products in Parts & Components: Binder & Resin

Mitsubishi Chemical Group Corporation

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ Epoxy YX7110

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

WEVO-CHEMIE GmbH

WEVOPUR 512 FL

WEVOPUR 512 FL is known for highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions.

Mitsubishi Chemical Group Corporation

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

WEVO-CHEMIE GmbH

WEVOPUR 552 FL

WEVOPUR 552 FL is known for highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions.

Foreverest Resources

Foreverest Resources Glyceryl Hydrogenated Rosinate (Industrial) C8

Foreverest Resources Glyceryl Hydrogenated Rosinate (Industrial) C8 is a Glycerol Ester of Hydrogenated Rosin, GEHR, Ester Of Hydrogenated Rosin. Glyceryl Hydrogenated Rosinate, also called Glycerol Ester of Hydrogenated Rosin (GEHR) and Ester Of Hydrogenated Rosin, is esterified from refined hydrogenated rosin and edible glycerol.

WEVO-CHEMIE GmbH

WEVOPUR 390

WEVOPUR 390 is known for highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions.

WEVO-CHEMIE GmbH

WEVOPUR PD 445

WEVOPUR PD 445 is known for highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions.

Arakawa Chemical

HYPALE CH

Hypale CH is a hydrogenated rosin developed by Arakawa chemical industries Ltd. It provides excellent resistance to oxidation and is stable under the storage of long period.

Evonik

Evonik Polymer VS 165000

Evonik Polymer VS 165000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik

Evonik VQM 909

Evonik VQM 909 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik

Evonik Polymer VS 1000

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik

ALBIFLEX® 297

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

Evonik

Evonik Polymer OH 2

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

Evonik

Evonik Polymer VS 500

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik

Evonik VQM 973

Evonik VQM 973 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik

Evonik Polymer VS 100

Evonik Polymer VS 100 comprises vinyl-terminated polydimethyl siloxanes available in various viscosity levels and molecular weights, featuring an impressively low content of volatile constituents. These polymers serve as essential base components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents, combined with the crosslinking mechanism, ensures low curing shrinkage and prevents the formation of volatile or corrosive substances during the curing process.

Evonik

ALBIFLEX® 246

ALBIFLEX® 246 is an innovative Bisphenol-A-epoxy silicone block copolymer resin designed for crafting high-performance elastomers. This liquid resin, active with epoxy, seamlessly cures when paired with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 246 offers versatility, supporting various casting and molding methods for your manufacturing needs.

Evonik

Evonik VQM 907

Evonik VQM 907 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik

Evonik Polymer VS 10000

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik

Evonik Polymer VS 200

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Esschem

Esschem EMA - EHMA Bead Copolymers

Esschem EMA - EHMA Bead Copolymers are a unique combination of ethyl methacrylate (EMA) and 2-ethylhexyl methacrylate (EHMA) that offers exceptional properties.The incorporation of 2-EHMA disrupts the polymer chain packing, resulting in lower glass transition temperatures and enhanced low-temperature flexibility, while significantly improving transparency.With variations in molecular weight, Esschem can further enhance the strength and flexibility of these bead copolymers. The smaller particle size of the beads improves processability and has the potential to enhance transparency, while larger particles contribute to a more rigid material.

Esschem

Esschem MMA - HPMA Bead Copolymers

Esschem MMA - HPMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with hydroxypropyl methacrylate (HPMA). These bead copolymers offer exceptional performance and customizable properties for various applications. With increased MMA content, these copolymers exhibit elevated glass transition temperatures, melting points, and tensile strengths, providing enhanced strength and durability. Conversely, higher HPMA content improves adhesion and reduces glass transition temperatures, melting points, and tensile strengths, offering flexibility and tailored characteristics. Esschem further enhances the molecular weight of these copolymers, resulting in more rigid and durable materials. By manipulating the particle size, solubility, dispersion properties, and transparency can be optimized, making them ideal for applications that demand transparency, strength, and toughness.

Esschem

Esschem MMA - EMA Bead Copolymers

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

Esschem

Esschem MMA Bead Copolymers

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Esschem

Esschem EMA - EGDMA Bead Copolymers

Esschem EMA - EGDMA Bead Copolymers are a versatile combination of ethyl methacrylate (EMA) and ethylene glycol dimethacrylate (EGDMA). With a higher proportion of EMA, these copolymers exhibit enhanced flexibility due to the less bulky ethyl group present in EMA. Conversely, increasing the EGDMA content results in a more crosslinked structure, leading to greater rigidity. The glass transition temperature remains relatively stable regardless of the percentage of each constituent. By precisely controlling the molecular weight, Esschem can optimize the level of crosslinking, resulting in superior mechanical properties such as hardness and tensile strength. Additionally, the particle size can be tailored to influence surface area and reactivity, allowing for further adjustment of the physical properties.

Esschem

Esschem MMA - BMA Bead Copolymers

Esschem MMA - BMA Bead Copolymers are a range of copolymers combining methyl methacrylate (MMA) with butyl methacrylate (BMA).These copolymers offer a versatile solution with varying properties based on the MMA and BMA content. Higher MMA content results in copolymers with elevated glass transition temperatures, melting points, and tensile strengths, making them suitable for applications that require strength and rigidity. Conversely, increased BMA content lowers these properties while enhancing processability and potential flexibility.By adjusting the molecular weight, Esschem can tailor the copolymer structure to achieve specific rigidity requirements. Additionally, controlling the particle size allows for improvements in mechanical strength, with smaller particles offering larger surface area to volume ratios.

Esschem

Esschem MMA - Styrene Bead Copolymers

Esschem MMA - Styrene Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) and styrene. These bead copolymers offer a wide array of properties and applications. With increased MMA content, the resulting materials exhibit remarkable strength and transparency. Conversely, a higher proportion of styrene enhances hydrophobicity, hardness, and impact resistance. The molecular weight plays a crucial role in determining the characteristics of the copolymers. Higher molecular weights, often associated with increased styrene content, yield stronger and more heat-resistant materials. Esschem's ability to manipulate the molecular weight distribution allows for customized properties such as durability, elasticity, and processing ease. Additionally, the particle size of the copolymers influences surface properties and rigidity.

Esschem

Esschem Bio-plasticized / MMA Bead Polymers

Esschem incorporates sustainable plant-based plasticizers into methyl methacrylate MMA bead polymers. These innovative additives are designed to enhance the flexibility and workability of methacrylate-based polymers. By incorporating bio-plasticizers into MMA bead copolymers, the resulting materials exhibit increased flexibility and reduced glass transition temperature, melting points, and tensile strengths.The inclusion of higher molecular weight components contributes to stronger and more heat-resistant materials.Furthermore, the particle size plays a crucial role in surface properties, where smaller particles enhance adhesion while larger particles contribute to robustness and rigidity.

Esschem

Esschem EMA Bead Copolymers

Esschem EMA Bead Copolymers are a range of bead polymers synthesized from ethyl methacrylate (EMA) that offers the strength of polymethyl methacrylate (PMMA) with slightly different properties.The copolymers exhibit a slightly lower glass transition temperature, resulting in a softer and more flexible final product compared to PMMA.By controlling the molecular weight, Esschem can customize the heat resistance and strength of the polymer, making it suitable for various applications across multiple industries.The smaller particle size of the beads enhances surface properties like adhesion, while larger particles contribute to a more robust and rigid material.