Electrical & Electronics

DuPont

Rynite® 935 BK505

Rynite® 935 BK505 is a 35% mica/glass-reinforced modified polyethylene terephthalate resin with low warpage and excellent electrical properties.

NuSil Technology

NuSil™ CF1-3510

NuSil™ CF1-3510 is a engineering flourosilicone elastomer. Designed for protection of electrical components and assemblies against shock, vibration, moisture, dust, chEMIcals, and other environmental hazards.

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

Crastin® SK605 BK851

Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

NuSil Technology

LightSpan® LS2-6941

LightSpan® LS2-6941 is a optically clear silicone elastomer.

DuPont

Crastin® SK605 NC010

Crastin® SK605 NC010 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

DuPont

Rynite® 415HP BK503

Rynite® 415HP BK503 is a 15% glass-reinforced, toughened modified polyethylene terephthalate resin improved for easy, fast processing over a broad molding range.

NuSil Technology

NuSil™ CF2-4721

NuSil™ CF2-4721 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone ResinComment: 75 Type D, Precatalyzed.

DuPont

TPSiV® 3345-65A Black 25565 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 3345-65A Custom Color Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 3345-65A BK029 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

Rynite® 935 NC010

Rynite® 935 NC010 is a 35% mica/glass-reinforced modified polyethylene terephthalate resin with low warpage and excellent electrical properties.

3D Systems

Accura® 25

Features Fexible Snap fit assemblies Master patterns for vacuum casting Durable functional prototypes

Technyl Suppliers

Technyl® Star SX 216 V50

Technyl® Star SX 216 V50 is a PA 6 SX series. It has high stiffness, excellent surface aspect and high flow.

Chemiplastica

Urochem 162

Urochem 162 Moulding Compounds can be supplied in an almost unlimited range of colours from translucent light pastels to black. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack moulded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.

Westlake Plastics

POMALUX® Polyoxymethylene (POMC)

Pomalux® Polyoxymethylene (POMC) is a high-performance acetal copolymer used for a wide range of applications. Pomalux® has good chemical and high-temperature resistance. As a semi-crystalline material, Pomalux® has good wear resistance and low frictional characteristics.Pomalux® also has low moisture absorption making Pomalux® a good candidate for a wide range of structural and mechanical components that carry or transmit loads in dry or wet environments .

DuPont

Rynite® 415HP NC010

Rynite® 415HP NC010 is a 15% glass-reinforced, toughened modified polyethylene terephthalate resin improved for easy, fast processing over a broad molding range.

Shine Polymer Technology

Shinepoly® LP2082

Shinepoly® LP2082 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance and weatherability with minimum affect on flame retardant performance of PC.

Shine Polymer Technology

Shinepoly® LP2088

Shinepoly® LP2088 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance, thermal stability and hydrolytic resistance with minimum affect on flame retardant performance of PC.

3D Systems

Accura® Bluestone

Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

Plastics Group

Polifil® GFPPCC-10

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes.

Plastics Group

Polifil® GFPPCC-20

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Plastichemix Industries

Polyamide Nylon 6 – 30% Glass Filled

Polyamide Nylon 6 – 30% Glass Filled is product is 30% glass fiber filled, black Nylon 66 used in Automotive Parts, Electrical & Electronic Components, Bobbins, Switch Gears, Furniture & Fixtures, Housings of Hand Tools.

Plastichemix Industries

Polyamide Nylon 66 – 33% Glass Filled

Polyamide Nylon 66 – 33% Glass Filled is product is 33% glass fiber filled, black Nylon 66 used in Automotive Parts, Electrical & Electronic Components, Bobbins, Switch Gears, Furniture & Fixtures, Housings of Hand Tools.

Westlake Plastics

Norylux® modified polyphenylene oxide (PPO)

Norylux® Modified Polyphenylene Oxide (PPO) is a high strength amorphous engineering thermoplastic offering outstanding mechanical, thermal, and electrical properties along with low moisture absorption and low thermal expansion. Westlake Plastics extrudes and compression molds unfilled and flame-retardant products and compression molds glass reinforced, and glass/mineral filled products.

SABIC's Specialties Business

LEXAN™ Copolymer EXL8134

LEXAN EXL8134 is a PC/siloxane copolymer resin with high flow, excellent low temperature impact and 30% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications.

SABIC's Specialties Business

ULTEM™ Resin ATX200R

High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.

SABIC's Specialties Business

ULTEM™ Resin 1100

Standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0, V2 and 5VA listing.

SABIC's Specialties Business

ULTEM™ Resin 1010M

ULTEM 1010M Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains a reduced level of internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque colors.

SABIC's Specialties Business

ULTEM™ Resin SF2360

High flow ULTEM for thin wall application

SABIC's Specialties Business

ULTEM™ Resin UF5011S

Enhanced flow, Specialty filtered Polyetherimide (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming.

SABIC's Specialties Business

ULTEM™ Resin 2312EPR

30% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing.

SABIC's Specialties Business

ULTEM™ Resin 2212R

20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.

SABIC's Specialties Business

ULTEM™ Resin SF2250

High flow ULTEM for thin wall application

SABIC's Specialties Business

ULTEM™ Resin 9011

Transparent, high flow Polyetherimide (Tg 217C). ECO Conforming. Improved processability for Fiber extrusion.

SABIC's Specialties Business

ULTEM™ Resin LTX300A

High flow Polyetherimide blend with low toxicity, smoke and flame evolution. ECO Compliant, UL94 V0 listing in recognized colors.