products in Potting Compounds

Mitsubishi Chemical Group Corporation

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Bomar Specialties LLC

Bomar Oligomers® BR-641D

Bomar™ BR-641D is a Polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass,and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene,and Polypropylene.

Mitsubishi Chemical Group Corporation

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Cosmic Plastics

DAP D72/6120F

DAP D72/6120F is a versatile diiallyl ortho-phthalate molding compound, filled with short glass fibers and featuring flame retardant properties. Supplied in a free-flowing granular form, this compound is well-suited for a variety of molding applications. It can be easily molded using compression, transfer, or injection equipment and can be preformed with ease. An important distinction is that it has passed NASA outgassing tests, indicating its suitability for applications with stringent outgassing requirements, particularly in industries like aerospace where such standards are critical.

AB Specialty Silicones

Andisil® VS 165,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® VS 100

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Cosmic Plastics

Cosmic Epoxy E4920

Cosmic Epoxy E4920 is a mineral-filled epoxy molding compound available either in granular form or preformed in various sizes and weights. It features excellent moisture resistance, thermal cycling stability, and remarkable moldability. Furthermore, parts molded from this material do not support fungus growth, and it is specifically designed for the encapsulation of passive devices, including capacitors, inductors, diodes, and rectifiers.

AB Specialty Silicones

Andisil® TL 28

Andisil® TL 28 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

Bomar Specialties LLC

Bomar Oligomers® BR-640D

Bomar™BR-640Dis a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640Dwithstands the extremes of temperature typical of such tests, without undue degradation of properties.Excellent hydrophobic properties exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS.

Atmos Technologies

Vycel U

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

Dixie Chemical

Dixie Chemical NMA

NADIC methyl anhydride (NMA) is a liquid alicyclic anhydride commonly used to cure epoxy resins in many challenging applications, including fiber reinforced composites used in high performance aerospace and military applications, as well as mechanically demanding applications like filament wound bearings. The excellent electrical properties and high temperature performance make NMAcured epoxies outstanding materials for encapsulating electronic components and circuits. NMA demonstrates many excellent characteristics when used as a curing agent for epoxy resins

Momentive Performance Materials

Silopren™ LSR 7090

AB Specialty Silicones

Andisil® VS 65,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Reichhold

EPOTUF® 37-618

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

Carpenter Company

CARPOL® GP-700

CARPOL® GP-700 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, Carpol® GP-700 may also be included as component in other urethane products and formulations.

Smooth On

Smooth-Cast™ ONYX™ SLOW

Smooth-Cast™ ONYX™ SLOW is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.

Hapco Inc.

Sympoxy™ 1010-CA810

A clear amber, 100% solids, room temperature curing epoxy system with a convenient 1:1 mix ratio by volume. 1010-CA810 is great for electrical potting and encapsulating, industrial surface coating, wood surface coat and seal coat. This product cures to a hard, shiny, high gloss finish that is free from “amine blushing” under all humidity conditions.

Momentive Performance Materials

Silopren™ LSR 7030

AB Specialty Silicones

Andisil® VS 500

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 80,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 400

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Carpenter Company

CARPOL® GP-5015

CARPOL® GP-5015 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, Carpol® GP-5015 may also be included as a component in other urethane products and applications.

Momentive Performance Materials

Silopren™ LSR 2680 FC

Malvern Minerals

Novacite® 1250

Novacite® 1250 is a premium 325 mesh product. Normally, it is 100% finer than 44µ. This outstanding product has been preferred for over 35 years in thermoset molding compounds. We would not hesitate to recommend 1250 Novacite® for almost any application in the polymer field in its range of fineness.

Carpenter Company

CARPOL® GP-3000

CARPOL® GP-3000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-3000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® GP-4000

CARPOL® GP-4000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-4000 may also be included as a component in other urethane products and formulations.

Momentive Performance Materials

Silopren™ Electro 242-1

Silopren™ Electro 242-1 TP 3717 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulators.Key Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-1 TP 3717 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-1 TP 3717 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Momentive Performance Materials

Silopren™ Electro 242-2

Silopren™ Electro 242-2 TP 3750 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulatorsKey Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-2 TP 3750 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-2 TP 3750 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Cosmic Plastics

DAP D33/6120

DAP D33/6120 is a versatile general purpose diallyl ortho-phthalate molding compound that incorporates short glass fibers for added strength. Supplied in a free-flowing granular form, it is designed for ease of use in molding applications. This compound can be easily molded using compression, transfer, or injection equipment, and it can also be readily preformed to suit the specific requirements of the application. Its blend of properties makes it suitable for a range of molding applications where strength and versatility are essential.

AB Specialty Silicones

Andisil® VS 20

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® TL 10

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.