Products in Electrical & Electronics: Acrylics, Acrylates & Methacry...

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ F 410 is an acrylic gloss control agent that provides a matte finish for injection molded plastics and elastomers. It can also be used as a blocking inhibitor for film and sheet extrusion.FeaturesGood dispersibilityPrevents blocking of sheet and film *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Esschem incorporates sustainable plant-based plasticizers into methyl methacrylate MMA bead polymers. These innovative additives are designed to enhance the flexibility and workability of methacrylate-based polymers. By incorporating bio-plasticizers into MMA bead copolymers, the resulting materials exhibit increased flexibility and reduced glass transition temperature, melting points, and tensile strengths.The inclusion of higher molecular weight components contributes to stronger and more heat-resistant materials.Furthermore, the particle size plays a crucial role in surface properties, where smaller particles enhance adhesion while larger particles contribute to robustness and rigidity.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Esschem MMA - AMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with allyl methacrylate (AMA). These copolymers showcase the unique characteristics of AMA as a crosslinker in polymers. With varying MMA and AMA concentrations, Esschem offers a wide range of copolymer beads with different properties. Higher MMA content in the copolymer results in elevated glass transition temperatures, melting points, and tensile strengths, making them ideal for applications requiring high strength and rigidity. On the other hand, increasing the AMA content lowers these properties while enhancing crosslinking and hardness. By adjusting the molecular weight, Esschem can further customize the copolymer's rigidity and crosslinking behavior. The particle size of the beads can also be modified to optimize processing and surface properties, including adhesion characteristics.

Esschem MMA - BMA Bead Copolymers are a range of copolymers combining methyl methacrylate (MMA) with butyl methacrylate (BMA).These copolymers offer a versatile solution with varying properties based on the MMA and BMA content. Higher MMA content results in copolymers with elevated glass transition temperatures, melting points, and tensile strengths, making them suitable for applications that require strength and rigidity. Conversely, increased BMA content lowers these properties while enhancing processability and potential flexibility.By adjusting the molecular weight, Esschem can tailor the copolymer structure to achieve specific rigidity requirements. Additionally, controlling the particle size allows for improvements in mechanical strength, with smaller particles offering larger surface area to volume ratios.

Esschem EMA Bead Copolymers are a range of bead polymers synthesized from ethyl methacrylate (EMA) that offers the strength of polymethyl methacrylate (PMMA) with slightly different properties.The copolymers exhibit a slightly lower glass transition temperature, resulting in a softer and more flexible final product compared to PMMA.By controlling the molecular weight, Esschem can customize the heat resistance and strength of the polymer, making it suitable for various applications across multiple industries.The smaller particle size of the beads enhances surface properties like adhesion, while larger particles contribute to a more robust and rigid material.

Esschem EMA - EGDMA Bead Copolymers are a versatile combination of ethyl methacrylate (EMA) and ethylene glycol dimethacrylate (EGDMA). With a higher proportion of EMA, these copolymers exhibit enhanced flexibility due to the less bulky ethyl group present in EMA. Conversely, increasing the EGDMA content results in a more crosslinked structure, leading to greater rigidity. The glass transition temperature remains relatively stable regardless of the percentage of each constituent. By precisely controlling the molecular weight, Esschem can optimize the level of crosslinking, resulting in superior mechanical properties such as hardness and tensile strength. Additionally, the particle size can be tailored to influence surface area and reactivity, allowing for further adjustment of the physical properties.

Esschem EMA - EHMA Bead Copolymers are a unique combination of ethyl methacrylate (EMA) and 2-ethylhexyl methacrylate (EHMA) that offers exceptional properties.The incorporation of 2-EHMA disrupts the polymer chain packing, resulting in lower glass transition temperatures and enhanced low-temperature flexibility, while significantly improving transparency.With variations in molecular weight, Esschem can further enhance the strength and flexibility of these bead copolymers. The smaller particle size of the beads improves processability and has the potential to enhance transparency, while larger particles contribute to a more rigid material.

Esschem MMA - HPMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with hydroxypropyl methacrylate (HPMA). These bead copolymers offer exceptional performance and customizable properties for various applications. With increased MMA content, these copolymers exhibit elevated glass transition temperatures, melting points, and tensile strengths, providing enhanced strength and durability. Conversely, higher HPMA content improves adhesion and reduces glass transition temperatures, melting points, and tensile strengths, offering flexibility and tailored characteristics. Esschem further enhances the molecular weight of these copolymers, resulting in more rigid and durable materials. By manipulating the particle size, solubility, dispersion properties, and transparency can be optimized, making them ideal for applications that demand transparency, strength, and toughness.

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

Esschem MMA - IBOMA Bead Copolymers are a range of copolymers that combine methyl methacrylate (MMA) with isobornyl methacrylate (IBOMA).These bead copolymers offer exceptional strength and performance for a wide range of industries. With their high glass transition temperature, melting point, and tensile strength, they provide incredibly strong polymers that meet demanding application requirements.By controlling the molecular weight, Esschem ensures that the copolymer beads exhibit enhanced strength and rigidity. Furthermore, the performance characteristics, including adhesion, can be tailored by optimizing the particle size.

Esschem MMA - Styrene Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) and styrene. These bead copolymers offer a wide array of properties and applications. With increased MMA content, the resulting materials exhibit remarkable strength and transparency. Conversely, a higher proportion of styrene enhances hydrophobicity, hardness, and impact resistance. The molecular weight plays a crucial role in determining the characteristics of the copolymers. Higher molecular weights, often associated with increased styrene content, yield stronger and more heat-resistant materials. Esschem's ability to manipulate the molecular weight distribution allows for customized properties such as durability, elasticity, and processing ease. Additionally, the particle size of the copolymers influences surface properties and rigidity.

Rovene 6502 is a high solids, acrylic emulsion designed for formulation of PSA and packaging adhesives It can be used neat or blended with a variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6502 may also have application in vinyl flooring adhesives due to its plasticizer migration resistance.

POLYTHICK 5423A is a one-component type pressure-sensitive adhesive for polypropylene film. This product exhibits moderate adhesive strength and removability. It is applicable as an adhesive sealant for polypropylene bags (used in the packaging of products such as calculators, clocks and clothes) and envelopes.

Seiko PMC US-1071 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Electrolube AFA optically clear acrylic conformal coating ideally suited for use as an LED coating or in other commercial applications to protect the PCB from the environment. AFA boasts superb properties, maintaining excellent clarity, with minimal color temperature shift after prolonged UV exposure making it a superb choice for an LED coating application. While it also provides excellent protection in humid environments, and flexibility over a wide operating temperature range.

Starex BF-0930 by LOTTE Advanced Materials is comprised of Methyl Methacrylate / ABS. It is commonly used

Microsphere® FN-180S is chlorinated free grade and is high temperature expansive product.

Seiko PMC X-1 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

SIVIC® N 530 has improved ozone and fire resistance and is recommended for hose covers, cable jackets, conveyor belts and cellular goods.

VITROFLEX TRANSPARENT MCA261NN is the acrylic pouring plate with transparent colors that allow vision through.