Disposable Nonwovens

Teijin Limited

Panlite® L-1250Y

Teijin Limited Panlite® L-1250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® L-1250Y are: Flame Rated Good Mold Release Medium Viscosity

Kuraray

Kuraray Poval™ 15-99

KURARAY POVAL™ 15-99 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It exhibits varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 15-99 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Esenttia

ESENTTIA® 25H35-SB

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Teijin Limited

Panlite® L-1225ZL 100

Weather Resistant grade

Esenttia

ESENTTIA® 35H35

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Braskem North America

Braskem North America CP250H

Narrow MWD, low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Petkim

Petkim PETOPLEN EH341

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Teijin Limited

Panlite® L-1225Z 100

Weather Resistant grade

Petkim

Petkim PETOPLEN EH251

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Kuraray

Kuraray Poval™ 20-98

KURARAY POVAL™ 20-98 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 20-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Teijin Limited

Panlite® L-1225L

Teijin Limited Panlite® L-1225L is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225L are: Flame Rated Good Mold Release Low Viscosity Typical application of Panlite® L-1225L: Automotive

Molgroup Chemicals

TATREN HT 25 11

TATREN HT 25 11 is a controlled rheology homopolymer of very narrow molecular weight distribution. Consistent processability, good color and thermal stability, very low volatiles and low smoke make this grade suitable to be used for very demanding fiber applications. This grade contains anti gas fading additive package.

Elastron

SEBS - ELASTRON P.G400.A65.N

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

Esenttia

ESENTTIA® 40H92-SBC

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

Teijin Limited

Panlite® L-1225Y

Teijin Limited Panlite® L-1225Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225Y are: Flame Rated Good Mold Release Low Viscosity Typical application of Panlite® L-1225Y: Automotive

BTC Europe GmbH

Emuldur® 360 A

BTC Europe GmbH

Emuldur® 2404

SABIC's Specialties Business

CYCOLOY™ FR Resin CX2244ME

SABIC's Specialties Business CYCOLOY™ FR Resin CX2244ME is a polycarbonate/acrylonitrile butadiene styrene (PC/ABS) blend that is injection moldable, high flow, and non-chlorinated/brominated flame retardant grade. It has a UL94 V0 at 0.75 mm and a 5VB at 1.5 mm flame rating. This grade offers improved chemical resistance compared to standard PC/ABS blends and is a good choice for thin-wall applications and hospital/medical equipment.

SABIC's Specialties Business

LEXAN™ Copolymer EXL9134

SABIC's Specialties Business LEXAN EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40 deg C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL9134 resin is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business

CYCOLOY™ FR Resin CX7211

SABIC's Specialties Business CYCOLOY CX7211 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated flame retardant grade. It has a UL94 V0@1.5mm, 5VA@2.5mm and 5VB@2.0mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

SABIC's Specialties Business

LEXAN™ Copolymer EXL1613T

SABIC's Specialties Business LEXAN™ EXL1613T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN™ EXL1613T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LNP™ ELCRES™ XD2322

SABIC's Specialties Business ELCRES XD2322 polycarbonate (PC) copolymer resin is a UV stabilized opaque grade. This resin offers UL94 V0@1.5mm flame retardancy based on non-bromine, non-chlorine FR system, excellent low temperature ductility characteristics and processability. ELCRES XD2322 resin is an excellent candidate for a wide range of applications such as electronic vehicles (EV) and 5G devices.

SABIC's Specialties Business

ULTEM™ Resin HU1000E

SABIC's Specialties Business ULTEM HU1000E resin is an unreinforced amorphous polyetherimide (PEI) resin that may a high glass transition temperature (Tg) of 217°C. The material contains an internal mold release. The intended use for this material is in medical devices and pharmaceutical applications. The material is biocompatible (ISO 10993 or USP Class VI) and Healthcare management of change applies. The material may offer Steam-, Hydrogen Peroxide-, Gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It may offer global food compliance (FDA, CN, EC). Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings. The material is RoHS compliant. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin HU2110

SABIC's Specialties Business 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). UL94 V0 and 5VA listing. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer XHT2143

SABIC's Specialties Business XHT2143 is a high flow, UV stabilized, high heat polycarbonate copolymer with an HDT/Af of 142 C. It is available in a range of opaque and limited transparent colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer EXL1414T

SABIC's Specialties Business LEXAN™ EXL1414T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature (-40 °C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN™ EXL1414T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer 4701R

SABIC's Specialties Business High heat resistant polyphthalate carbonate, provides DTUL of 300F at 264 psi. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin HU1110

SABIC's Specialties Business Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer HPH4504H

SABIC's Specialties Business LEXAN™ HPH4504H resin is based on high heat Polycarbonate (PC) siloxane copolymer with enhanced autoclavability for medical devices and pharmaceutical applications. Added features of this grade include: Biocompatible (ISO10993 or USP Class VI). EtO, Steam, Gamma and e-Beam Sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer EXL9112

Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temp. ductility. Non-chlorinated, non-brominated flame retardant product. UL rated V-0/5VA.

SABIC's Specialties Business

CYCOLOY™ FR Resin CX7240U

SABIC's Specialties Business CYCOLOY CX7240U Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated UV stabilized flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

SABIC's Specialties Business

LEXAN™ VISUALFX™ Resin FXE9330

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business

LEXAN™ Copolymer HPX4EU

SABIC's Specialties Business Medium flow specialty polycarbonate - improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

LEXAN™ Copolymer HPH4504

SABIC's Specialties Business High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 of USP Class VI). EtO, steam, gamma and e-beam sterilizable.

SABIC's Specialties Business

ULTEM™ Resin HU2210

SABIC's Specialties Business 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin HU1000

SABIC's Specialties Business ULTEM HU1000 resin is an unreinforced amorphous polyetherimide (PEI) resin that may a high glass transition temperature (Tg) of 217°C. The intended use for this material is in medical devices and pharmaceutical applications. The material is biocompatible (ISO 10993 or USP Class VI) and Healthcare management of change applies. The material may offer Steam-, Hydrogen Peroxide-, Gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It may offer global food compliance (FDA, CN, EC). Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings. The material is RoHS compliant. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.