products in Packaging & Assembly

Chem-Mat Technologies Inc.

Chem-Mat Technologies Inc. UV095LV

Chem-Mat Technologies Inc. UV095LV is an Acu-Tite light-curing adhesive that is 100% solid and solvent-free environmentally friendly adhesive.

NuSil Technology

NuSil™ CV1-2964

NuSil™ CV1-2964 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W /m-K, Primed Lap Shear 120 psi (0.8 MPa).

W.C. Richards Company

W.C. Richards Company POLYESTER TGIC POWDER

POLYESTER TGIC POWDER offer good UV resistance and weatherability. In addition, a wide range of thicknesses are possible. This allows heavy coatings on substrates requiring outdoor stability where polyurethanes will not suffice due to their limited film thickness range. This coating also provides excellent flexibility and mechanical properties.

Permabond Engineering Adhesives

PERMABOND® TA439

PERMABOND® TA439 is a two component structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some plastics. The typical fixture time of is 20-40 seconds. The fast fixture time of TA439 makes it an ideal adhesive for high speed production lines. This product provides high strength, tough, durable bonds with good impact resistance and performs well in drop tests.

Ex-Tech Plastics

VERSATECH™ PET 3420

ExTech Plastics is proud to introduce the newest addition to our PET product offering. The VERSATECH™ PET 3420 (2-lane Black/Clear PET) and the VERSATECH™ PET 3430 (3-lane Clear/Black/Clear PET). Utilizing the best material as a base of manufacturing, ExTech Plastics brings to market the new VERSATECH™ 3420 and 3430 material with unrivaled quality. These products provide supreme clarity and impact resistance properties. VERSATECH™ 3420 & 3430 SIDE BY SIDE PET is ideal for a wide variety of applications like food, automotive, medical, electronic, consumer and industrial packaging.

Lesco Chemical Limited

LESTAC P120

LESTAC P120 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Aptek Laboratories

Aptek® 2214-A/B

Aptek® 2214-A/B is a carbon-filled, thixotropic, two component, electrically conductive, flexible urethane coating/adhesive designed to dissipate an electrostatic charge. This low-outgassing system provides a combination of high flexibility and good tensile strength/elongation characteristics. Aptek® 2214-A/B Space Grade, Low Modulus Urethane ESD Coating/Adhesive.

Hofmann Men-Manufaktur

DuploCOLL® 101 HCR

DuploCOLL® 101 HCR is an high temperature and chemical resistant sealing tapes.

NuSil Technology

NuSil™ CF20-2186

NuSil™ CF20-2186 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and SealantsComments: Longer Work Time.

Momentive Performance Materials

Silopren™ LSR 2670 FC

BB Resins

BB Resins BB-Amide 5036

BB Resins BB-Amide 5036 a reactive high viscosity polyamide resin.

Silicone Solutions

Silicone Solutions SS-155

Silicone Solutions SS-155 is a UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast UV cure. SS-155 is a 1-part silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing in shadowed areas. SS-155 works well in manual and automatic dispensing equipment.

Abatron

Abocoat 8501-1™

Abocoat 8501-1™ is a Coating with Exceptionally High Resistance To Acids, Alkalis, Solvents, Acetone, Alcohol, & Gasohol. High Solids 2-Component, Fast-Setting Epoxy System.

Kraton

UNI-REZ™ 2678

UNI-REZ 2678 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2678 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

NAMICS-Diemat

Chipcoat G8345-6

NAMICS-Diemat Chipcoat G8345-6 is a dam-and-fill encapsulant. It has low warpage and high fluidity.

Kraton

Kraton™ D1102 K

Kraton D1102 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 28%. It is supplied from North America in the physical form identified below. Kraton D1102 KT - supplied as a dusted porous pellet Kraton D1102 KU - supplied as an undusted porous pellet Kraton D1102 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

DELO

DELO DUALBOND® AD 345

DELO DUALBOND® AD 345 is a modified polycarbamin acid derivate , 1C , light-fixable / heat-curing free of solvents , filled , light-fixable & has low-temperature-curing.

Kraton

Kraton™ D1101 K

Kraton D1101 K is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D1101 KT - supplied as a dusted porous pellet Kraton D1101 KU - supplied as an undusted porous pellet Kraton D1101 KIM - supplied as a dusted powder Kraton D1101 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Crosslink Technology Inc.

Crosslink Technologies CLH5515

CLH5515 is a two component, unfilled, heat cure epoxy system. It was specifically developed for impregnating coils. The cured material exhibits excellent thermal stability and thermal cycling characteristics.

Crosslink Technology Inc.

Crosslink Technologies CLH6020

CLH6020 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.

Momentive Performance Materials

SPUR+™ 3040 Prepolymer

SPUR+™ 3040 prepolymer is an excellent candidate to consider as a binder for high strength adhesives requiring adhesion to a variety of substrates. The low viscosity o SPUR+™ 3040 prepolymer has shown it to be easy to formulate and use for the manufacture of adhesives. Many applications have benefited from the excellent heat resistance of SPUR+™ 3040 prepolymer in circumstances where thermal stability is required.

Nizhnekamskneftekhim

Nizhnekamskneftekhim ABS plastic 1534

Nizhnekamskneftekhim ABS Plastic 1534 is an easy flow, molding grade, with a medium heat resistance and impact strength, enhanced heat resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals. It is produced self-colored only, additives/ dye free.

DELO

DELO DUALBOND® GE4906

Delo Dualbond® GE4906 is a modified acrylate , 1C , UV- / Vis a - / humidity-curing free of solvents , dual-curing.

Kraton

UNI-REZ™ 2238

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

Reltek

BONDiT™ B-755

BONDiT™ B-755 is a unique low viscosity, two-part, high strength, 100% solids, room-temperature curing semi-rigid cyclo-aliphatic epoxy resin system with good scratch and impact resistance. Suitable for clear coat, conformal coating and electrical potting applications. The B-755 handles harsh environments easily and is effective against moisture, salt water, acids, alkalies, oils, fuels, solvents and detergents. B-755 produces very low extract products in soak tests and provides corrosion resistance.

BB Resins

BB Resins BB-Amide 5011

BB Resins BB-Amide 5011 is a low viscosity polyamidoimidazoline resin.

DELO

DELO KATIOBOND® 4578

DELO KATIOBOND® 4578 is a modified epoxy resin , 1C , preactivated free of solvents , unfilled, thixotropic , preactivated, electrically insulating.

Takaroku Shoji

Takaroku Shoji TRF-PS02-21

Takaroku Shoji TRF-PS02-21 is our unique filler dispersion and blending technology, excellent electrical conductivity performance can be imparted to various thermoplastic resins.

Momentive Performance Materials

SilTRUST™ TSE3664K

SilTRUST™ TSE3664K is a two-component condensation cure silicone rubber designed for electric potting. TSE3664 K cures at room temperature to form an elastic flame retardant rubber and adheres various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits flame retardant: UL94V-0 recognized (File No. E56745) low viscosity allows for excellent flowability fast cure excellent deep section cure excellent adhesive properties: primerless adhesion to many types of substrates no cure inhibition Potential Applications potting of electric and communications parts moisture proof sealing of meters moisture proof coating of electric circuit boards.

DELO

DELO KATIOBOND® 45952

DELO KATIOBOND® 45952 is a modified epoxy resin , 1C , preactivated free of solvents , unfilled, thixotropic , preactivated, electrically insulating, tension-equalizing.

Takaroku Shoji

Takaroku Shoji TRF-PC-PC10

Takaroku Shoji TRF-PC-PC10 is our unique filler dispersion and blending technology, excellent electrical conductivity performance can be imparted to various thermoplastic resins.

Bada AG

Badaprene® TPV 55A 1041

DELO

DELO KATIOBOND® 4594

DELO KATIOBOND® 4594 is a modified epoxy resin , 1C , preactivated free of solvents , unfilled, thixotropic , preactivated, electrically insulating.

Momentive Performance Materials

Silopren™ Gel 6209FC

Silopren™ Gel 6209FC is a kit matched easily pourable, solvent free, clear and colorless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1:1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties.Key Features and Benefits Convenient 1: 1 mixing by weight Low viscosity, free of solvents Fast room temperature cure Soft, tacky gel, sticking to many substrates Mechanical shock and vibration damping properties Useful temperature range -50°C to 150 °C Potential ApplicationsSilopren™ Gel 6209FC is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required.

Kraton

Kraton™ D1163 P

Kraton D1163 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1163 PT - supplied as a dusted dense pellet Kraton D1163 PTM - supplied as a dusted powder Kraton D1163 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Crosslink Technology Inc.

Crosslink Technologies XHD1019

XHD1019 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.