products in Other Processing & Packaging Applications

Applied Material Solutions

TRANS 4031

TRANS-4031 is a water-based non-Silicone antifoams typically incorporated in surfactants to boost efficacy and dispersibility within foaming water.

JS Cocoa

JS Natural Cocoa Powder - ZERO

ZERO is the natural fat reduced cocoa powder from Theobroma cocoa that brings a warm red brown color to your product.This highly defatted cocoa powder (less than 0.5% fat) is the solution for affordable cocoa content in the segments cookie and biscuits, confectionery and bakery products. Especially interesting in lauric fat based compound coatings & fillings to avoid fat blooming and fat incompatibility. ZERO brings intense coloring capabilities, unique solubility in (cold) liquids (making it suitable for foamy applications, dairy and non-dairy beverages), with lower calories and an attractive price.

JS Cocoa

JS Dark Alkalized Cocoa Powder - NERO

NERO is an alkalized fat reduced cocoa powder from Theobroma cocoa. Less than 0.5% fat. Fine cocoa powder with improved solubility and intense color darkening effect due to its low fat content. Perfect to add a hint of dark chocolate color to dry and wet applications. Specially those with fat compatibility issues. Ideal for chocolate spreads, cremes, foamy applications and dairy and non dairy beverages. Optimal darkener of chocolate biscuits, cakes, muffins and Oreo type of products. Due to JS COCOA unique Dutch processing applied at zero fat level, NERO has an enhanced taste without soapy off-flavors when compared to black powders with 10-12 % fat content.

Shamrock Technologies Inc.

NanoFLON® 101T

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact.

Rainmaker Polymers

Rainmaker Polymers RRPSMF14NA0

Rainmaker Polymers RRPSMF14NA0 is a general purpose crystal.

Applied Material Solutions

TRANS 5A

TRANS-5A is a food-grade in water-based variety with viscosities from ready to use to super-concentrated.

Applied Material Solutions

TRANS 20A

TRANS-20A is a food-grade in water-based variety with viscosities from ready to use to super-concentrated.

Hapco Inc.

STERalloy™ FDG 2781-5

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Hapco Inc.

STERalloy™ FDG 2791

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Hapco Inc.

STERalloy™ FDG 2036

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

ElastaPro

ElastaPro ESS30FDA

Our FDA Grade ElastaPro ESS30FDA silicone sheeting is designed for food contact applications. It is easily die cut and provides a superior gasket and sealing solution. It is available from 25-85 durometer. Thicknesses from .010” to .500” thick. Widths up to 60” wide. Many colors are available but the most popular color in stock is white. Choose from our large inventory of stock items. If we do not have it in stock, we will custom make it.

Precision Polymer Engineering

Precision Polymer™ V70H

V70H is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption.Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V70H has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.V70H also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1.Key Attributes Low compression set provides long-term sealing performance. Excellent resistance to oils FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Sanitary Standards Class 1 compliant Free from Animal Derived Ingredients Typical Applications Pharmaceutical and bio-analytical equipment Food and dairy processing equipment Brewing equipment

Samyang Corporation

TRIREX® 3025IR(03)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR(03) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR(03) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Detco Marine

Detco Marine FG Chain Lube

Detco Marine FG Chain Lube combines synthetic lubricants and mineral oil into a formula that penetrates, lubricates, and protects roller drive and conveyer chains.

ElastaPro

ElastaPro ESS60FDA TRANS

ElastaPro ESS60FDA Trans is designed for high food contact and dairy applications. It is easily die cut and provides a superior gasket and sealing solution. It is available from 20-70 durometer. Thicknesses from 0.010” to 0.500” thick. Widths up to 60” wide. Choose from our large inventory of stock items. If we do not have it in stock, we will custom make it.

Precision Polymer Engineering

Precision Polymer™ V70Q

Black, Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. ASTM designation = FKM. ISO designation = FPM. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) in accordance with Code of Federal Regulations Title 21 (CFR21) Part 177.2600.WRC approved for cold water applications. WRC Reference No: 0907521FDA grade, formulated for use as product contact surfaces in dairy equipment.

Momar

FlexSafe™ ISO 100

FlexSafe™ ISO 100 are designed for a wide variety of applications:  hydraulics, compressors, vacuum pumps, blowers, turbines, light duty gear boxes, slideways, cables, conveyors, chains, air tools, and other applications in food and industrial plants.

Detco Marine

Detco Marine FG Silicone Spray

Detco Marine FG Silicone Spray is designed to lubricate equipment used in the packaging and processing industry. FG Silicone Spray leaves a non-staining dry pure silicone film to lubricate moving parts, reducing friction and wear. FG Silicone Spray is heat stable from -35°F to 350°F. FG Silicone Spray is also formulated as a release agent on seals and gaskets of tank closures.

Reagens USA Inc.

REAGENS CL/4 E

Reagens CL/4 E is used in extrusion and injection molding of plasticized PVC. It imparts excellent initial color, good transparency and a good long term heat stability with most types of PVC resins. It may be also used in plastisol processing (rotational molding). The addition of an epoxy compound, such as Reaflex EP/6 (about 2-5 phr), markedly improves the long term heat stability.

Matrix Polymers

Revolve M-716

Revolve M-716 is a rotational molding polyethylene general purpose grade designed to provide conductivity and still maintain a wide processing window, excellent mouldability and good impact strength. This grade is suitable for food contact applications.

Nanjing Shuguang Chemical Group

Nanjing Shuguang Chemical Group Accelerant SG-R 704

Nanjing Shuguang Chemical Group Accelerant SG-R 704 is used as the super accelerator for natural rubber, synthetic rubber and latex. It can replace ZDBC, ZDEC, PZ due to its lower vulcanization temperature in application. And the processing has better safety. The prominent advantage is that it does not produce the carcinogenic nitroamine in the rubber processing. It can also be a good activator for thiazole accelerator. When this product is added in, the dosage of zinc oxide and sulfur is ordinary, the fatty acid may be needed or not. SG-R 704 may be added to the rubber material directly, or added into latex with dispersing medium. Please refer to the regulation in the related chapters in FDA, BgVV when it is applied to the rubber product which food contact.

Hapco Inc.

STERalloy™ FDG 2766

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Detco Marine

Detco Marine FG Pen Lube

Detco Marine FG Pen Lube is designed for use as a penetrating oil for applications requiring a product that meets NSF H1 requirements. FG Pen Lube is used to loosen and free hard to remove nuts, bolts, screws, etc. FG Pen Lube is also an excellent rust inhibitor. FG Pen Lube meets the requirements for incidental food contact and is safe for all metal surfaces and most plastics.

ElastaPro

ElastaPro ESS70FDA

Our FDA Grade ElastaPro ESS70FDA silicone sheeting is designed for food contact applications. It is easily die cut and provides a superior gasket and sealing solution. It is available from 25-85 durometer. Thicknesses from .010” to .500” thick. Widths up to 60” wide. Many colors are available but the most popular color in stock is white. Choose from our large inventory of stock items. If we do not have it in stock, we will custom make it.

Momentive Performance Materials

Addisil™ IND 2060 E

TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Saint-Gobain

Rulon® 641

Rulon® 641 is manufactured from FDA compliant materials which possess excellent load and wear characteristics.It offers excellent, continuous non-lubricated service up to 10,000 PV - higher for intermittent service. While the load capacity of Rulon 641 is generally limited to 1,000 psi at room temperature, deformation is a function of wall thickness, temperature and load.Its compatibility with a wide array of mating surfaces, including mild steel, 303 and 316 stainless steels, as well as harder materials, make it a good choice for most food and pharmaceutical bearing applications.

Detco Marine

Detco Marine FG Grease

Detco Marine FG Grease is a high-purity food-grade grease that provides long-lasting grease protection. FG Grease withstands heat to 550°F. Temperatures above 400°F may require periodic reapplication.

Advanced Enzyme Technologies

Advanced Enzyme Technologies Fungal Proteases

Advanced Enzyme Technologies Fungal Proteases offers bespoke blends for better lactose tolerance, gluten tolerance, and digestion. It also contains a variety of nutritious blends and combinations.

Hapco Inc.

STERalloy™ FDG 2398

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Hybrid Plastics

POSS® MS0825 - Nanoreinforced Polypropylene

POSS® MS0825 - Nanoreinforced Polypropylene utilizes POSS technology to achieve increased hydrophobicity, lower coefficient of friction and improved processability through structural control at the nanometer level.

Lati Industria Thermoplastici S.p.A

Latigloss™ 57 G/50 F2

Lati Industria Thermoplastici S.p.A Latigloss™ 57 G/50 F2 is a Product with high mechanical properties and exceptional surface finish based on Semi-aromatic polyammide (PPA) reinforced with . It is processed by using injection molding.

Detco Marine

Detco Marine FG Equipment Lube

Detco Marine FG Equipment Lube is a lubricant made up of USP liquid petrolatum and propellant, providing a sanitary means of lubricating dairy and food processing equipment. FG Equipment Lube resists water washout and has an operating range of 0°F to 300°F.

Momentive Performance Materials

Addisil™ IND 1070 E

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Hapco Inc.

STERalloy™ FDG 2781

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Advanced Enzyme Technologies

Advanced Enzyme Technologies Papain

Advanced Enzyme Technologies Papain offers bespoke blends for better lactose tolerance, gluten tolerance, and digestion. It also contains a variety of nutritious blends and combinations.

Abbott Rubber Company

Abbott Rubber Company 3/8 OD X .062 WALL POLYPROPYLENE TUBING

Abbott Rubber Company 3/8 OD X .062 WALL POLYPROPYLENE TUBING