Building Wires & Power Cables

VYNOVA

VynoKlear

VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.

AdvanSix

Aegis® H85WC01

Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.

HPL Additives

KINOX 24

KINOX 24 is a stabilizer for polyolefins, specially in copper cable applications, white to slightly yellowish crystalline powder/ granules.

3H Vinacom

3H Vinacom PVC Compound

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

Lion Elastomers

Royalene® 400

A Highly Extendable DCPD Polymer with Heavy Hydrotreated Paraffinic Oil for TPO/TPV and Thermoset Applications

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V150

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

3H Vinacom

3H Vinacom XLPE compound 3H VINACOM HA-5010

3H Vinacom XLPE compound 3H VINACOM HA-5010 is a silane cross-linkable polyethylene compound for low voltage electrical wire and cable insulation. Both the grafting and wire coating process are performed in one single step in the usual wire and cable production extruder for polyethylene and cross-linking takes place through a reaction involving water vapor after being extruded. Difficulty in maintaining dimensional accuracy during cross-linking is avoided because the temperature of cross-linking is below the crystalline melting point of the polymer. Therefore, 3H VINACOM XLPE HA-5010 allow cross-linked polyethylene wire and cable without the need for much capital in special equipment like peroxide or radiation cross-linking.

Huber Engineered Materials

MoldX® P18

MoldX® P18 is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

SACO AEI Polymers

PEXIDAN® HF X/T

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

Huber Engineered Materials

MoldX® S45

MoldX® S45 is engineered to allow higher loadings versus standard alumina trihydrate (ATH) products and offers excellent processing from 180 phr to as high as 240 phr.

Kumho Polychem

KEP® 2060

KEP® 2060 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

AdvanSix

Aegis® H55WCX

Aegis® H55WCX resin is a medium-viscosity, heat stabilized, nylon 6 universal wire jacket compound that provides excellent performance across a range of THHN, THWN and TFFN constructions. It offers well-balanced features including flexibility, toughness, abrasion resistance, and superior resistance to gasoline, oil and other hydrocarbons.

AdvanSix

Aegis® H55WC01

Aegis® H55WC01 is a medium viscosity, heat stabilized, nylon 6 universal wire jacket compound providing excellent performance across the range of THHN, THWN and TFFN constructions. It also offers a well-balanced set of properties including flexibility, toughness, abrasion resistance and excellent resistance to gasoline, oil and other hydrocarbons. Aegis® H55WC01 nylon compound has been investigated in accordance with the test methods outlined in ANSI/UL 1581 and ANSI/UL 83 and is certified under UL QMTT2 for use in wire, cable and flexible lighting products.

SACO AEI Polymers

PEXIDAN® X/T-UV

PEXIDAN® X/T-UV is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-005FR-UV1. Mixed and extruded in the proper proportions the two-component system results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® X/T-UV is halogenated but is RoHS-compliant. UL44 type insulation may be marked SUNRES or SR in all colors for sizes of 6 AWG and larger. UL4703 photovoltaic insulation may be marked SUNRES in all sizes and colors

Albemarle Corp

SAYTEX® BT-93W

SAYTEX® BT-93W flame retardant is a unique white-colored additive that combines stable, aromatic bromine with an imide structure.SAYTEX BT-93W flame retardant provides premium performance in a wide range of applications. It finds use in polyolefins, high-impact polystyrene (HIPS), thermoplastic polyesters (PBT, PET,etc.), polycarbonate and elastomers.

Natrochem

Plasticizer SC DLC-A

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Albemarle Corp

SAYTEX® 8010

SAYTEX® 8010 flame retardant is a non-diphenyl oxide based product containing a high level of aromatic bromine.SAYTEX 8010 flame retardant can be used in a wide range of high performance applications. In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers.

Europiren

Ecopiren 3,5

Ecopiren 3,5 is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

Pergan

PEROXAN HX-45 P

PEROXAN HX-45 P is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 45%, Powder with chalk.PEROXAN HX-45 P is used for the curing of unsaturated polyester resins.PEROXAN HX-45 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA)

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Pan Technology Inc.

PanTINT® 70W249

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Albemarle Corp

SAYTEX® 8010ZD

SAYTEX® 8010ZD flame retardant is an environmentally friendly pelletized version of SAYTEX 8010 flame retardant, a non-diphenyl oxide based product containing a high level of bromine. It is highly efficient and non-blooming, has good thermal and UV stability and also provides improved impact strength, melt-flow and elongation properties.

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V200

Vatan Plastik San. Tic. AS V200 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Pergan

PEROXAN DC-40 GS

PEROXAN DC-40 GS is Dicumyl peroxide 40%, Granules with chalk.PEROXAN DC-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

SACO AEI Polymers

PEXIDAN® V/T

PEXIDAN® V/T is a low density flame-retardant XLPE system curable by moisture and consists of a silanegrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-010FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T is halogenated but is RoHS-compliant.

Orion Engineered Carbons

Orion Engineered Carbons SPECIAL BLACK 100

SPECIAL BLACK 100 is an easily dispersed oxidized furnace process carbon black used for masstone in water-based primers. It is preferred as a tinting black with high stability to flooding and floating. Used for radiation curing coatings.

Mayzo, Inc.

BNX® DSTDP

BNX DSTDP (693-36-7)is a thioether-type antioxidant that functions by scavenging peroxides formed during the thermal oxidative degradation of plastics and other organic materials. Combinations of this product with hindered phenolic antioxidants (e.g. BNX 1010) provide outstanding thermal stability in polyolefins, styrenic polymers, and engineering plastics. BNX DSTDP is non-discoloring, has good compatibility with polyolefins, styrenic polymers, and adhesives, and has low odor relative to other sulfur-based antioxidants.

Natrochem

Sunpar 2280 DLC-A

Sunpar 2280 DLC-A is a paraffinic process oil silicon dioxide blend plasticizer for NR, IR, EPDM, and EPR. Excellent incorporation and easy handling.

Europiren

Ecopiren 3,5C

Ecopiren 3,5C is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

Pergan

PEROXAN DC

PEROXAN DC is Dicumyl peroxide 99%, Crystallin.PEROXAN DC is used for the (co)polymerization of styrene. It may also be used as co-agent in the production of flame retardant, expandable polystyrenePEROXAN DC is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Martin Marietta Magnesia Specialties

MagShield® UF

MagShield® UF magnesium hydroxide is achemically precipitated grade of magnesium hydroxide with a median particle size of 1.0 micron and produced from magnesium-rich brine and dolomitic lime. It is designed for critical, non-halogen flame retardant applications such as select wire and cable insulation and other thin section applications.

Pergan

PEROXAN DC-40 P

PEROXAN DC-40 P is Dicumyl peroxide 40%, Powder with chalk.PEROXAN DC-40 P is used for the curing of unsaturated polyester resins.PEROXAN DC-40 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Pergan

PEROXAN BIB-40 P

PEROXAN BIB-40 P is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Powder with chalk.PEROXAN BIB-40 P is used for the curing of unsaturated polyester resins.PEROXAN BIB-40 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

SIDIAC

SIVIC® 2870 LV

SIVIC® 2870 LV is acryonitrile based multipurpose grade polymer with low viscosity for industrial hose, cable and conveyor belt.

Spolana (Unipetrol Group)

Neralit® 682.0

Neralit® 682.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 682 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. It is especially suitable for the production of pressure pipes and window profiles. Extrusion technology on two-worm machines is suitable for processing the product.

Pan Technology Inc.

PanTINT® 70R127

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.