products in Laboratory & Diagnostics

Polyplastics Group

Topas® 8007S-04

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Niacet

Niacet Potassium Acetate 70% Solution

Potassium Acetate is available as a white non-dusty, free-flowing agglomerate which offers the benefit of improved wettability, higher reactivity and higher bulk density. Potassium Acetate is also available as a clear colorless 52% and 70% solution in water.

Pinnacle Polymers

Pinnacle™ PP 1635AF

35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635AF is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding; the flow properties should be of particular benefit in the production of thin-walled articles. It contains no nucleators, antistats or animal derivatives.Potential applications include: healthcare/medical packaging, labware, containers and thin-wall articles in general.The 1635AF highlights: Heat Sterilizable (autoclavable) Contains no animal derivatives Excellent color and processing stability Low Extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

United-Guardian, Inc.

Lubrajel® RR

Lubrajel RR is clear and colorless, and virtually odorless and remains so after sterilization by gamma radiation. An initial apparent viscosity of about 25,000 cps (Brookfield RVT or equivalent, spindle #7, 50 rpm, 22º C) exhibits practically no change upon irradiation. Temperature stressed stability studies indicate that pH, viscosity, color, clarity and lubricating qualities are not sacrificed.

Polyplastics Group

Topas® 5013L-10

Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer

Niacet

Niacet Potassium Acetate 52% Solution

Potassium Acetate is available as a white non-dusty, free-flowing agglomerate which offers the benefit of improved wettability, higher reactivity and higher bulk density. Potassium Acetate is also available as a clear colorless 52% and 70% solution in water.

Niacet

Niacet Potassium Acetate Agglomerate Technical

Potassium Acetate is available as a white non-dusty, free-flowing agglomerate which offers the benefit of improved wettability, higher reactivity and higher bulk density. Potassium Acetate is also available as a clear colorless 52% and 70% solution in water.

Niacet

Niacet Sodium Acetate Agglomerate Pharma

Sodium Acetate is available as an agglomerate and a powder (anhydrous) as well as a crystal (trihydrate). Sodium Acetate trihydrate is very soluble in water. Sodium Acetate anhydrous agglomerate offers the properties of non- dustiness, improved wettability, higher reactivity, higher bulk density and improved free-flowability.

Boltaron Inc - A SIMONA Company

Boltaron® 4335

Boltaron® 4335 is a impact resistant sheet.

Polyplastics Group

Topas® 5013S-04

Polyplastics Group Topas® 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.

United-Guardian, Inc.

Lubrajel® MGL

Lubrajel MGL is a medical lubricant with a lower viscosity than our standard medical lubricant, Lubrajel MG. It can be used as a general and instrument lubricant for use during physical exams. It can be applied to catheters, thermometers and other instruments to ensure ease of use and patient comfort.

Niacet

Niacet Potassium Acetate Agglomerate Very Pure

Potassium Acetate is available as a white non-dusty, free-flowing agglomerate which offers the benefit of improved wettability, higher reactivity and higher bulk density. Potassium Acetate is also available as a clear colorless 52% and 70% solution in water.

Supreme Petrochem

Supreme Petrochem SC206

Supreme Petrochem SC206 has Good Flow Excellent Clarity & Shine sample collectors, Test Tubes, Good Strength & Excellent Processability.

Fluorseals

fluteck™ P1000

fluteck™ P1000 PTFE Standard Grade is Virgin PTFE for Ram Extrusion, Compression and Isostatic molding.

Fluorseals

fluteck™ P2000

fluteck™ P2000 PTFE Premium Grade-USP Class VI is a high tech Virgin PTFE for Ram Extrusion, Compression and Isostatic molding, classified as medical grade according to the standard USP VI (50° C -122° F and 121° C – 250° F) and ISO 10993-1:2009.

Polyplastics Group

Topas® 6017S-04

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Fluorseals

fluteck™ C100

fluteck™ C100 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene

Cospheric LLC

Cospheric LLC Fluorescent Red Polyethylene Microspheres 1.050g/cc - 45um to 500um (0.5mm)

Cospheric Fluorescent Red Polyethylene Microspheres 1.050g/cc - 45um to 500um (0.5mm) are bright fluorescent red microspheres supplied in dry powder form. Fluorescent particles of known density and particle diameter range are often used in density-matching for flow visualization and analysis of fluid flow in a device. Particles exhibit a strong fluorescent response and are color stable in solution. Polyethylene microspheres are hydrophobic and suspend easily in oil-based solutions. They can also be suspended in aqueous solution if coated with a surfactant prior to suspending in water. We recommend using Tween 80 or Tween 20 Surfactants.

Mitsubishi Chemical Group Corporation

Ertalon® LFX PA6

Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.

Mitsubishi Chemical Group Corporation

Nylatron® LFX PA6

Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment

Mitsubishi Chemical Group Corporation

Ertacetal® H POM-H

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Mitsubishi Chemical Group Corporation

Acetron® H POM-H

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

SABIC's Specialties Business

ULTEM™ Resin 1010UCL

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound DFP34

LNP LUBRICOMP DFP34 compound is based on Polycarbonate (PC) resin containing 20% glass fiber, 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business

ULTEM™ Resin 2120

SABIC's Specialties Business ULTEM™ Resin 2120 is a high-flow, 10% glass fiber-reinforced polyetherimide resin. This material is RoHS compliant, intrinsically flame retardant without the use of FR modifiers, and offers UL94 V0 at over 0.5 mm. It offers excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This material is opaque and can be custom colored. SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which are available through differentiated color nomenclature.

SABIC's Specialties Business

NORYL™ Resin N190X

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

SABIC's Specialties Business

LNP™ STAT-LOY™ Compound NX03583

SABIC's Specialties Business LNP™ STAT-LOY™ NX03583 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing proprietary fillers. Added features of this grade include: Permanently Anti-Static, Flame Retardant.

SABIC's Specialties Business

VALOX™ FR Resin ENH4550

SABIC's Specialties Business VALOX™ FR Resin ENH4550 is a 25% glass-reinforced, non-chlorinated/brominated, flame-retardant polybutylene terephthalate (PBT) injection-moldable grade with excellent chemical resistance. It has a UL94V0 at 0.30mm and 5VA at 2.0mm flame rating, making it a good candidate for a variety of applications needing a sustainable FR PBT solution.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound DFL32P

SABIC's Specialties Business LNP LUBRICOMP DFL32P compound is based on Polycarbonate (PC) resin containing 10% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Exceptional Processing.

SABIC's Specialties Business

ULTEM™ Resin AUT200G6

30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

SABIC's Specialties Business

LEXAN™ Copolymer Resin LUX7636C

SABIC's Specialties Business LEXAN LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN LUX7636C is available in diffusion colors.

SABIC's Specialties Business

LEXAN™ Copolymer HPH4504

SABIC's Specialties Business High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 of USP Class VI). EtO, steam, gamma and e-beam sterilizable.

SABIC's Specialties Business

LEXAN™ Copolymer EXL9112

Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temp. ductility. Non-chlorinated, non-brominated flame retardant product. UL rated V-0/5VA.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound KL004A

LNP LUBRICOMP KL004A compound is based on Acetal (POM) Homopolymer resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound FL003

LNP LUBRICOMP FL003 compound is based on Polyethylene (PE) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business

LNP™ THERMOCOMP™ Compound AF003

LNP THERMOCOMP AF003 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 15% glass fiber.