products in Packaging & Assembly: Electrical/Electronic Applications

Nylene

Nylene® 401D

Nylene Specially formulated nylon 6 molding resin possessing outstanding flow characteristics Ideally suited for applications requiring high flow properties and resistance to cracking Optimum processing conditions should provide a melt temperature of 450 - 470°F at nozzle

Momentive Performance Materials

Silopren™ LSR 7090

Momentive Performance Materials

Silopren™ LSR 7030

Momentive Performance Materials

Silopren™ LSR 2680 FC

Momentive Performance Materials

Silopren™ Electro 242-1

Silopren™ Electro 242-1 TP 3717 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulators.Key Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-1 TP 3717 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-1 TP 3717 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Momentive Performance Materials

Silopren™ Electro 242-2

Silopren™ Electro 242-2 TP 3750 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulatorsKey Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-2 TP 3750 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-2 TP 3750 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

BCC Products

BCC Resins™ BC 9060

BC 9060 is a blue colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9060 is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

Momentive Performance Materials

Silopren™ LSR 2665

Momentive Performance Materials

Silopren™ Gel 6209

Silopren™ Gel 6209 is a kit matched easily pourable, solvent free, clear and colorless two-component silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. The cure rate can be accelerated significantly by heat.Key Features and Benefits Convenient 1:1 mixing by weight Low Viscosity, free of solvents Room temperature cure Mechanical shock/ vibration damping properties Very soft gel, tacky to many substrates Potential Applications Silopren™ Gel 6209 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and potting of cable joints. Silopren™ Gel 6209 can also be used for other applications that require a clear, tacky gel with good dampening properties.

Momentive Performance Materials

Silopren™ LSR 7070 FC

Momentive Performance Materials

Silopren™ LSR 7060

Silopren™ LSR 7060 liquid silicone rubber is a two-component, high-transparency, medium-hardness, low-viscosity, fast-cure speed and ultra clear liquidsilicone rubber (LSR). Providing good optical clarity, Silopren™ LSR 7060 liquid silicone rubber combines typical LSR properties, such as high temperaturestability and flowability, with excellent UV and blue light stability. As a result, molded lenses produced using this material can exhibit excellent durabilityand maintain optical clarity, even if exposed to high temperatures or UV light. Due to its high flowability, Silopren™ LSR 7060 liquid silicone rubber can helpenable excellence in manufacturing complex and micro-structure optical lenses, even in large quantities, utilizing the injection and compression moldingprocesses.Key Features and Typical Benefits Optical Clarity Durability Design Freedom Productivity Potential Applications Interior and exterior lighting - lenses and other illumination optics Automotive lighting - lenses and light guides Electronics - Mobile phones, flash lenses, sensing lenses, light guides and other optics Solar - primary optics for concentrating PVs.

Momentive Performance Materials

SilTRUST™ TSE3667

SilTRUST™ TSE3667 is a two-component condensation cure silicone rubber designed for electric potting. SilTRUST TSE3667 cures at room temperature to form an elastic flame retardant rubber and adheres to various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits Flame retardant : UL94V-0 recognized (File No.E56745) Low viscosity allows for excellent flowability Fast Cure Excellent deep section cure Excellent adhesive properties : primerless adhesion to many types of substrates No cure inhibition Potential Applications Potting of electric and communications parts Moisture proof sealing of meters Moisture proof coating of electric circuit boards.

Evonik

ALBIFLEX® 297

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

Nanocyl

PLASTICYL™ PBT1501

PLASTICYL™ PBT1501 is a conductive masterbatch based on Polybutylene Terephthalate loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ PBT1501 is ideal for injection molding and extrusion processes.

BEWI

BEWI A-910p

Bewi A-910P is an expandable polystyrene grade containing pentane as a blowing agent. It is a special, antistatic grade. The products are delivered in the form of spherical beads with a bulk density of about 0.6 g/cm3 and is available in 1100 kg octabins.

BEWI

BEWI A-710p

Bewi A-710P is an expandable polystyrene grade containing pentane as a blowing agent. It is a special, antistatic grade. The products are delivered in the form of spherical beads with a bulk density of about 0.6 g/cm3 and is available in 1100 kg octabins.

Crosslink Technology Inc.

Crosslink Technologies CLR1946

CLR1946 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

Nanocyl

PLASTICYL™ PA1503

PLASTICYL™ PA1503 is a conductive masterbatch based on polyamide 6 loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ PA1503 is ideal for injection molding and extrusion processes.

Crosslink Technology Inc.

Crosslink Technologies XR61406

XR61406 is a low density epoxy casting system. product is recommended for reducing weight, when casting and potting small electronic modules. Product is suitable for operating in environments from -40c. to +120c.

Nanocyl

PLASTICYL™ LDPE2001

PLASTICYL™ LDPE2001 is a conductive masterbatch based on Low Density Polyethylene (LDPE) loaded with 20% of Nanocyl’s MWCNTs (NC7000™). Because of its low viscosity and high flow, PLASTICYL™ LDPE2001 is ideal for injection molding and extrusion processes.

Crosslink Technology Inc.

Crosslink Technologies CLH5185

CLH5185 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

KMI Group

Elastoflo 60A-300

Elastoflo 60A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Nanocyl

PLASTICYL™ HIPS1001

PLASTICYL™ HIPS1001 is a conductive masterbatch based on high impact polystyrene. Because of its low viscosity and high flow formulation, PLASTICYL™ HIPS1001 is ideal for standard injection molding and extrusion processes.

Crosslink Technology Inc.

Crosslink Technologies XPD1278

XPD1278 is a low viscosity, two component, polyurethane casting resin specifically designed for casting transformers, coils and electronic components. The cured product has excellent thermal shock resistance.

Crosslink Technology Inc.

Crosslink Technologies CLH6500

CLH6500 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

HiFi Industrial Film

HiFi Industrial Film SU320

HiFi Industrial Film SU320 Is a high clarity, high gloss, heat-stabilized polyester film manufactured by HiFi Industrial Film. It has an adhesion promoting pre-treat on both sides and is suitable for flexible circuits, membrane touch switch, specialized graphics and other applications where it is important to have the minimum level of shrinkage during processing.

Crosslink Technology Inc.

Crosslink Technologies CLR1157

CLR1157 is a heat cure, low stress, extremely tough, epoxy casting compound. The product was specifically designed for casting electrical motors. the cured material exhibits excellent thermal stability and thermal cycling characteristics.

Crosslink Technology Inc.

Crosslink Technologies XRD1018

XRD1018 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.

MECO

MECOSTAT® 3/562

MECOSTAT-3/562 is a highly effective liquid additive for antistatic finishing ofexpandable polystyrene and polypropylene.The antistatic agent acts even at a low relative humidity and provides a stable,permanent antistatic finishing for several years.

Nanocyl

PLASTICYL™ ABS1501

PLASTICYL™ ABS1501 is a conductive masterbatch based on ABS resin loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ ABS1501 is ideal for injection molding and extrusion processes.

Nanocyl

PLASTICYL™ EVA2001

PLASTICYL™ EVA2001 is a conductive masterbatch based on Ethylene Vinyl Acetate (EVA) loaded with 20% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ EVA2001 is ideal for injection molding and extrusion processes.

BCC Products

BCC Resins™ BC 9040T

BC 9040T is a clear, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9040T is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

Nanocyl

PLASTICYL™ PC1501

PLASTICYL™ PC1501 is a conductive masterbatch based on polycarbonate loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its low viscosity and high flow, PLASTICYL™ PC1501 is ideal for injection molding and extrusion processes.

MECO

MECOSTAT® 3/535

MECOSTAT-3/535 is a highly effective liquid additive for antistatic finishing ofexpandable polystyrene and polypropylene.The antistatic agent acts even at a low relative humidity and provides a stable,permanent antistatic finishing for several years.

Crosslink Technology Inc.

Crosslink Technologies CLR1331

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

KMI Group

Elastoflo 30A-300

Elastoflo 30A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.