products in Electronics Coatings

Huangshan Huahui Technology

Huangshan Huahui Technology Triglycidyl Isocyanurate (Electronic Grade) HT 801

Huangshan Huahui Technology Triglycidyl Isocyanurate (Electronic Grade) HT 801 is an isocyanurate based crystaline polyepoxide compound. It has good heat resistance, weather resistance, adhesion and high temperature stability..

Bright Associates (Bright Resin)

BRITOL X-575 (75% Solid)

BRITOL X-575 (75% Solid) is Liquid Epoxy Resin. Used as Chemical Resistant Air Dry & Bake Coatings, Electro Technical Users, Reinforced Plastics, Electrical Laminates.

Nissan Chemical America Corporation

TEPIC® SS

TEPIC® SS is a unique symmetrical triazine contains tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Green Belting

Green Belting 179-20S

Green Belting 179-20S has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. This high temperature, abrasion resistant multi-ply tape is made with a silicone/glass layer laminated to a heavy gage aluminum foil. The aluminum layer enhances conformability and produces clean edge lines.

KSCNT

Reacrone PCL-40F

Reacrone PCL-40F is 100% activity acrylic type. PCS-100S is Silica Free. And it can get the best clarity.

White Engineering Surfaces Corporation

WESCOAT® ZX07P6

WESCOAT® ZX07P6 is a coating product that will guarantee performance and longer lifespans. WESCOAT® ZX07P6 addresses the thermal, wear and erosion issues.

Para-Coat Technologies

Para-Coat Technologies Parylene C

Parylene C is the most widely used parylene dimer, providing a useful combination of properties, plus a very low permeability to moisture, chemicals, and other corrosive gasses.

Cytonix, LLC

FluorAcryl 1939

FluorAcryl 1939 is a bifunctional perfluoropolyether (PFPE) urethane acrylate. FluorAcryl is a surface modifier that improves gloss. It is compatible and miscible with low molecular weight reactive UV-curable diluents and acrylic monomers. Some of the properties of FluorAcryl 1939 include good release agent, good water and oil repellency and good chemical resistance. As a surface modifier this also offers good hardness, substrate-wetting and flow-properties. Recommended dosage is between 0.5–5% w/w. During application and UV light curing, FluorAcryl blooms quickly and effectively on the surface of the coating, imparting low surface energy and non-stick E2C properties. FluorAcryl is made for UV curable coatings use.

Akron Coating and Adhesives

Akron Coating and Adhesives ACA-10-414

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

DNF

DNF DFC-300

Application to TV, computer, and other display panels for optical characteristic such as high hardness, abrasion resistance, and high transparency.

Tulco INC

Tulco INC PD-500

Tulco INC PD-500 is for low to moderate thickening, anti-foaming, free flowing, anti-caking and silicone rubber application.

Tulco INC

Tulco INC PD-100

Tulco INC PD-100 is for low to moderate thickening, anti-foaming, free flowing, anti-caking and silicone rubber application.

Yincae Advanced Materials

Yincae® UVC 88P

Yincae® UVC 88P is a conformal coating. It is a silver filled, one part epoxy conductive coating for glass and plastic surfaces. It features highly fluorescing, one part, 100% solid, dual cure acrylate polyurethane conformal coatings. They provide excellent chemical resistance, surface hardness, flexibility, and moisture resistance. After cure, these products provide excellent protection for all surfaces against dust, chemicals and harsh environmental factors. They also increase their biocompatibility and ability to retain relatively brilliant fluorescence, allowing coating inspection under UV light. The cure of shadow areas can be accomplished using a secondary heat cure.

Tulco INC

Tulco INC PD-200

Tulco INC PD-200 is for low to moderate thickening, anti-foaming, free flowing, anti-caking and silicone rubber application.

Zip-Chem

Cor-Ban® D-5029NS

Cor-Ban® D-5029NS is a long lasting, high solids water displacing CIC used for for high profile aircraft substrates.

Tulco INC

Tulco INC HM-253 Deammoniated

Tulco INC HM-253 Deammoniated is for low to moderate thickening, free flowing, anti-caking and silicone rubber application.

Advenira

Advenira® Thixorion® SDN® Nanocomposite Coating

Advenira® Thixorion® SDN® Nanocomposite Coating Al-Si nanocomposite coating is an aqueous formulation that has an excellent combination of mechanical, electrical and chemical resistant properties that makes it useful for a variety of applications.

California Hardcoating

Perma-New™ V-​​​16 (​​​​​​​​UV-cur​​ed) Class

Perma-New™ V-​​​16 (​​​​​​​​UV-cur​​ed) Class Coatings are new formulations similar to Perma-New V-2, but this class can be optimized for adhesion of vacuum deposited coatings (anti-reflective coatings) that will be applied on top. Although the V-2 class coatings can be used for subsequent vacuum deposition, it is easier for the vacuum deposition operator to achieve good adhesion over formulations in this class. The solids of this coating technology can be as high as 46%, which makes them suitable for spin application on ophthalmic lenses. At lower solids, coatings of this class can be used for dipping, roller or flow applications.

Electrolube

Electrolube AFA-G

AFA-G is a more viscous / gel like version of the successful AFA acrylic conformal coating. It has been designed to be used alongside the other AFA coatings. AFA-G is intended to be dispensed around the base of connectors to act as a permanent masking material. This masking layer will help prevent the capillary flow of material into the connectors, which can cause loss insulation of tabs and loss of connectivity. In addition, the improved resistance to flow of AFA-G can be used to more clearly define difficult keep-out areas during selective coating. . It can also be used to re-enforce sharp edges of critical components which may otherwise be missed by less viscous materials during the coating process.

Inventec Performances Chemicals

ABchimie™ 746E UV

ABchimie™ 746E UV is a single transparent component designed to protect printed circuit boards in harsh environments. It uses dual cure technology (UV/humidity) to crosslink in the shadows. ABchimie746E UV can be applied with a brush, pad printing, spray machine, and, of course, a selective coating machine, which is the best method. Because of our system's low viscosity, we can limit the thickness to around 80 microns.

NuSil Technology

NuSil™ CV-1148

NuSil™ CV-1148 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 70% Solids.

Tulco INC

Tulco INC HM-250

Tulco INC HM-250 is for low to moderate thickening, free flowing, anti-caking and silicone rubber application.

Chase Corporation

HumiSeal® Acrylic Gel

HumiSeal® Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® Acrylic Gel has been designed for use with our acrylic conformal coatings. HumiSeal® Acrylic Gel can be used for sealing, damming and to provide an extra level of protection around component leads. HumiSeal® Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® Acrylic Gel is in full compliance with the RoHS Directive 2002/95/EC.

Cytonix, LLC

FluoroSyl 3750Y

FluoroSyl 3750Y is a hydrophobic and oleophobic glass coating with great anti-fingerprint and lubricity properties. Chemically strengthened glass such as Gorilla Glass (Corning), Dragontrail (AGC) and Xensation (Schott AG) can be effectively coated with 3750Y when the glass is properly cleaned. FluoroSyl bonds to cleaned hardened-glass and produces a low surface energy, low refractive index, transparent, oil, water and stain repellent coating that is less than 10 nanometers thick.

Glyptal

Glyptal® 7815

Glyptal® 7815 GLOSS BLACK ENAMEL is a fast air-drying or low-temperature bake finish. This product is designed for use as a black, gloss finish coat on motor end windings and electrical equipment. This paint is compatible with most insulating systems. It has excellent oil, humidity and weather resistance. 7815 can be used in areas where some exterior durability is required along with fast-drying properties.

Zircon Corporation

Astrocure® 67 Oligomer

Astrocure® 67 Oligomer is a unique, low profile reactive, cycloaliphatic oligomer, especially tailored for application in ultra-violet/electron beam (UV/EB) radiation cured coating. The product is a flexible version of Astrocure® 78. It is light in color and has excellent adhesion to a wide variety of substrates.

W.C. Richards Company

W.C. Richards Company HYBRID POWDER SYSTEM

HYBRID POWDER SYSTEM is a mixture of epoxy and polyester resins, this coating combines chemical resistance, toughness, flexibility, and greater weathering capabilities. The resin combination also leads to good flow and electrostatic spray characteristics. Recommended for interior purposes.

Nissan Chemical America Corporation

TEPIC® SP

TEPIC® SP is a unique symmetrical triazine contains tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Huangshan Huahui Technology

Huangshan Huahui Technology Triglycidyl Isocyanurate (Electronic Grade) HT 802

Huangshan Huahui Technology Triglycidyl Isocyanurate (Electronic Grade) HT 802 is an isocyanurate based crystaline polyepoxide compound. It has good heat resistance, weather resistance, adhesion and high temperature stability..

TECHSPRAY

Fine-L-Kote LED2 Silicone Coating

Fine-L-Kote LED2 Silicone Coating is designed and formulated specifically for light emitting diode applications that require a completely transparent coating to provide a tough, extremely flexible protective coating. Fine-L-Kote™ LED2 offers the greatest flexibility for extreme temperatures on the flex and rigid circuitry found in LED displays, as well as an outstanding nonstick surface for soil repellency. Cured coatings are hydrolytically stable and retain their physical electrical properties even after being exposed to high temperatures and humidity without interfering with light wavelength or intensity. The Fine-L-Kote™ LED2 will not put any strain on delicate circuit components.

Green Belting

Green Belting 170-20S Green

Green Belting 170-20S Green has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. In most cases, just a single layer of 170-10S Green will withstand both the grit-blast and spray coating processes. For more demanding jobs, 170-205 Green provides an extra layer of protection.

Electrolube

Electrolube AFA-S

AFA-S is a modified version of AFA. This ‘Spray’ grade Aromatic Free Acrylic conformal coating has been formulated for use in atomised spray applicators, and manual HVLP spray guns. AFA-S comes pre-mixed to the correct viscosity for these application methods and is a ‘ready for use’ product without requiring any further mixing by the operator.

Resin Technology Group

Resin Technology Group CT-523LV Cationic UV Cure Epoxy Adhesive

Resin Technology Group CT-523LV Cationic UV Cure Epoxy Adhesive is an epoxy-based, low viscosity, cationic-curable adhesive and/or sealant. This product is activated by exposure to medium intensity UV radiationresulting in a high strength, chemical resistant, low outgassing polymer system capable of surviving exposure up to 200°C.

Tulco INC

Tulco INC PD-300

Tulco INC PD-300 is for low to moderate thickening, anti-foaming, free flowing, anti-caking and silicone rubber application.

Tulco INC

Tulco INC HM-103 Deammoniated

Tulco INC HM-103 Deammoniated is for low to moderate thickening, free flowing, anti-caking and silicone rubber application.

Inventec Performances Chemicals

3M™ Novec 2704

3M™ Novec 2704 is a single component fluorinated polymer that has been diluted in 3M™ Novec™ 7200 Engineered Fluid, a segregated hydrofluoroether solvent, to produce a low viscosity, low surface tension coating solution. It dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties, making it ideal for moisture and corrosion protection of printed circuit boards and electronic components. It does not require curing and is simple to apply. The Novec 2704 coating is nonflammable, non-ozone depleting, low in toxicity, low in GWP, RoHS compliant, and low in VOC. The coating contains a yelloworange dye that is built into the polymer and designed to fluoresce under UV light to aid in coating inspection and quality control.