products in Electronics Coatings

Orient Corporation of America

Orient (K) Black HBLW

Orient (K) Black HBLW is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 842ER – Silver Epoxy Paint

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

MG Chemicals

MG Chemicals ECC3051S – Solvent-Free Conformal Coating

Solvent Free Conformal Coating ECC3051S is a one-component, low viscosity silicone conformal coating material that cures on exposure to atmospheric moisture to form a flexible protective coating. ECC3051S conformal coating cures quickly in ambient conditions without the need for curing equipment, and can achieve faster tack-free time with exposure to mild heat. ECC3051S conformal coating can help reduce the potential for corrosion of electronic components, and under certain test conditions* has been found to surpass other polymers such as acrylics, polyurethane, polyolefin and other silicone polymers in corrosion prevention.

MG Chemicals

MG Chemicals 844AR Aerosol - ESD Safe Coating for Plastic

844AR is a one-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.

Orient Corporation of America

Orient (K) Golden Orange L

Orient (K) Golden Orange L is a water soluble azo dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419E – Premium Acrylic Conformal Coating

Premium Acrylic Conformal Coating 419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

Orient Corporation of America

Orient (K) Red GLW

Orient (K) Red GLW is a water soluble dye.It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 841AR -340G - Super Shield Nickel Conductive Spray Paint

Super ShieldTM Nickel Conductive Spray Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when corrosion resistance is a concern.

MG Chemicals

MG Chemicals ECC3011 – Solvent-Free Conformal Coating

Solvent-Free Conformal Coating ECC3011 is a one-component, low viscosity silicone conformal coating material that cures on exposure to atmospheric moisture to form a flexible elastomer protective coating. ECC3011 conformal coating cures quickly in ambient conditions without the need for curing equipment, and can achieve faster tack-free time with exposure to mild heat. ECC3011 conformal coating can help reduce the potential for corrosion of electronic components, and under certain test conditions* has been found to surpass other polymers such as acrylics, polyurethane, polyolefin and other silicone polymers in corrosion prevention.

Orient Corporation of America

Orient (K) Grey NLG

Orient (K) Gray NLG is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 842AR – Super Shield Silver Conductive Paint

MG Chemicals

MG Chemicals 419D-P-GR - Overcoat Pen - Green

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

MG Chemicals

MG Chemicals 843ER Silver Coated Copper Epoxy Paint

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

MG Chemicals

MG Chemicals 842WB - EMI Conductive Paint

EMI Conductive Paint 842WB is a 1-part, water-based conductive paint, pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 842WB is designed to reduce EMI/RFI interferences in architectural and electronic applications.

Orient Corporation of America

Orient (K) Green GM

Orient (K) Green GM is a water soluble metal complex dye.It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Yellow 4G

Orient (K) Yellow 4G is a water soluble dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Violet 3D

Orient (K) Violet 3D is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Sky Blue G

Orient (K) Sky Blue G is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419D-P-BL - Overcoat Pen - Blue

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Orient Corporation of America

Orient (K) Bordeaux RLS

Orient (K) Bordeaux RLS is a water soluble dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 841ER Nickel Epoxy Paint

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

MG Chemicals

MG Chemicals 419D – Acrylic Conformal Coating

Acrylic Conformal Coating 419D is a 1-part acrylic conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D creates a robust moisture barrier that protects printed circuit boards in humid environments. It protects effectively against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high voltage arcing, and static discharge.

Orient Corporation of America

Orient (K) Blue BRN

Orient (K) Blue BRN is a water soluble dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Gold N

Orient (K) Gold N is a water soluble ferrioxalate complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419D-P-CL - Overcoat Pen - Clear

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Orient Corporation of America

Orient (K) Blue GLW

Orient (K) Blue GLW is a water soluble anthraquinone dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 832B - Black Epoxy

Black Epoxy, Encapsulating & Potting Compound 832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. Due to its low mixed viscosity, 832B can easily penetrate small gaps and cavities. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

Orient Corporation of America

Orient (K) Red HBL

Orient (K) Red HBL is a water soluble dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 422C – Premium Silicone Modified Conformal Coating

422C is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422C is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

MG Chemicals

MG Chemicals 419D-P-WH - Overcoat Pen - White

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Orient Corporation of America

Orient (K) Black MLWN

Orient (K) Black MLWN is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Green D

Orient (K) Green D is a water soluble azo dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419C – Fast Drying Acrylic Conformal Coating

419C Acrylic Conformal Coating is an IPC-CC-830B and UL 94 V-0 certified, fast drying, xylene, and toluene free product. This one-part coating provides an excellent finish, is easy to use, and does not require special or costly equipment to apply. It is ideal for high moisture environments and applications requiring easy repair and rework. 419C coating protects electronic circuit against moisture, dirt, dust, and thermal shocks that could corrode, short circuit, or damage the electric component. It insulates against high-voltage arcing, shorts, and static discharges. As well, this coating provides a high dielectric withstand voltage that allows traces to be put closer together which helps with miniaturization.

Orient Corporation of America

Orient (K) Fiery Red SGM

Orient (K) Fiery Red SGM is a water soluble dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419D-P-BK - Overcoat Pen - Black

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

MG Chemicals

MG Chemicals 419E-340G

419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.