products in Electrical & Electronics

Bomar Specialties LLC

Bomar Oligomers® BRS-14320S

Bomar® BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications

Dynasol Elastomers

Paracril™ 3335

Paracril 3335 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Cosmo Chemical

COTIOX KA-100

Cotiox KA-100 is a titanium dioxide anatase type general grade. TiO2 has remarkable whiteness and tint strength for general use Best-quality anatase in the world.

3H Vinacom

3H Vinacom XLPE compound 3H VINACOM HA-5010

3H Vinacom XLPE compound 3H VINACOM HA-5010 is a silane cross-linkable polyethylene compound for low voltage electrical wire and cable insulation. Both the grafting and wire coating process are performed in one single step in the usual wire and cable production extruder for polyethylene and cross-linking takes place through a reaction involving water vapor after being extruded. Difficulty in maintaining dimensional accuracy during cross-linking is avoided because the temperature of cross-linking is below the crystalline melting point of the polymer. Therefore, 3H VINACOM XLPE HA-5010 allow cross-linked polyethylene wire and cable without the need for much capital in special equipment like peroxide or radiation cross-linking.

DIC Corporation

DIC.PPS® Z-240

Outline: Z-240 is a 40% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

PENTAC Polymer GmbH

Pentamid™ A L10 H black

Pentamid A L10 H black is a normal viscosity, impact modified, heat stabilized polyamide 66.

Grupa Azoty S.A

Tarnoform® 300 GB2

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V150

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Samyang Corporation

TRIREX® 3022L1(I2)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(I2) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(I2) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only.

Samyang Corporation

TRIEL® 5400

TRIEL® 5400 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America.

Teijin Limited

Multilon® TN-7500

PC/ABS polymer alloy, Non-halogen type flame resistant series

Peter Greven

LIGASTAR CA 800

3D Systems

Accura® CeraMAX

Accura® CeraMAX is a a rigid ceramic-reinforced composite with excellent thermal, moisture and abrasion resistance.applications heat and wear resistant components stiff/rigid assemblies and prototypes composite ceramic-like components esthetic components for art and archival models moisture stable components automotive and aerospace applications a plastic-ceramic composite high thermal resistance excellent abrasion resistance moisture resistant extremely rigid benefits esthetically beautiful white parts withstand temperatures of up to 220°C models that can withstand wear in aggressive applications components can survive in adverse thermal environments components can be plated parts retain properties & dimensions for extended durations.

Romira

ROTEC® ASA S 210

ROTEC® ASA S 210 is ASA, injection molding grade.

Teijin Limited

Panlite® L-1250Y

Teijin Limited Panlite® L-1250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® L-1250Y are: Flame Rated Good Mold Release Medium Viscosity

Arlon Electronic Materials

Arlon® 25N

Arlon 25N and 25FR are woven fiberglass reinforced, ceramic-filled composite materials engineered for use in microwave and RF multilayer printed circuit boards. Combining a non-polar thermoset resin system with a controlled-expansion ceramic filler, 25N and 25FR offer low dielectric constant and loss combined with a low Thermal Coefficient of Dielectric Constant (TCEr) for signal stability over a wide ambient temperature range. Designed for use in multilayer packages, 25N and 25FR offer prepregs that are identical in chemical composition and physical properties with their copper clad laminates for a completely homogeneous finished package for optimal signal integrity.The low dielectric constant (Er) and loss properties, low thermal coefficient of dielectric constant (TCEr), and excellent physical stability characteristics offered by 25N and 25FR materials make them ideal for wireless and digital applications, such as cellular telephones, down converters, low noise amplifiers, antennas and other advanced des ign circuits.Processing for 25N and 25FR materials is consistent with processing for standard high temperature thermoset based printed circuit board substrates.

Menzolit Ltd.

Menzolit® SMC 2300

menzolit® SMC 2300 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Idemitsu PS

Idemitsu PS HT50

Idemitsu PS HT50 is high impact polystyrene that is easy for mold ability, size stability and recyclability. High impact polystyrene feature high impact strength and with different characteristics that suit for various type of application. These grades have a good balance of flow rates and flexural modulus features.

Romira

ROTEC® ABS 1001 FR V0/4

ROTEC® ABS 1001 FR V0/4 is ABS, injection molding grade, easy-flowing, flame retardant.

Kraton

Kraton™ D1192 E

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Toray

Torelina® A673M

Toray Torelina® A673M is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Braskem America

UTEC® 4040

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Mitsubishi Chemical Group Corporation

METABLEN™ A 3000

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

METABLEN™ S 2030

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Sasol

Sasol MP45

Meta Para Cresol (85-91% max). It is used for wire enamel solvents, resins, feedstock for the production of meta-cresol and other chemical intermediates. The product is also called MP-Cresol 45. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Vamp Tech

Vamplen™ 2528 V0 CB

UL 94 V0, 25% glass fiber reinforced, chemically bonded, halogen free, high rigidity and thermal resistance, RoHS.

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

VYNOVA

VYNOVA™ S6030

VYNOVA™ S6030 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.

SACO AEI Polymers

ARMIDAN® NT7510

ARMIDAN® NT7510 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

ELIX Polymers, S.L.

Elix™ ABS 158I

High rubber content Acrylonitrile Butadiene Styrene modifier used to improve toughness of engineering thermoplastics & PVC. Typical applications: Provides superior impact strength performance at room & low temperature for blends containing Polycarbonate, Polyesters (PBT, PET) and copolymer SAN. Highly effective modifier for improving impact strength, elongation at break and process ability for opaque PVC compounds used for indoor profiles, semi-rigid sheets, decorative films, molded parts. Useful additive to improve mechanical properties of recycle ABS, SAN and ABS+PC.

Okamoto Glass Co. Ltd.

Okamoto Glass Co. Ltd. OG461

OG461 is a curing agent which find its applications in screenprinting where a good thermal resistance is required.

Momentive Performance Materials

Tufel™ III 92506

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

IGM Resins

Omnirad 184

Omnirad 184 is a highly efficient non-yellowing photoinitiator used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional vinyl monomers.

Nilit

Nilamid® A3 GF30 TF15

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Albemarle Corp

Ethacure® 100

Ethacure® 100 is an effective curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.

Kolon Industries

Kopel® KP3339UM

Kolon Industries Kopel® KP3339UM is a Thermoplastic Copolyester Elastomer (TPC-ET) product. It can be processed by extrusion or injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics includes flame rated and RoHS compliant.