products in Electronics Coatings

Orient Corporation of America

Orient (K) Brown NL

Orient (K) Brown NL is a water soluble chromium complex azo dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Orient Corporation of America

Orient (K) Grey HL

Orient (K) Gray HL is a water soluble metal complex dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

MG Chemicals

MG Chemicals 419D-P-BK - Overcoat Pen - Black

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Orient Corporation of America

Orient (K) Blue 2B

Orient (K) Blue 2B is a water soluble chromium complex azo dye. It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Earth Glass

Vitrocote® 20

Vitrocote® is processed from natural amorphous aluminosilicate glass mined from a 20 million year old deposit. It is an inert white material used to improve performance and lower costs with a wide range of automotive and industrial paint and coatings. Vitrocote® generates very unique properties even at low volumes (1% by weight), acts as a flow promoter, imparts material reinforcement, and promotes dispersion in high speed shearing and mixing equipment. Vitrocote® is 100% natural and non-toxic €“ very environmentally friendly.

MG Chemicals

MG Chemicals 4353 Thinner 3

The 4353 Thinner 3 is a moderate speed drying thinner for use with the MG Chemical’s conformal coating products. The thinner promotes good flow properties and suppresses blushing.

Suncolor Corporation

SUNSPHERES™ 200 Nm

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

ACL Staticide

Staticide® 8690 Acrylic Conformal Coating

Staticide® 8690 Acrylic Conformal Coating is ideal for providing insulation against high-voltage arcing and corona shorts. This fast-drying formula creates a highly effective, firm, and durable acrylic barrier against environmental elements. The resilient, transparent coating provides exceptional acid resistance and won't fragment, chip, or crack. After curing, its self-healing properties offer protection against nicks and scratches. This ready-to-use formula performs well in both hot and cold environments and is suitable for both rigid and flexible PCBs and electronic assemblies.

allnex

EBECRYL® 109

EBECRYL® 109 is a dynamic acrylate-methacrylate monomer blend, combines 50% trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). Under free radical influence, this formulation swiftly polymerizes, making it ideal for coatings that demand superior thermal and chemical resistance. Highly recommended for applications requiring robust protection, EBECRYL® 109 excels in coatings necessitating enhanced chemical and thermal durability. It proves beneficial in solder and etch resists, ensuring optimal performance in challenging environments.

Creative Materials Inc.

Creative Materials 125-19FS/B-507

125-19FS is a flexible, re-workable, electrically conductive, silicone-based ink. The overall balance of peel strength, cohesion, printability and high temperature holding power provides a versatility that makes this product useful in a wide range of coating, printing, fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 125-19FS include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 125-19FS is one of the few conductive inks that can bond/adhere to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces and rubber surfaces. 125-19FS is optimized for screen-printing but can also be syringe dispensed, dipped and sprayed. The last two methods require dilution.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Wide Range of Applications Screen Printable Elastomeric silicone conductive ink

MG Chemicals

MG Chemicals 4351 Thinner I

The 4351 Thinner 1 is a mild diluent designed for MG Chemical’s EMI/RFI shielding products.

TBA Protective Solutions

TBA Protective Solutions ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint

ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint sprayable acrylic paint. It is a single component permanently conductive clear acrylic coating that provides effective static elimination for electronics safe handling area and explosive atmosphere applications. Fully compliant with BS EN 61340- 5.1:2007 and ATEX. It contains carbon nanotubes, a graphene derivative.

King Industries

NACURE® 155

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

Creative Materials Inc.

Creative Materials 126-28

126-28 is a carbon filled, screen-printable, electrically conductive ink suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. 126-28 can be useful in biomedical applications, biosensors, printed heaters, resistive elements and coatings, and for electronic component manufacturing. 126-28 is designed to be age and chemically resistant.Features Very flexible resistive ink

MG Chemicals

MG Chemicals 4352 Thinner II

The 4352 Thinner 2 is a moderately fast drying thinner for use with MG Chemical’s conformal products. It is compatible with film forming paint products with acrylic, alkyd, cellulose acetate butyrate, epoxy, nitrocellulose, or polyester resins. Together with these type of resin systems, the 4352 thinner promotes good flow properties and suppresses blushing.

AI Technology

AI Technology MG 150-S Masking Film Forming Gel

Suncolor Corporation

SUNSPHERES™ 15.0

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

VSI PARYLENE

Parylene Dimer Type N

Parylene Type N Dimer is the solid, granular starting material used to produce parylene conformal coating films.

AI Technology

AI Technology EDC 9150

MG Chemicals

MG Chemicals 4354 Thinner 4

The 4354 Thinner 4 is a slower drying thinner for use with the MG Chemical’s urethane and acrylic conformal products. The thinner as excellent solvent strength, making it a good oil and grease remover. It has very low water solubility, so it is unlikely to absorb water and create blush. Its drying speed is slow enough to promote excellent leveling, but it is fast enough to accommodate a reasonable assembly line speed.

TBA Protective Solutions

TBA Protective Solutions ECP 535 Static Dissipative Coloured Acrylic Coating

ECP 535 Static dissipative colored acrylic coating is a single component colored acrylic dissipative coating that provides effective anti-static control on plastic housings used in the electronic and computer industries.

TBA Protective Solutions

TBA Protective Solutions ECP 502 JSF023 EMI Shielding Nickel Acrylic Paint

ECP 502 JSF023 EMI Shielding Nickel Acrylic Paint single component Nickel/Acrylic conductive coating concentrate provides effective EMI shielding on plastic housings used in the electronics and computer industries. ECP 502/JSF023 EMI Shielding Nickel Acrylic Paint is a single component nickel acrylic conductive coating concentrate that provides effective EMI shielding on plastic housings used in the electronics and computer industries.

Cymer Chemical

SR3603-30 Polyamide-Imide Resin Solution

SR3603-30 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

AI Technology

SOLAR BLOC™ SB 9133

TBA Protective Solutions

TBA Protective Solutions ECP 592/CAN Aerosol Permanently Conductive Graphene Hybrid Transparent Acrylic Paint

ECP 592 Permanently Conductive Graphene Hybrid Clear Acrylic Coating Aerosol. It is a Single component permanently conductive graphene hybrid clear acrylic coating that provides effective static elimination for electronics safe handling area and explosive atmosphere applications. Fully compliant with BS EN 61340-5-1:2007 and ATEX. Contains carbon nanotubes and graphene derivatives.

AI Technology

AI Technology ESP 7660-HK-DAF

ESP7660-HK-DAF is a high-bond strength epoxy film adhesive laminated onto a UV release or controlled release dicing tape in designed wafer format. This new generation film incorporates wafer dicing tape and adhesive film into one DDAF (Dicing Die Attach Film). This DAF is mounted onto the back of the wafer, which is then diced into predetermined sizes. After a brief exposure to UV light (for UV releasing dicing tape), the diced chip is picked and placed directly onto a lead frame or substrate. It is designed for bonding component and substrate to substrate and carrier with matched thermal coefficients of expansion. ESP7660-HK-DAF has good thermal stability. The dry, tack-free handling of the film makes it suitable for an automated assembly.

TBA Protective Solutions

TBA Protective Solutions ECP 575/JSF182/182 Permanently Conductive Clear Two Pack Water-based Epoxy Graphene Paint

ECP 575/JSF182/182 Permanently Conductive Clear Two Pack Water-based Epoxy Graphene Paint for use in the electronics industry where ESD (electrostatic discharge) is to be avoided, ECP 575/JSF182/182 is a high quality waterborne two-pack epoxy system. Environmentally friendly it offers the advantage of low odor and easy cleaning of equipment with water. ECP 575/JSF182/182 finds applications in such areas as floor coatings, particularly where the previous coating is unknown as solvent will attack many coatings causing them to lift.

TBA Protective Solutions

TBA Protective Solutions ECP 539 Static Dissipative Treatment (Bulk)

ECP 539 Static Dissipative Treatment (Bulk) for ESD (electrostatic discharge) protection. It is a special polymeric static dissipative treatment and cleaner designed to dissipate high static potential quickly as well as prevent their build-up. The high molecular weight of ECP 539 helps to provide effective and long-lasting treatment for any surface and most materials. A light spray of ECP 539 will make most surfaces static dissipative thus providing static safe areas for a wide variety of uses.

NEI Corporation

NANOMYTE® SR-500EC

NANOMYTE® SR-500EC is a transparent coating designed to provide easy-to-clean surfaces. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC is a single component product that is easily applied by dip, spray or brush techniques. The coating can be cured at room temperature.

King Industries

K-KAT® 348

K-KAT® 348 is a versatile, efficient bismuth carboxylate catalyst that can be used as an alternative to DBTDL in 2K and 1K polyurethane systems. It provides similar properties to organotin catalysts without environmental drawbacks. It is also a non-persistent catalyst that is effective for resin synthesis.

Keeling & Walker

Keeling & Walker High Purity Indium Oxide

Despite the fact that Indium Oxide is a rare Oxide, it finds many uses in High Tech Industries. Indium Oxide is a key component of sputtering targets for thin film applications. Its property as reflector for Near Infrared Light is exploited in optical coatings and specialty mirrors. Furtheron Indium Oxide finds use in Electrical Contact Materials and Sensor Materials. Keeling&Walker manufactures a high purity (> 99.99%) grade. The Oxide consists of agglomerated nanoscale particles with an average primary particle size of 20 – 40 nm.

Creative Materials Inc.

Creative Materials 129-02(MR)

129-02(MR) is a flexible, ultraviolet-cured dielectric coating that is used as a protective, insulating layer over polymer thick film conductive inks in the manufacture of membrane switches. This coating can be used on a variety of substrates such as polycarbonate, treated and untreated polyesters, Kapton, epoxy/glass PC boards and glass. A smooth, void-free coating is obtained that has good resistance to humidity. 129-02(MR) is a moisture resistant version of 129-02.Features Clear, moisture resistant flexible UV curable dielectric for use over shielding conductive inks.

TBA Protective Solutions

TBA Protective Solutions ECP 505 EMI Shielding Silver Plated Copper Paint

ECP 505 EMI Shielding Silver Plated Copper Paint Is supplied ready for use, it is designed to give low resistance in thin film thickness, and exhibits excellent EMI shielding and grounding properties displaying excellent adhesion to most plastics and is ideal for electronic equipment housing. It exhibits excellent long term shielding and grounding properties while providing an esthetically pleasing appearance.

Creative Materials Inc.

Creative Materials 120-07LPS

120-07(LPS) is a screen-printable, electrically conductive ink, coating and adhesive suitable for application by stamping, screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, polycarbonate, glass and can also be used on low surface energy coatings such as transparent conductive oxides. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-07(LPS) include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 120-07(LPS) is a cross-linking version of 120-07(LP) and a more flexible version of 120-07T.Features Flexible/elastomeric conductive ink ideal for urethane substrates

Cymer Chemical

SR3604-35 Polyamide-Imide Resin Solution

SR3604-35 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Creative Materials Inc.

Creative Materials 125-50

125-50 is an opaque white, screen printable, one component, epoxy, solder mask. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to abrasion, scratching, and thermal aging. Applications for 125-50 include, but are not limited to, solder resistant coatings for electrical and electronic devices.Features Opaque White epoxy dielectric, adheres to ITO.