Electrical & Electronics
20,843 products found in Electrical & Electronics
DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.
Delrin® 150 NC010
Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.
VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.
ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-dodecyclhexandecanol and is also referred to as C28 Guerbet alcohol.
Delrin® 500P NC010
Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.
Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.
Mitsubishi Chemical Group
jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jERTM YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Zytel® 101L NC010
Zytel® 101L NC010 is a lubricated polyamide 66 resin for injection molding.
Kalrez® Spectrum™ 6375
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
Mitsubishi Chemical Group
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Delrin® FG500SC NC010
Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin@ FG500P. It is designed for cube-blending with any grade of Delrin@ for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.
Delrin® 100 NC010
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
Zytel® 101 NC010
Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.
Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-decyl-1-tetradecanol and is also referred to as C24 Guerbet alcohol. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Zytel® 103HSL BKB080
Zytel® 103HSL BKB080 is a heat stabilized, lubricated polyamide 66 resin for injection molding.
Zytel® 101L BKB080
Zytel® 101L BKB080 is a lubricated polyamide 66 resin for injection molding.
Kalrez® Spectrum™ 7075
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Delrin® 100P NC010
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
Naxol® cyclohexanol is a versatile solvent and intermediate suitable for use in and/or production of agricultural and CASE (Coatings Adhesives Sealants and Elastomers) products, rubbers, plasticizers, and fragrance compounds. Naxol® cyclohexanol offers low toxicity and is produced to low moisture standards. Naxol® cyclohexanol may be used to provide extra freeze protection at temperatures as low as -5°C (23°C). High purity Naxol® cyclohexanol is used in the Building & Construction market for infrastructure, roads and paving applications. Also, high purity Naxol® cyclohexanol is used in the Electrical & Electronics market for the production of printed circuit boards and other semiconductor manufacturing applications. Additionally, high purity Naxol® cyclohexanol is used in the Home & Personal Care market as a solvent for fragrance compound.
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.
Chi Mei Corporation
WONDERLOY® PC-540 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant Flame Retardant Halogen Free
AdvanSix Acetone NF Grade
AdvanSix High Purity Acetone NF Grade meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of:Building and ConstructionConstruction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks.Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAutomotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications.Healthcare & PharmaOral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications.Paints & CoatingsArchitectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.
Mitsubishi Chemical Group
jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Mitsubishi Chemical Group
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
LOTTE Advanced Materials
INFINO SC-1220UR (PC Poly)
Light guiding, Standard
Mitsubishi Chemical Group
jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jERTM YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Zytel® 70G33L NC010
Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.
Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.
Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black
Mitsubishi Chemical Group
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Delrin® 500CL NC010
Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.