products in Packaging & Assembly: Adhesion Promoter

Mitsubishi Chemical Group Corporation

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ Epoxy YX7110

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ 1256

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Mitsubishi Chemical Group Corporation

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Bomar Specialties LLC

Bomar Oligomers® BR-744SD

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

Wacker Chemie AG

GENIOSIL® GF 82

GENIOSIL® GF 82 is an epoxy-functional alkoxysilane. It is a clear, colorless liquid with a characteristic odor similar to gasoline. It hydrolyzes slowly in the presence of water, releasing ethanol, and forms silanols that can react with themselves to produce siloxanes or bind to inorganic substrates. The epoxy group on GENIOSIL® GF 82 can undergo a ring-opening reaction with nucleophiles such as alcohols and amines.

Gelest Inc.

Gelest SIA0200.0

Gelest (3-ACRYLOXYPROPYL)TRIMETHOXYSILANE, 96% (SIA0200.0) is a comonomer for free-radical polymerization. This product functions as an adhesion promoter and coupling agent.

Gelest Inc.

Gelest SIG5840.0

Gelest (3- GLYCIDOXYPROPYL)TRIMETHOXYSILANE (SIG5840.0) is an epoxy-functional trialkoxy silane used as a component in aluminum metal bonding adhesives. This product functions as an adhesion promoter and coupling agent.

Cymer Chemical

SR3604-35 Polyamide-Imide Resin Solution

SR3604-35 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Cymer Chemical

SR3602-28 Polyamide-Imide Resin Solution

SR3602-28 is an aqueous version of the 3602 series (NMP solvent) of aromatic polyamide-imide resins, enabling further dilutions with water.

Cymer Chemical

SR3602-35W Polyamide-Imide Resin Solution

SR3602-35W is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Cymer Chemical

IsoCoat 401 Aromatic Polyamide-Imide Resin Solution

IsoCoat 401 is an aqueous aromatic polyamide- imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Cymer Chemical

SR3602-37W Polyamide-Imide Resin Solution

SR3602-37W is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Cymer Chemical

SR3603-30 Polyamide-Imide Resin Solution

SR3603-30 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.