinforced, recompound.

PENTAC Polymer GmbH

Pentamid™ A GV30 H LS natural

Pentamid A GV30 H LS natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

BARLOG plastics GmbH

Kebaform® / C 901 TS

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Polyplastics Group

Duranex® 457EV

Polyplastics Group Duranex® 457EV is a Polycarbonate + PBT (PC+PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant Impact Resistant

IGM Resins

Omnipol ASA

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

BARLOG plastics GmbH

Kebablend® / WR 01/1220

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

BARLOG plastics GmbH

Kebaform® / C 270.0 LS Black (X)

POM copolymer unreinforced, low viscosity, laser-inscribable

BARLOG plastics GmbH

Kebablend® / WR XB 111001/12

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Lati Industria Thermoplastici S.p.A

Latan™ 13 S/30

Polyoximethylene (POM) based compound. Glass beads. Medium viscosity. High dimensional stability.

Pennwhite LTD

Greasil 4000

Greasil 4000 is a UK Water Regulations Advisory Scheme (WRAS) approved water repellent non-melting silicone grease lubricant.

Lati Industria Thermoplastici S.p.A

Latilub™ 66-20T G/40

Latilub™ 66-20T G/40 is a self-lubricating product based on Polyamide 66 (PA66) reinforced with glass fibers.

CP-Polymer Technik

Wellamid® 6600 GS 40 HWCP

BARLOG plastics GmbH

Kebablend® / WR 01/2120

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Samyang Corporation

TRIBIT® 1500G30

TRIBIT® 1500G30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

PENTAC Polymer GmbH

Pentamid™ B GV30 H LS natural

Pentamid B GV30 H LS natural is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced, laser markable.

PENTAC Polymer GmbH

Pentamid™ A GV25 H UV natural

Pentamid A GV25 H UV natural is a normal viscosity, high heat stabilized polyamide 66, 25% glass fiber reinforced.

BARLOG plastics GmbH

Kebablend® / WR 01/1120/2110

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

CP-Polymer Technik

Wellamid® 6000 GV 30 HWCP

Momentive Performance Materials

Silopren™ LSR 2750

Silopren™ LSR 2750 TP 3824 is a two-component liquid silicone rubber for injection molding, which offers primer-less adhesion to a wide range of substrates including metals and engineering plastics, but without adhesion to the mold. Full bond strength is reached after a short post cure (e.g. 1 h at 100°C) or by longer storage at room temperature. This makes Silopren™ LSR 2750 TP 3824 the optimal choice for cost-efficient manufacturing of high numbers of articles in integrated processes such as multi-component injection molding or insert-molding.Key Features and Benefits Primer-less adhesion to many substrates No special mold treatment needed: Final adhesion builds up with time High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good dielectric and mechanical properties Easy pigmentable due to translucent color Potential ApplicationsSilopren™ LSR 2750 TP 3824 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an overmoulding or co-molding process such as sealing elements, automotive connectors, membranes, vibration dampening elements, etc. Parts made from Silopren™ LSR 2750 TP 3824 can generally be used in technical applications without post-cure, but do not comply with regulations applicable for parts, which are intended for the pharmaceutical or food industry.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/5

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Momentive Performance Materials

Silopren™ LSR 2665

Nytef Plastics

MECHETEC ACETAL

MECHATEC ACETAL is a Polyoxymethylene Copolymer ( POM-C ) which has excellent machining stability, high strength and stiffness, superior wear resistance, large size capability.