products in Medical: Medical Devices

Polyplastics Group

Topas® 8007S-04

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Polyplastics Group

Topas® 8007X-10

Polyplastics Group Topas® 8007X-10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries.

3H Vinacom

3H Vinacom PVC Compound

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

Boltaron Inc - A SIMONA Company

Boltaron® 4550

Boltaron® 4550 is a uv resistant far-rated sheet.

Carbon Inc.

CarbonResin™ MPU 100

CarbonResin™ MPU 100 ofers a unique combination of mechanical strength, biocompatibility, and sterilizability. MPU 100 is Carbon’s first medical-grade material, designed to help medical product manufacturers accelerate product development cycles and improve the quality of their products. Similar to Carbon’s rigid polyurethane materials, MPU 100 is a two component material that produces isotropic parts with fine features.

VYNOVA

VYNOVA™ S6502

VYNOVA™ S6502 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering of both rigid and flexible PVC articles: profiles, sheets & films, compounds, and flooring.

Fainplast Compounds

Hax™ HF 239/3

Elastocon TPE Technologies

Elastocon® 2880L

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.

DAK Americas

Array™ 9921M

Array™ 9921M is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for stretch blow molding.Important attributes of Array™ 9921M are: Clarity Copolymer Eco-Friendly/Green Food Contact Acceptable Good Processability Typical applications include: Medical/Healthcare Engineering/Industrial Parts Food Contact Applications

Momentive Performance Materials

Tufel™ III 92506

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Momentive Performance Materials

LIM™ 6050-D2

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Elastocon TPE Technologies

Elastocon® STK40

Momentive Performance Materials

Silopren™ LSR 2670

Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.

Elastocon TPE Technologies

Elastocon® STK56PA

Elastocon® STK56PA a colorable thermoplastic elastomer that has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA can be overmolded to polyamide/nylon.Elastocon® STK56PA is supplied as ready to use pellets in 50 lb. bag quantities.

LOTTE Advanced Materials

Starex MR-0130

Momentive Performance Materials

Silopren™ LSR 4040

Silopren™ LSR 4040 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4040 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

Fainplast Compounds

Hax™ HF 241

Momentive Performance Materials

Silopren™ LSR 2640

Silopren™ LSR 2640 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2040, Silopren™ LSR 2640 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2640 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2640 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Cable connectors Parts of medical technical equipment.

Saint-Gobain

Exac™ ECTFE

Exac ECTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Polyplastics Group

Topas® 5013L-10

Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer

Polyplastics Group

Topas® 5013F-04

Polyplastics Group Topas® 5013F-04 is a high temperature film extrusion grade for blends. It is a high clarity amorphous resin with high flow, high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast blends, and in coextruded blends in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as heat resistant blister, hot fill, and easy tear packaging. If performance at elevated temperatures is not required, we also offer lower glass transition temperature (Tg) grades of TOPAS.

3D Systems

VisiJet® M3 Hi-Cast

VisiJet Hi-Cast Material provides extreme resolution performance for high-end lost-wax casting of fine-detail items such as jewelry and micro-medical and electrical devices. Used exclusively in the ProJet CPX 3500 3D printers, the Hi-Cast material sets the standard for feature definition, accuracy and precision.

Elastocon TPE Technologies

Elastocon® 8068N

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

DOMO Chemicals

Thermec™ N 4314R35H

Greene Tweed

ORTHTEK® WF

Greene, Tweed offers precision-molded thermoplastic components made from our high-performance Orthtek® composite materials for a variety of demanding medical and biotechnology applications. Orthtek WF compnents work well as metal replacement, and dimensional stability. Orthtek WF is recommended applications such as nail guides and retractors where radiolucentcy and autoclaving are required.

Momentive Performance Materials

Silopren™ LSR 4020

Silopren™ LSR 4020 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4020 TP 3364 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4020 TP 3364 are distinguished by the following properties: excellent biocompatibility high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylene oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes. Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4020 TP 3364 is particularly suitable for the following elastomeric articles: sealing elements, catheters, vibration dampers, tube connectors, parts for medical technical equipment, mats.

ELIX Polymers, S.L.

Elix™ ABS M203FC

Injection Molding grade for medical applications (e.g. Inhalers, roller clamps, spikes, etc.). Biocompatible with up to 30 days human contact duration according to USP Class VI and ISO 10993-1. Food contact acc. To BfR and FDA, DMF registered. Easy flowing, high gloss, standard impact strength.

Samyang Corporation

TRIREX® 3025FD

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.Agency Ratings : USP Class VITRIREX 3025FD is a polycarbonate resin grade which has high impact strength in combination with superior mechanical and physical property.APPLICATIONS TRIREX 3025FD resin grade is used for Medical devices, food contact materials and etc. Medium viscosity. Transparent colors only.

Greene Tweed

Chemraz™ SD585

Chemraz SD585 is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz SD585 include engineering/industrial parts, food contact applications, medical/healthcare and sealing applications. Primary characteristic: chemical resistant.

Momentive Performance Materials

Silopren™ LSR 2680 FC

Polyplastics Group

Topas® 8007F-04

Polyplastics Group Topas® 8007F-04Product DescriptionTOPAS 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast applications, and in coextrusions in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as blister, twist, barrier, shrink and easy tear packaging. Industrial uses include formed decorative sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Pharmaceutical blisters Deep draw barrier trays Shrink films and labels Twist films Decorative sheet Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Excellent deep forming, unlike other barriers High shrink, low stress, gloss, clarity, toughness High gloss, outstanding deadfold, clean cutting Gloss, hardness, chemical resistance, forming Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-600 - robust clarity extrusion grade especially for PE blends Topas® 8007F-04Topas® 8007F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Momentive Performance Materials

Silopren™ LSR 4070

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Momentive Performance Materials

LIM™ 6040-D2

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Boltaron Inc - A SIMONA Company

Boltaron® 4335

Boltaron® 4335 is a impact resistant sheet.

Momentive Performance Materials

Silopren™ LSR 4060

Silopren™ LSR 4060 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4060 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4060 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4060is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, bellows, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Polyplastics Group

Topas® 5013S-04

Polyplastics Group Topas® 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.