products in Medical

Synpol

Synpol AT 70 Acrylic Resin

Synpol AT 70 Acrylic Resin is a thermosetting carboxyl functional acrylic co-polymer solution for baked coating along with epoxy resins.

Momentive Performance Materials

LIM™ 6010

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

Nylene

Nylene® 2407 HSSP

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97/TY-40

Antitack NP-97/TY-40 is a highly concentrated dispersion of zinc stearates. By means of new tech-nologies and high quality raw materials the zinc stearate content could be increased to more than 40 %.

Toray

Toray Cetex® TC1200

Toray Toray Cetex® TC1200 is a high-end thermoplastic composite material, utilizing the semi-crystalline thermoplastic polymer PEEK for excellent mechanical performance. The long-standing use of PEEK in demanding Applicationss such as aerospace and cutting edge medical Applicationss proves its benefits and versatility. As a composite material it offers outstanding mechanical performance, also at elevated temperatures. The semi-crystalline nature of the resin ensures an excellent resistance to chemicals and solvents, and an equally superior performance in flammability properties. Toray Cetex® TC1200 is available in UD tape, fabric prepreg, and RTL formats (reinforced thermoplastic laminate). RTLs can be equipped with lightning strike protection, and carbon reinforced RTLs can be supplied with a thin glass top layer to protect a partly metallic assembly against galvanic corrosion. Glass scrim is also applicable in structures made from UD tape. PEEK (PolyEtherEtherKetone) Thermoplastic Resin System.

Dynasol Elastomers

Paracril™ 33110

Paracril 33110 is a copolymer of butadiene and acrylonitrile, cold polymerized and non-staining stabilized.

Samyang Corporation

TRIREX® 3025FD

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.Agency Ratings : USP Class VITRIREX 3025FD is a polycarbonate resin grade which has high impact strength in combination with superior mechanical and physical property.APPLICATIONS TRIREX 3025FD resin grade is used for Medical devices, food contact materials and etc. Medium viscosity. Transparent colors only.

BARLOG plastics GmbH

Kebablend® / M 48/90 PPS

PPS functional compound for the production of plastic-bonded magnets

3D Systems

Accura® Xtreme White 200

Features Exceptionally tough and durable Resists breakage and handles challenging functional assemblies Great for snap fits, assemblies and demanding applications Ideal for master patterns for vacuum casting

Saint-Gobain

Norprene™ A60F

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Saint-Gobain

Fluran™ F-5500-A

Fluran F-5500-A is a Fluoroelastomer product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Corrosion Resistant UV Resistant Weather Resistant

NuSil Technology

NuSil™ MED-4735

NuSil™ MED-4735 is a high consistency silicone elastomer.

Nylene

Nylene® 2403 HSSP BK

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Greene Tweed

Chemraz™ SD585

Chemraz SD585 is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz SD585 include engineering/industrial parts, food contact applications, medical/healthcare and sealing applications. Primary characteristic: chemical resistant.

NuSil Technology

NuSil™ MED-1000

NuSil™ NuSil™ MED-1000 is a RTV silicone adhesive.

3D Systems

Accura® ClearVue

Applications General purpose prototyping Models requiring high clarity Headlamps and lenses Fluid flow and visualization models Transparent assemblies Snapfits and complex assemblies Medical models and medical devices Benefits The highest clarity and transparency Durable and strong Humidity and moisture stable USP Class VI capable

Saint-Gobain

Norprene™ A70G

Norprene A70G is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A70G include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Quantum Composites

Lytex® 4149

Lytex® 4149 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

NuSil Technology

NuSil™ MED10-6600

NuSil™ MED10-6600 is a addition cure silicone dispersion.

BARLOG plastics GmbH

Kebablend® / M 40/71 PPS

PPS functional compound for the production of plastic-bonded magnets

Nylene

Nylene® PX1719HS

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

DRT

Endere S

Endere S resin is a highly hydrogenated allergen-tested resin, particularly suited for use in skin-contact products.

NuSil Technology

NuSil™ MED-4070

NuSil™ MED-4070 is a uhp high consistency silicone elastomer.

Nylene

Nylene® NX4797

Nylene Designed for use in extrusion of Tubing and Film Excellent grease resistance, toughness, and resistance to abrasion Films made from NX4797, have good barrier properties against Oxygen and Aroma typical of PA6 Meets FDA 21 CFR 177.1500 food contact requirements

Kraton

Kraton™ D0246 E

Kraton D0246 E is a high vinyl, high diblock SBS polymer with bound styrene of 26% mass. The polymer contains uncoupled, dicoupled, and multi-coupled components. The major component is the uncoupled species. Kraton D0246 ET - supplied as a porous pellet dusted with talc Kraton D0246 E is used as a modifier of bitumen.

NuSil Technology

NuSil™ MED-1131

NuSil™ NuSil™ MED-1131 is a RTV silicone adhesive.

3B Fibreglass

3B Fibreglass MF 01 ER

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Kraton

Kraton™ DX1000 A

Kraton DX1000 A is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied from Europe in the physical form(s) identified below. Kraton DX1000 AU - supplied as an undusted porous pellet Kraton DX1000 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

NuSil Technology

NuSil™ MED-6033

NuSil™ MED-6033 is a clear low viscosity silicone elastomer.

NuSil Technology

NuSil™ MED1-4855

NuSil™ MED1-4855 is a liquid silicone rubber.

Kraton

Kraton™ D1184 A

Kraton D1184 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: Kraton D1184 AS - supplied as porous pellets dusted with amorphous silica Kraton D1184 AT - supplied as porous pellets dusted with talc Kraton D1184 ASM - supplied as powder dusted with amorphous silica Kraton D1184 AIM - supplied as powder dusted with calcium carbonate for supply to the North American market Kraton D1184 A polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

Kuraray

Kuraray Poval™ 20-98

KURARAY POVAL™ 20-98 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 20-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

NuSil Technology

NuSil™ MED1-6604

NuSil™ MED1-6604 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, SMOOTH FINISH IN THF.

Dynasol Elastomers

Paracril™ 3380

Paracril 3380 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Kettlitz-Chemie

Kettlitz Chemie Kezadol PCI

Kezadol PCI is a surface treated calcium oxide powder for use as an effective desiccant. The calcium ox-ide is coated by a chemically indifferent hydrocarbon. Due to this preparation Kezadol PCI has a reduced air pollution. Additionally there will not be any unintended reaction with humidity.

EnvisionTEC

EnvisionTEC E-GUARD

EnvisionTEC E-Guard is a biocompatible, crystal clear material for the production of accurate splints and retainers. The results produced by combining E-Gard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards.