products in Packaging & Assembly: Curing Agent

Dixie Chemical

Dixie Chemical NMA

NADIC methyl anhydride (NMA) is a liquid alicyclic anhydride commonly used to cure epoxy resins in many challenging applications, including fiber reinforced composites used in high performance aerospace and military applications, as well as mechanically demanding applications like filament wound bearings. The excellent electrical properties and high temperature performance make NMAcured epoxies outstanding materials for encapsulating electronic components and circuits. NMA demonstrates many excellent characteristics when used as a curing agent for epoxy resins

IGM Resins

Omnirad 2100

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Georgia-Pacific Chemicals

GP 2074

GP® 2074 is a phenolic novolac resin used as a curing agent for epoxy resins in molding compounds, copper clad laminates, coatings, and electrical applications.

Georgia-Pacific Chemicals

GP 2056

GP® 2056 epoxy hardener is a flake phenolic novolac resin developed by Georgia-Pacific Chemicals as a curing agent for epoxy resins in oilfield, molding compounds, coatings, copper clad laminates, and electrical applications.

Reichhold

EPOTUF® 37-618

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

IGM Resins

Omnirad 379

Omnirad 379 is a highly efficient UV-curing agent used to initiate the photo polymerization of unsaturated prepolymers in combination with mono- or multifunctional monomers. Omnirad 379 is especially suitable for pigmented UV-curable systems, photoresists and printing plates. Its excellent solubility (compared to Omnirad 369) makes it easy to incorporate into nearly all formulations.

Dixie Chemical

Dixie Chemical ECA 100

ECA 100 is a light colored, low viscosity liquid epoxy curing agent designed for use in converting epoxy resins to highly crosslinked polymers with excellent physical and electrical properties. ECA 100 performs well when used in demanding applications, such as filament winding, pultrusion, and other forms of lamination, as well as electrical encapsulating, insulating, casting, and potting. ECA 100 imparts ease of handling due to low viscosity, low toxicity and low volatility. It is a mixture, which is a liquid at normal room temperature. If the product crystallizes, it should return to liquid by heating 38-55°C (100- 130°F) for 2-8 hours.

A&C Catalysts

Resicure® EMI-24

Resicure® EMI-24 is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 1-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 3.0 phr. Resicure EMI-24 LV is a lower viscosity version of Resicure EMI-24.

A&C Catalysts

Technicure® 54

Technicure® 54 is commonly used as a cure accelerator in epoxy resin based formulations. Typical loading level as an accelerator is about 0.5 to 8 phr in a standard DGEBA type liquid epoxy resin EEW=190) based formulation.

Dixie Chemical

Dixie Chemical NMA-407

NADIC Methyl Anhydride 407 (NMA 407) curing agent formulated with an efficient latent proprietary catalyst that imparts high reactivity at process temperatures, while maintaining excellent pot life. NMA 407 is commonly used to cure epoxy resins in many challenging applications, including fiber reinforced composites used in high performance aerospace and military applications, as well as mechanically demanding applications. NMA 407 is ideal in processes such as pultrusion, filament winding and infusion of parts requiring excellent high temperature performance. The excellent electrical properties and high temperature performance make NMAcured epoxies outstanding materials for encapsulating electronic components and circuits.

Reichhold

EPOTUF® 37-606

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

Evonik

VERSALINK® P 250

VERSALINK® P 250 is an oligomeric diamine curative that exists as a waxy solid at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Furthermore, it can function as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

Evonik

VERSALINK® P 650

VERSALINK® P 650 is a liquid oligomeric diamine curative that remains in liquid form at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be used as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

Shandong Huijin Chemical

Shandong Huijin Chemical 651(400)

Shandong Huijin Chemical 651(400) polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Electrolube

Electrolube 2KPB

Electrolube 2KPB conformal coating reaction agent is required for Electrolube's innovative €˜2K' two part conformal coating systems and the next generation of UV Cure conformal coatings. Used in a similar fasion to traditional thinners, 2KPB0 is used at the correct mix ration during application via selective coating machine. Where 2KPB differs from the traditional thinner is that it contains the reaction agent required for the coating to commence curing, similar to how the Part B works in a resin system. Available in a 1 or 5 Liter, 2KPB is added to the 2K range Part A or the latest UVCL range, please check the TDS of the Product to see the suggested mix ratio's.

Dixie Chemical

Dixie Chemical MHHPA-KB

MHHPA-KB is a low color, low viscosity, pre-catalyzed epoxy curing agent with a proprietary catalyst.

Dixie Chemical

Dixie Chemical ECA 100NC

ECA 100NC is a low viscosity, light colored, non-crystallizing which blend is based blend of methylhexahydrophthalic anhydride, hexahydrophthalic anhydride, and methyltetrahydrophthalic anhydride.. This liquid anhydride epoxy curing agent is designed for converting epoxy resins to highly cross-linked polymers with excellent physical and electrical properties.

Shandong Huijin Chemical

Shandong Huijin Chemical 650

Shandong Huijin Chemical 650 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Reichhold

EPOTUF® 37-630

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

Designer Molecules

Designer Molecules ECAT- 434

Shandong Huijin Chemical

Shandong Huijin Chemical 650B

Shandong Huijin Chemical 650B polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Shandong Huijin Chemical

Shandong Huijin Chemical 300

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Designer Molecules

Designer Molecules ECAT- 243

Dixie Chemical

Dixie Chemical ECA 106K

ECA 106K is a low viscosity liquid anhydride epoxy curing agent based on methyltetrahydrophthalic anhydride. For convenience, it is pre-catalyzed with an accelerator that contributes to good glass transition temperature (Tg) in cured polymers. It is designed for use in converting epoxy resins to highly crosslinked polymers with excellent physical and electrical properties. ECA 106K is used in demanding applications including laminating and filament winding. It can also be used in electrical applications such as casting, potting and encapsulation.

Fine Orgokem

Finomide 1160

Finomide 1160 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

Reichhold

EPOTUF® 37-625

EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines. EPOTUF® 37-625 reacts at room temperature with solid or liquid epoxy resins.

Dixie Chemical

Dixie Chemical ECA 106

ECA 106 is a low viscosity liquid anhydride epoxy curing agent based on methyltetrahydrophthalic anhydride. For convenience, it is pre-catalyzed with an accelerator that contributes to good glass transition temperature (Tg) in cured polymers. It is designed for use in converting epoxy resins to highly crosslinked polymers with excellent physical and electrical properties. ECA 106 is used in demanding applications including laminating and filament winding. It can also be used in electrical applications such as casting, potting and encapsulation.

Huangshan Huahui Technology

Huangshan Huahui Technology N,N,N’,N’-Tetrakis (β-hydroxyethy) Adipamide HH8081

Huangshan Huahui Technology N,N,N’,N’-Tetrakis (β-hydroxyethy) Adipamide HH8081 is a tetra-functional group containing N,N,N',N-Tetrakis (β-hydroxyethy) adipamide (HAA). It is suitable for curing with carboxyl-terminated polyester or acrylic resin to produce exterior durable powder coatings with excellent mechanical properties and good weather durability. In comparison with TGIC, iť's non-toxic, and can be used to produce non skin irritant and safe outdoor powder coating.

Reichhold

EPOTUF® 37-640

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.

Designer Molecules

Designer Molecules ECAT- 353

Shandong Huijin Chemical

Shandong Huijin Chemical 650A

Shandong Huijin Chemical 650A polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Dixie Chemical

Dixie Chemical DDSA

Dixie dodecenylsuccinic anhydride (DDSA) is a slightly viscous liquid anhydride. DDSA can be used as an epoxy curing agent for electrical potting compounds, coatings, conductive adhesives, and syntactic foams and also as an intermediate in the preparation of corrosion inhibitors for oils and greases. It cane be used as a leather tanning agent. When used as an epoxy-curing agent, it has a long pot life at room temperature and gives excellent electrical properties and flexibility to castings. DDSA can be used in blends with other anhydrides to modify physical properties of the mixture and to lend flexibility and reduce brittleness of cured polymers.

Reichhold

EPOTUF® 37-620

EPOTUF® 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF® epoxy resins.

IGM Resins

Omnirad 369

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

Designer Molecules

Designer Molecules ECAT- 259