Products in Electrical & Electronics: Silicones

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

WACKER® AP 1000 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. This specially stabilized product exhibits excellent thermal stability. It is primarily used as a heat transfer fluid and a pressure transfer fluid. For practical purposes, the useful temperature range of WACKER® AP 1000 STAB is between -35 °C and +250 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

SEMICOSIL® 988 TIC is a non-slump, thermally curable, one-part silicone rubber with excellent insulation properties. This product is optimized for insulation coating applications in disk power semiconductors. It is a ready-to-use system that exhibits thixotropic behavior, ensuring easy application and positioning. SEMICOSIL® 988 TIC is transparent, has a medium hardness, and offers high flexibility as a low-stress adhesive.

ELASTOSIL® A07 Translucent is a free-flowing, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. During cure, it splits off an organic amine. It can be applied by dipping, spraying, brushing, or coating. Thinner coatings can be obtained by the addition of solvents (e.g. toluene, white spirit); thicker coatings can be realized by multiple-step coating.

LUMISIL® LR 7601/60 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

ELASTOSIL® RT 604 A/B is a pourable, addition-curing two-part silicone rubber that vulcanizes at room temperature. It is a highly transparent, flowable material with very low viscosity. This two-component general-purpose encapsulant features rapid heat cure, low hardness, and a crystal-clear appearance.

SEMICOSIL® 924 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. It is a ready-to-use product, requiring no additional mixing. SEMICOSIL® 924 exhibits thixotropic flow, allowing for easy application. Upon vulcanization, it forms a soft gel. This silicone rubber has low levels of volatiles and uncured polymers, contributing to its high purity. It also boasts a low ion content. SEMICOSIL® 924 maintains almost constant properties within a broad temperature range, from -50 °C to +180 °C.

POWERSIL® 552 Browngreen is a one-component silicone dispersion that, upon curing, forms a tough high voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® 552 Browngreen creates a long-term hydrophobic surface, preventing the formation of wet conductive films and minimizing the risk of pollution flashovers.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

LUMISIL® LR 7601/70 A/B is a liquid silicone rubber belonging to the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates produced from this material are characterized by their remarkable optical transparency, as well as their exceptional mechanical and electrical properties.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

ELASTOSIL® LR 3675/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

LUMISIL® LR 7601/50 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

SEMICOSIL® 987 GR is a one-part, ready-to-use, thermally curable silicone elastomer that exhibits non-slump properties. It is primarily used as a sealing adhesive. The silicone is thixotropic in nature, allowing for easy application and shaping. It offers high flexibility, making it suitable for low-stress adhesive bonding, such as in molded-in-place gasket (FIPG) applications. Additionally, SEMICOSIL® 987 GR provides primerless adhesion to a wide range of substrates.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® LR 3005/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® RT 402 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is characterized by its antistatic properties, condensation-curing mechanism, and flowability. This silicone rubber is commonly used in applications such as elastomers for pad printing, where its unique properties are beneficial.

ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3072/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3003/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups. It serves as a versatile damping fluid, providing excellent vibration and noise reduction in various applications. Additionally, it is commonly used as a heat transfer fluid and serves as a base fluid for low temperature lubricants.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

ELASTOSIL® LR 3003/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.

ELASTOSIL® RT 602 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits a medium hardness and excellent heat stability. This product is suitable as a general purpose encapsulant.

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

WACKER SilGel® 612 A/B is a low-viscosity, pourable, addition-curing RTV-2 silicone rubber. This product undergoes vulcanization at room temperature, resulting in the formation of a highly flexible and very soft silicone gel. It boasts a rapid heat curing process, allowing for efficient production times. With its remarkably low hardness, WACKER SilGel® 612 A/B provides the desired silicone gel consistency. Additionally, this silicone rubber offers a crystal-clear appearance.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.