products in Healthcare & Pharma

Roquette

NEOSORB® XTAB 300S Sorbitol - Pharma

Tooth-friendly NEOSORB® XTAB 300S is a directly compressible sorbitol powder for very hard sugar-free tablets with high flavor load. Benefits Delivers a smooth, hard and uniform colored surface. Provides a clean, cooling effect. Does not produce acids or cause dental plaque or tooth decay. Nutritional benefits (maintenance of tooth mineralization, tooth-friendly generic EU claims) recognized by European regulations.

Kraton

Kraton™ D1193 P

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Jungbunzlauer Suisse AG

CITROFOL® AI

Jungbunzlauer CITROFOL® AI has been registered according to REACH Regulation at the European Chemicals Agency (ECHA) in 2013.CITROFOL® AI consists 100 % out of natural materials, citric acid and ethanol, and is used as flavor and carrier for flavors in the food industry. It is also permitted as a processing aid to whip egg whites. In the personal care industry CITROFOL® AI is used as solvent, diluent and fixative by perfumers. It is well accepted as an active ingredient in deodorants; it inhibits the enzymatic decomposition of sweat components. CITROFOL® AI is a cosmetic raw material approved by ECOCERT GREENLIFE, conform to COSMOS Standard. In pharmaceutical applications CITROFOL® AI contributes as plasticiser to the performance of enteric-coated tablets.

Kraton

Kraton™ MD1653 M

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

AdvanSix

AdvanSix Acetone Low Water Grade

AdvanSix High Purity Acetone not only has minimum impurities, but also contains low benzene, and low water. It is produced to the highest standard for key industry segments.Grades of AdvanSix Acetone are commercially available, meeting high purity NF and ACS certification requirements to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications.High Purity Acetone is used in Building and Construction applications as an intermediate in the production of construction adhesives; DIY and Consumer applications as repair adhesives; As a building envelope material intermediate in the production of architectural coatings, Exterior insulation and finishing systems, and glazing and window elements; Decorative paints and coatings, pipes and plumbing cement systems; Construction chemical uses in adhesives; Acetone is used as an intermediate in the flooring and surface segment as floor coatings; Infrastructure coatings and markings; Roofing sealants and caulks. High Purity Acetone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural pest control, and industrial weed and vegetation control. High Purity Acetone is used in the Automotive and Transportation market as an intermediate in the production of aftermarket parts, exterior and body parts, interior parts and lighting; as a coating for aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings.High Purity Acetone is used in Electrical & Electronic markets as an intermediate in the production of devices and assemblies for automotive and consumer electronics, Packaging and assembly adhesives and sealants; Printed Circuit Boards and other semiconductor manufacturing applications. High Purity Acetone is used in the Healthcare & Pharma markets as an oral and dental drug delivery solution and as an intermediate in tubing and fluid handling. NF Acetone is extensively used in API pharmaceutical manufacturing, as an excipient and coating, and processing aid. High Purity Acetone is used in Home and Personal Care markets in nail care applications.High Purity Acetone is used in the Paints & Coatings market in the automotive and transportation segment as an intermediate in aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings; High purity Acetone is used in architectural, decorative, flooring, infrastructure, roads, and paving, wood coatings and finishes applications. Industrial coating applications include agricultural and construction, appliances and consumer goods, coil coatings, container coatings, furniture coatings, and metal coatings. Packaging coating applications include film and foil, overprint varnishes, primers and lacquers and other aerosol coating applications.

Niacet

Niacet Sodium Acetate Trihydrate Crystal Pharma

Sodium Acetate pharmaceutical grade is used in the preparation of haemodialysis and peritoneal dialysis solutions, in the production of insulin and in infusion liquids.

Niacet

Niacet Potassium Acetate 70% Solution

Potassium Acetate is available as a white non-dusty, free-flowing agglomerate which offers the benefit of improved wettability, higher reactivity and higher bulk density. Potassium Acetate is also available as a clear colorless 52% and 70% solution in water.

NuSil Technology

NuSil™ MED-4750

NuSil™ MED-4750 is a high consistency silicone elastomer.

Roquette

NEOSORB® P 300 C Sorbitol - Pharma

NEOSORB® Sorbitol pharma is used in pharmaceutical and nutraceutical formulations as a filler, filler/binder and bulk sweetener in various oral dosage applications, and as a plasticizing agent well-adapted to starches in coating/film forming applications. Applications Swallowable, orally dispersible, chewable and effervescent tablets Lozenges Blends Granules Pellets premix Medicated confectionery Features Excellent tableting properties Great organoleptic, non-cariogenic and sugar-free properties Suitable for use in formulations addressing pediatric and diabetic patient populations

VYNOVA

VYNOVA™ S5902

VYNOVA™ S5902 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.

VYNOVA

VYNOVA™ S7102

VYNOVA™ S7102 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a specialty resin suitable for extrusion, calendering or injection molding of semi-rigid and flexible PVC articles such as: cling films, flexible sheets, pool liners, inflatables, roofing membrane, profiles, cables insulation and sheathings, and flooring.

NuSil Technology

NuSil™ MED-4162

NuSil™ MED-4162 is a silicone dispersion.

Kuraray

Kuraray Poval™ 8-88

KURARAY POVAL™ 8-88 by Kuraray is a polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is notable for its good bonding strength and pigment binding capacity because PVAs have such good cohesion and good adhesion to fibers, fillers as well as pigments. KURARAY POVAL™ 8-88 is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material for the production of aqueous adhesive solution. In comparison to dextrin and casein it has the advantage of a more uniform chemical structure and greater adhesion, being obtained with minimum raw material requirements. It features water-solubility, excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. It is biodegradable and recyclable. KURARAY POVAL™ 8-88 is used in producing silicon base paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.

AdvanSix

AdvanSix Phenol - High Purity Grade

AdvanSix High Purity Phenol is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, and Pharmaceuticals. Aside from minimum impurities, it has low Benzene content and low water content. It can be used as an intermediate in the production of:Building & Construction Adhesives, flame retardants, fire protection applications, roofing adhesives, sealants and caulks, glazing and window elements, insulation materials, OSB wood applications, and in floor coating and wood flooring applications.Agriculture & FeedAgricultural uses such as animal feed, commercial and residential pest control applications.Automotive & TransportationAftermarket parts, chassis and brake systems, cooling and climate systems, electrical and electronic systems, exterior and body parts, interior parts and lighting, tires, adhesives and sealants for bonding and assembly applications, and in the production of aerospace, automotive and marine fluids and lubricants.Adhesives & SealantsFurniture, industrial, and transportation assembly adhesives.Paints & CoatingsCoatings for marine, rail, mass transit, off road and commercial vehicle, and flooring and wood coating applications.Electrical & ElectronicsDevices and assemblies for consumer electronics, parts and components for housing and enclosure applications, and jacketing and insulation for semiconductor manufacturing.PharmaceuticalsOral drug delivery solutions.

Sasol

LIPOXOL 4000 MED SP

LIPOXOL 4000 MED SP is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

INVISTA

Adi-pure®

Adi-Pure® Adipic acid (hexanedioic acid) is a dicarboxylic acid that is predominately used in the production of nylon 6,6. Other applications include uses as a monomer for polyurethanes and polyamides, and a raw material for plasticizers, wet strength paper resins, copolymer adhesives and binders, and more.

Calumet

Drakeol® 7 LT MIN OIL NF

Drakeol® 7 LT MIN OIL NF is a white oils are among the most versatile products in the world, making them a standard preference across diverse industries. Due to their extreme purity, white oils provide an effective use as a base, emollient, lubricant, release agent, binder, or excipient in multiple product applications.

Monument Chemical

Monument Chemical Tetrahydrofuran (THF)

Monument Chemical Tetrahydrofuran (THF) is a clear, colorless liquid with an ether‐like odor. The principal end uses of THF include PTMEG, pharmaceutical solvent, adhesives, PVC cement and magnetic tape. Due to its' tendency to form peroxides during storage, THF is inhibited with BHT.

Kuraray

Kuraray Poval™ 4-98

KURARAY POVAL™ 4-98 (formerly Mowiol® 4-98) by Kuraray is a fully saponified polyvinyl alcohol having varying degree of polymerization and hydrolysis. It is an odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It provides high cohesion, toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 4-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Stearinerie Dubois

DUB™ 1632

DUB 1632 is Mixture of PEG-6 stearate and ethylene glycol palmitostearate and PEG-32 stearate, IIG.

Shin-Etsu Pharma, Nutra and Food

TYLOPUR® 605

TYLOPUR® 605 is a versatile hypromellose, compliant with USP, JP, EP. It is a film coating material that provides an excellent finish.It is a effective binder, it does not interact with drugs.It also enhances the solubility of poorly solule APIs.

Shin-Etsu Pharma, Nutra and Food

Shin-Etsu AQOAT® AS-MF

Shin-Etsu AQOAT® AS-MF -Hypromellose acetate succinate (HPMCAS, NF, JP) is an enteric coating material that can be used in aqueous or organic media.It is also used as solubility enhancement of poorly soluble APIs.

Calumet

Drakeol® 600 MIN OIL USP

Drakeol® 600 MIN OIL USP is a white oils are among the most versatile products in the world, making them a standard preference across diverse industries. Due to their extreme purity, white oils provide an effective use as a base, emollient, lubricant, release agent, binder, or excipient in multiple product applications.

AB Specialty Silicones

Andisil® VS 165,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Jungbunzlauer Suisse AG

Jungbunzlauer Suisse AG Trimagnesium Citrate

Jungbunzlauer Suisse AG Trimagnesium Citrate meets the requirements of the US Pharmacopeia (USP) and/or the European Pharmacopeia (Ph.Eur.) always in their latest versions.Trimagnesium Citrates are produced by complete neutralization of citric acid with a high purity magnesium source, subsequent precipitation and dehydration. The two commonly available forms are trimagnesium citrate anhydrous and trimagnesium citrate nonahydrate. In some countries such as USA, trimagnesium citrate is simply denominated magnesium citrate. Trimagnesium citrate is mainly used as mineral source in food supplements, foods for particular nutritional purposes, and pharmaceutical preparations. Comparable to other magnesium salts, it shows a laxative effect at higher dosage levels. An agglomerated trimagnesium citrate anhydrous is available for direct compression of tablets. Being an excellent desiccant, it is commonly used to stabilize dry blends and to protect water sensitive ingredients. Magnesium citrates are organic mineral sources and are preferred in many applications to inorganic sources because of their superior bioavailability and physiological compatibility. Trimagnesium citrate anhydrous has the highest magnesium content (16%) among the organic magnesium sources commonly used, the magnesium content of the nonahydrate is 12%. Trimagnesium citrate is supplied as a white to almost white powder. It is practically odorless, soluble in water, freely soluble in diluted acid and practically insoluble in ethanol (96%). generally, hydrated forms of trimagnesium citrates are less soluble than the anhydrous type.granulation types are available as Powder and TMC GN.

Teijin Limited

Panlite® ML-5206ZLP

Injection Molding grade, Light diffusion grade, Weather resistance, Flame resistance

Kuraray

Kuraray Poval™ 10-98

KURARAY POVAL™ 10-98 (formerly Mowiol® 10-98) by Kuraray is a fully saponified, odorless, water-soluble polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. Shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Exhibits good penetration capacity and good adhesion properties. Offers high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 10-98 is suitable for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

NuSil Technology

NuSil™ MED-4850

NuSil™ MED-4850 is a liquid silicone rubber.

Boltaron Inc - A SIMONA Company

Boltaron® 4550

Boltaron® 4550 is a uv resistant far-rated sheet.

3H Vinacom

3H Vinacom PVC Compound

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

NuSil Technology

NuSil™ MED-4870

NuSil™ MED-4870 is a liquid silicone rubber.

Romira

LURANYL® KR 2403 G6

LURANYL® KR 2403 G6 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.

Jungbunzlauer Suisse AG

Jungbunzlauer Suisse AG Zinc Citrate

Jungbunzlauer Suisse AG Zinc Citrate is specified according to the latest edition of the USP.Zinc citrate is available as dihydrate and trihydrate and is produced by complete neutralization of citric acid with a high purity zinc source, subsequent precipitation and dehydration. Zinc citrate is mainly used in dental care products such as toothpastes, mouthwashes and chewing gums due to its antimicrobial and anti-inflammatory effects and its ability to reduce or inhibit the formation of dental plaque and tartar. In pharmaceuticals, zinc citrate fights common colds. Zinc is increasingly used in food supplements, functional foods and beverages. As an organic mineral source it is preferred in many applications over inorganic sources because of its superior bioavailability, physiological compatibility and nearly neutral taste compared to other zinc salts. Among the organic zinc salts zinc citrate has one of the highest zinc content (31%). Zinc citrate is supplied as a white to almost white powder. It is practically odorless, slightly soluble in water, soluble in diluted acid and practically insoluble in ethanol (96%). Zinc citrate has an inverse solubility.

Carbon Inc.

CarbonResin™ MPU 100

CarbonResin™ MPU 100 ofers a unique combination of mechanical strength, biocompatibility, and sterilizability. MPU 100 is Carbon’s first medical-grade material, designed to help medical product manufacturers accelerate product development cycles and improve the quality of their products. Similar to Carbon’s rigid polyurethane materials, MPU 100 is a two component material that produces isotropic parts with fine features.

Zig Sheng Industrial

ZISAMIDE® SP4212

ZISAMIDE® SP4212 is the latest development from high performance Nylon, is produced by the EMS GROUP’s INVENTA-FISCHER. In order to assure the quality and stability, we keep the entire process in consecution.

AdvanSix

AdvanSix Technical Acetone

AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.