Electrical & Electronics

Albemarle Corp

SAYTEX® HP-7010

SAYTEX® HP-7010 flame retardant is a polymeric additive containing thermally stable, aromatic bromine. It is available in powder (HP-7010P) or granule form (HP-7010G).SAYTEX HP-7010 flame retardant provides outstanding thermal stability and electrical performance. It is particularly suitable for engineering plastic applications such as polyesters (PET, PBT, PCT) and polyamides (nylons).

Europiren

Ecopiren 3,5

Ecopiren 3,5 is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

Albemarle Corp

SAYTEX® CP-2000

SAYTEX® CP-2000 flame retardant is a reactive intermediate, or additive, depending on the application.As a reactive flame retardant, SAYTEX CP-2000 flame retardant finds particular application in epoxy, vinyl esters and polycarbonate systems. As an additive flame retardant, SAYTEX CP-2000 flame retardant is widely used in ABS.

Albemarle Corp

SAYTEX® 8010

SAYTEX® 8010 flame retardant is a non-diphenyl oxide based product containing a high level of aromatic bromine.SAYTEX 8010 flame retardant can be used in a wide range of high performance applications. In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers.

Albemarle Corp

SAYTEX® BT-93W

SAYTEX® BT-93W flame retardant is a unique white-colored additive that combines stable, aromatic bromine with an imide structure.SAYTEX BT-93W flame retardant provides premium performance in a wide range of applications. It finds use in polyolefins, high-impact polystyrene (HIPS), thermoplastic polyesters (PBT, PET,etc.), polycarbonate and elastomers.

Albemarle Corp

SAYTEX® 8010ZD

SAYTEX® 8010ZD flame retardant is an environmentally friendly pelletized version of SAYTEX 8010 flame retardant, a non-diphenyl oxide based product containing a high level of bromine. It is highly efficient and non-blooming, has good thermal and UV stability and also provides improved impact strength, melt-flow and elongation properties.

Albemarle Corp

SAYTEX® 621

SAYTEX® 621 flame retardant is a physical blend of brominated polystyrene and a polyester resin. It is supplied in a convenient low-dust pellet form and contains a high level of bromine, about 64 percent.

Presafer

Nitrophor™ FR2000

Nitrophor™ FR2000 is a kind of new low halogen environmentally friendly flame retardant with N, P and Br for PP. NitrophorTM FR2000 has advantages of low dosage, low bromine content, no migration and no need of Sb2O3. Besides, it is also suitable for mineral filling system and masterbatch system. Products with NitrophorTM FR2000 can pass the tests of UL 94 V-2 (1.5mm), GWFI 850°C and GWIT 750°C.

Albemarle Corp

SAYTEX® RB-49

SAYTEX® RB-49 flame retardant, tetrabromophthalic anhydride, is an additive or reactive intermediate containing aromatic bromine.SAYTEX RB-49 flame retardant is designed as a reactive intermediate for use in unsaturated or saturated polyesters, polyols, esters and imides.

Unibrom

EcoFlame APP203 (Ammonium Polyphosphate)

EcoFlame APP203 (Ammonium Polyphosphate) fits for all the conditions where APP201 is applicable. Moreover, it can work as acid donor for intumescent coatings.

Europiren

Ecopiren 3,5C

Ecopiren 3,5C is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

Martin Marietta Magnesia Specialties

MagShield® UF

MagShield® UF magnesium hydroxide is achemically precipitated grade of magnesium hydroxide with a median particle size of 1.0 micron and produced from magnesium-rich brine and dolomitic lime. It is designed for critical, non-halogen flame retardant applications such as select wire and cable insulation and other thin section applications.

The R.J. Marshall Company

The R.J. Marshall Company FD409

Marshall Additive Technologies FD409 is a reactive synergist blend specially formulated to provide a good balance of flame retardant performance and reduced cost when used as a partial Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 30 and 50% of Antimony Trioxide.

Europiren

Ecopiren 3,5NA

Ecopiren 3,5NA is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

Unibrom

EcoFlame APP204 (Ammonium Polyphosphate)

EcoFlame APP204 (Ammonium Polyphosphate) fits for all the conditions where APP201 is applicable. In particular, it is especially suitable for thermoplastics and solvent radical intumescent coatings. This phosphorous based smoke suppressant exhibits excellent electrical insulation property, and it can be added into a base material in order to meet the UL 94 VO flame retardant requirements.

Go Yen Chemical Industrial Company

Go Yen Chemical Industrial Company GY-FR-P35

Go Yen Chemical Industrial Company GY-FR-P35 is a Non-Halogen Flame Retardant with a low volatility during processing.

Oceanchem Group

Oceanchem Group Zinc Stannate(ZS)

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

The R.J. Marshall Company

MAGNAPUR® MGP-N2SC

Magnapur® MGP-N2SC is a stearic acid coated, magnesium hydroxide of natural origin (brucite). This 2.0 µm coated magnesium hydroxide is suitable as a flame retardant in in a wide range of applications including wire & cable bedding and jacketing, foams, hoses, roofing, sheet, and profile.

Sundow Polymers

WELLPREN® IM500

WELLPREN® IM500 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Presafer

Nitrophor™ FR1000

Nitrophor™ FR1000 is a kind of new low halogen environmentally friendly flame retardant with N, P and Br for PP. Compared with bromine-based flame retardant, Nitrophor™ FR1000 has advantages of low dosage, low bromine content, no migration and no need of Sb2O3.

Martin Marietta Magnesia Specialties

MagShield® UF NB 10

MagShield® UF NB 10 magnesium hydroxide is achemically precipitated grade of magnesium hydroxide with a median particle size of 1.0 micron and produced from magnesium-rich brine and dolomitic lime. It is designed for critical, non-halogen flame retardant applications such as select wire and cable insulation and other thin section applications. MagShield UF NB10 has been treated with a stearate coating that is fully bonded to the magnesium hydroxide to improve dispersion, handling and physical properties of the compounded plastic.

Duslo

DUHOR® N-PL/S

Duhor® N-PL/S is a flame retardant and smoke suppressor. DUHOR® N-PL/S is surface untreated white powder of magnesium hydroxide with limited particle size distribution and specific morphological properties.

Oceanchem Group

Oceanchem Group DBNPG

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

The R.J. Marshall Company

The R.J. Marshall Company FD335

Marshall Additive Technologies FD335 is a reactive synergist blend specially formulated to provide the maximum flame retardant performance when used as an Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 50 and 100% of Antimony Trioxide.

The R.J. Marshall Company

H-TEC™ 1000

provides a cost-effective way to flame retard and smoke suppress plastics, rubber and other polymer systems. It is alumina trihydrate and has good flowability and wetout. H-TEC™ 1000 is used for flexible and rigid PVC, nitrile rubbers, neoprene, polyolefins, EPDM, SBR, EPR, latexes, urethanes, EVA copolymers, unsaturated polyesters and other polymer systems.

The R.J. Marshall Company

The R.J. Marshall Company SDAOM

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

Wacker Chemie AG

GENIOPLAST® Fluid FR

GENIOPLAST® FLUID FR is a high viscosity silicone formulation consisting of a linear silicone fluid and a silicone resin dissolved in the fluid. The resulting formulation is clear and colorless.

The Mitsubishi Chemical Group

METABLEN™ S 2501

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Dar-Tech Inc.

Portaflame® SG 10 LV

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.

Dar-Tech Inc.

Portaflame® SG 20

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Securoc® B125

Securoc® B125 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 10 LSA

Portaflame® SG 10 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 10 LSA is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It is not a dangerous substance (DSD or CLP) and does not contain substances of very high concern (SVHC), including their fire decomposition products.

Dar-Tech Inc.

Securoc® B9

Securoc® B9 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 63

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 10

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 35

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.