products in Batteries

Evonik

VESTAMID® X7297 BK 9.7507

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

Evonik

VESTAMID® L2124

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

Evonik

VESTAMID® eCO LX9039 BBM100

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

Evonik

VESTAMID® LX9013 BK 9.7507

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

SABIC's Specialties Business

ULTEM™ Resin 2100

SABIC's Specialties Business ULTEM™ Resin 2100 is a polyetherimide (PEI), 10% Glass fiber filled, standard flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin N225X

SABIC's Specialties Business NORYL™ N225X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N225X resin offers good dielectric strength and strong electrical performance in addition to low moisture absorption and dimensional stability, This material is an excellent candidate for both indoor and outdoor electrical applications.

SABIC's Specialties Business

ULTEM™ Resin 2400

SABIC's Specialties Business ULTEM™ Resin 2400 is a standard flow 40% glass fiber reinforced polyetherimide resin. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers offering UL94 V0 ratings and FAR25.853 performance. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin N190X

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

SABIC's Specialties Business

NORYL™ Resin NHP5054

NORYL NHP5054 Resin is a glass fiber-reinforced PPE and PS blend well-suited for evaluation in electric vehicle battery housings, automotive enclosures, electrical components, and components that need thin-wall flame resistance, modulus retention, and high heat resistance. NORYL NHP5054 Resin is an injection-moldable material that contains non-brominated, non-chlorinated flame retardant.NORYL NHP5054 Resin features include:A UL94 flame rating of V0 at 0.75mmGood dimensional stabilityHigh heat resistanceStrong electrical performanceLow specific gravityThe resin is well-suited for evaluation in electric vehicle battery housings, automotive enclosures, electrical components, and components that need thin-wall flame resistance, modulus retention, and high heat resistance.This product does not contain PFAS intentionally added during SHPP’s manufacturing process. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2210

SABIC's Specialties Business ULTEM™ Resin 2210 is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C). ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin CN1134

SABIC's Specialties Business NORYL™ CN1134 resin is a 20% mineral and glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high modulus, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm. NORYL™ CN1134 resin exhibits good dimensional stability, low moisture absorption, and high rigidity. It is an excellent candidate for printer chassis and electric vehicle battery (EV) applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2200R

SABIC's Specialties Business ULTEM™ Resin 2200R is a 20% Glass fiber filled, standard flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LNP™ ELCRES™ FXP1430

SABIC's Specialties Business ELCRES FXP1430 is PC-siloxane copolymer in special "Luster Plus" pearlescent appearance, which is part of the VisualFx family. This product features vivid and resplendent look with improved ductility and medium flow. UV stabilized. Color package may affect performance. Applications include housing of consumer electronics, cosmetic packaging, automotive interior decoration, etc.

SABIC's Specialties Business

NORYL GTX™ Resin GTX964W

SABIC's Specialties Business NORYL™ GTX964W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits very high impact resistance and high flow. This injection moldable grade was designed for large parts, such as automotive body panels, and thin wall applications

SABIC's Specialties Business

LNP™ ELCRES™ EXL9034

SABIC's Specialties Business LNP ELCRES EXL9034 is based on Polycarbonate (PC) siloxane copolymer resin with excellent low temperature ductility, robust flame retardancy (V0/5VA), good processability and electrical tracking resistance. It is UV stabilized with F1 rating and is a good candidate for applications like photovoltaic connectors.

SABIC's Specialties Business

ULTEM™ Resin 2100R

SABIC's Specialties Business 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2210R

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2110

SABIC's Specialties Business ULTEM™ Resin 2110 is a 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin N1050

SABIC's Specialties Business NORYL™ N1050 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade was designed for improved dimensional stability and flow. This grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 1.5mm along with impact strength, very low moisture absorption, excellent dimensional stability, and good electrical properties. NORYL™ N1050 resin is an excellent candidate for a variety of applications requiring electrically insulating properties, low moisture absorption and low warpage.

SABIC's Specialties Business

NORYL™ Resin SE1GFN3

SABIC's Specialties Business NORYL SE1GFN3 resin is a 30% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL SE1GFN3 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2110R

SABIC's Specialties Business 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2212R

20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.

SABIC's Specialties Business

ULTEM™ Resin CRS5011

SABIC's Specialties Business Transparent, Enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin CRS5311

SABIC's Specialties Business 30% Glass fiber filled, enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2410R

SABIC's Specialties Business 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin CRS5301

SABIC's Specialties Business 30% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2410

SABIC's Specialties Business 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin CRS5201

SABIC's Specialties Business 20% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin N1250

NORYL N1250 Resin is a durable, heat-resistant, and flame-retardant plastic blend of PPE and PS with excellent dimensional stability and electrical insulating properties, for potential use in evaluation in electrical and consumer electronic applications. NORYL N1250 Resin is a non-reinforced blend of polyphenylene ether (PPE) and polystyrene (PS). This resin: -    Has high heat resistance, meaning it can withstand high temperatures without degrading -    Contains non-brominated and non-chlorinated flame retardants  -    Has a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm -    Has low moisture absorption -    Is an injection-moldable grade NORYL N1250 Resin’s enhanced dimensional stability allows it to retain its shape and size under various conditions. NORYL N1250 Resin has good electrical insulating properties, making it well suited for evaluation in electronic components such as charger and adapter housings.

SABIC's Specialties Business

ULTEM™ Resin 2312

SABIC's Specialties Business 30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin SE1GFN2

SABIC's Specialties Business NORYL™ SE1GFN2 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business

NORYL™ Resin HS2000X

SABIC's Specialties Business NORYL™ HS2000X resin is a 17% mineral reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V0 at 1.5m along with UL746C Outdoor Suitability rating of F1. NORYL™ HS2000X resin exhibits strong electrical performance, dimensional stability, very low moisture absorption, and hydrolytic stability. This material is an excellent candidate for electronic / electrical indoor and outdoor applications including air conditioner parts, smoke detector covers, pool + spa pump parts and housings.

SABIC's Specialties Business

NORYL™ Resin PX5373

SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business

ULTEM™ Resin CRS5201R

SABIC's Specialties Business 20% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

NORYL™ Resin SE1GFN1

SABIC's Specialties Business NORYL™ SE1GFN1 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI 110C. NORYL™ SE1GFN1 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for appliance internals, indoor and outdoor electrical enclosures / housings / connectors.

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® BPC 80 Natural

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding