products in Adhesives & Sealants

Munzing

AGITAN® P 841

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Kraton

Kraton™ D1164 P

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton

Kraton™ D1126 P

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Munzing

AGITAN® P 833

AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Munzing

TAFIGEL® PUR 82

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

Munzing

AGITAN® 526

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

AGITAN® E 255

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Kraton

Kraton D1124K

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Munzing

AGITAN® P 840

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

NuSil Technology

NuSil™ MED-6010

NuSil™ MED-6010 is a optically clear low viscosity silicone elastomer.

NuSil Technology

NuSil™ R-2637

NuSil™ R-2637 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 0.006 ohm-cm.

Kraton

Kraton™ D1163 J

Kraton D1163 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1163 JSP supplied as dusted, dense pellet. Kraton D1163 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton

UNI-REZ™ 2940

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

NuSil Technology

NuSil™ R-1600

NuSil™ R-1600 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Glob TopsComments: Low / High Temperature.

Kraton

Kraton™ D1157 A

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Munzing

AGITAN® 280

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

NuSil Technology

NuSil™ CV-2680-12

NuSil™ CV-2680-12 is a controlled volatility film adhesive.

Munzing

AGITAN® 108

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Key Polymer

Tough-Seal 41 A

Tough-Seal 41 A is a flame retardant version of Tough-Seal 21. Self-extinguishing flame retardant performance has been validated by UL and KEY Tough-Seal 41A/Bhas achieved a UL94V-0 rating. KEY Tough-Seal 41A/Bachieves flame retardant properties without antimony and brominated compounds.

NuSil Technology

NuSil™ CV2-2646

NuSil™ CV2-2646 is a controlled volatility electrically conductive RTV silicone.

Kraton

UNI-REZ™ 2720

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

Kraton

UNI-REZ™ 2638

UNI-REZ 2638 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2638 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

Kraton

UNI-REZ™ 2641

UNI-REZ 2641 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2641 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Kraton

UNI-REZ™ 2223

UNI-REZ 2223 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kraton

Kraton™ D1157 E

Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 ES - supplied as porous pellets dusted with amorphous silica Kraton D1157 ETM - supplied as powder dusted with talc for the North American market Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1118 K

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1102 J

Kraton D1102 J is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature: Kraton D1102 JSZ - supplied as crumbs dusted with amorphous silica Kraton D1102 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton

Kraton™ D0243 K

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

BTC Europe GmbH

Oppanol® B 10 SFN

Instant Deal AvailableCarton: 4.70EUR/KG EXW (MOQ: 20KG)Request a Quote to access the deal now. Terms & Conditions for Instant Deals An Instant Deal is a time limited price indication for a selective product. Prices and information displayed for Instant Deals do not constitute a binding offer from BTC but are just an opportunity for the customer to request an offer. The contractual partner responsible for the order processing is the related local BASF Unit in the country of the respective sold-to party. For the DACH region it is the BTC Monheim GmbH. The price is calculated as base price without freight and logistic costs, which are added in a next step depending on quantity and place of delivery. A final price offer needs to be requested with the button "request a quote"; Incoterms are CPT; we do not deliver below the respective MOQ; we do not commit on any volumes - "only as long as stock last"; we only sell and deliver to sold-to and ship-to companies within our RTC core reaions in Furone.

BTC Europe GmbH

Oppanol® B 11 SFN

Oppanol® B 11 SFN is a versatile compound containing polyisobutylene, serving as both a water repellent and a viscosity modifier. Classified within the chemical family of polyisobutylene polymers (PIB) and polyolefins, this product is labeled as stabilizer-free, halal, and kosher.

BTC Europe GmbH

Oppanol® B 15 SFN F

Oppanol® B 15 SFN F is a solid polyisobutylene serving as a viscosity modifier and water repellent. Belonging to the polyisobutylene polymers (PIB) and polyolefins chemical family, it adheres to high standards with stabilizer-free, halal, and kosher labeling claims. The solid form ensures convenient handling and application.

BTC Europe GmbH

Oppanol® B 12 SFN

Instant Deal AvailableCarton: 4.95EUR/KG EXW (MOQ: 20KG)Request a Quote to access the deal now. Terms & Conditions for Instant Deals An Instant Deal is a time limited price indication for a selective product. Prices and information displayed for Instant Deals do not constitute a binding offer from BTC but are just an opportunity for the customer to request an offer. The contractual partner responsible for the order processing is the related local BASF Unit in the country of the respective sold-to party. For the DACH region it is the BTC Monheim GmbH. The price is calculated as base price without freight and logistic costs, which are added in a next step depending on quantity and place of delivery. A final price offer needs to be requested with the button "request a quote"; Incoterms are CPT; we do not deliver below the respective MOQ; we do not commit on any volumes - "only as long as stock last"; we only sell and deliver to sold-to and ship-to companies within our RTC core reaions in Furone.

BTC Europe GmbH

Oppanol® B 15 SFN

Oppanol® B 15 SFN is a solid formulation featuring polyisobutylene as its primary ingredient. This versatile compound serves as a water repellent and viscosity modifier. Classified within the Polyisobutylene Polymers (PIB) and Polyolefins chemical family, Oppanol® B 15 SFN stands out with labeling claims such as stabilizer-free, Halal, and Kosher. In its solid form, this ingredient ensures ease of handling and application.

BTC Europe GmbH

Oppanol® B 14 SFN

Oppanol® B 14 SFN, a solid compound enriched with polyisobutylene, serves as a water repellent and viscosity modifier. Categorized within the chemical family of polyisobutylene polymers (PIB) and polyolefins, this product is distinguished by being stabilizer-free, halal, and kosher.

BTC Europe GmbH

Oppanol® B 13 SFN

Oppanol® B 13 SFN serves as a water repellent and a viscosity modifier, belonging to the polyisobutylene polymers (PIB) and polyolefins chemical families. This product boasts labeling claims such as stabilizer-free, halal, kosher. It caters to various markets, including adhesives and sealants, building and construction, consumer goods, electrical and electronic products, food and nutrition, industrial, and printing and packaging.

BTC Europe GmbH

Oppanol® N 50 SF

Oppanol® N 50 SF is a solid polyisobutylene compound designed for oil and gas applications.