products in Healthcare & Pharma

ABITEC Corporation

Captex® 170 EP

Captex® 170 EP is an ester prepared from the dehydration of coco fatty alcohols with caprylic and capric acids. It is a polar lipid suitable for solubilizing many types of active ingredients. It may also enhance translocation of API. It is manufactured in USA.

ABITEC Corporation

Sterotex® HM

Sterotex® HM is a fully-hydrogenated, vegetable-oil powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical and food supplement industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® HM is derived from renewable vegetable oils that are fully refined, bleached, and deodorized and is a neutral organic ester (triglyceride) that is low in ash content and is produced according to Kosher requirements. It is manufactured in USA.

PHARMATRANS SANAQ AG

CELLETS® 500

CELLETS® 500 has shorter and more stable layering process with high yields due to low friability and non-solubility in comparison to standard starter cores.

PHARMATRANS SANAQ AG

SSG SANAQ® Type A

SSG SANAQ® Type A is Blue color with iodine reagent

Calumet

Drakeol® 9 LT MIN OIL NF

Drakeol® 9 LT MIN OIL NF is a white oils are among the most versatile products in the world, making them a standard preference across diverse industries. Due to their extreme purity, white oils provide an effective use as a base, emollient, lubricant, release agent, binder, or excipient in multiple product applications.

AB Specialty Silicones

Andisil® VS 100

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Momentive Performance Materials

Silopren™ LSR 4040

Silopren™ LSR 4040 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4040 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

Teijin Limited

Multilon® MK-1000A

PC/ABS polymer alloy, Automotive series

Toray

Nomex® Honeycomb Core—Aerospace Grade

Toray Nomex® Honeycomb Core—Aerospace Grade is manufactured from Nomex® paper sheets and is coated and bonded together with a phenolic resin. Designed to offer users and designers high strength-to-weight properties at relatively low cost, Nomex® honeycomb is particularly suitable as a core material for production of sandwich structures requiring significant FST performance and using high performance fiber reinforced composites as the facing material.

Stearinerie Dubois

STELLIESTERS DBS

STELLIESTERS DBS is Diester of sebacic acid and butyl alcohol with excellent spreading properties. EP and USP compliance. Suitable for dermal applications.

Romira

ROTEC® ABS 3001

ROTEC® ABS 3001 is ABS, injection molding grade, impact modified.

Kuraray

Kuraray Poval™ 18-88

KURARAY POVAL™ 18-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It exhibits good cohesion and adhesion to fibers, fillers and pigments. It is designed for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It offers good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 18-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology.

Fainplast Compounds

Hax™ HF 241

NuSil Technology

NuSil™ MED-4080

NuSil™ MED-4080 is a high consistency silicone elastomer.

Kraton

Kraton™ D1152 E

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Jungbunzlauer Suisse AG

Jungbunzlauer™ Xanthan Gum TNAS-CS

Xanthan Gum TNAS-CS is the acid stable technical grade 80 mesh type. It is specifically suitable for very low pH applications such as toilet cleaners or descalers. It has excellent thickening and stabilizing properties for a variety of cleaner and detergent applications.

PT Asahimas Chemical (ASC)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH) is an essential raw material and process chemical in many industrial operations. ASC delivers Caustic Soda in 48% solution (Liquid Caustic Soda) and in solid form (Flake Caustic Soda, 98%).

Jungbunzlauer Suisse AG

Jungbunzlauer™ Xanthan Gum TNCS

Xanthan Gum TNCS is a clarified technical grade 80 mesh type. It is specifically suitable for clear solution applications such as gels or window cleaners. It has excellent thickening and stabilizing properties for a variety of cleaner and detergent applications.

Chandra Asri Petrochemical

Trilene PP® RI10HC

RI10HC is a polypropylene ethylene random copolymer with high clarity, for housewares, containers, lids,medical syringes, and general purpose injection molding applications where maximum clarity is desired.This grade uses Unipol® polypropylene technology from Union Carbide Corporation with the latest generation of catalyst.

Elastocon TPE Technologies

Elastocon® STK56PA

Elastocon® STK56PA a colorable thermoplastic elastomer that has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA can be overmolded to polyamide/nylon.Elastocon® STK56PA is supplied as ready to use pellets in 50 lb. bag quantities.

Regar Chemicals

Regar Chemicals DL-Mandelic acid

Regar Chemicals DL-Mandelic acid is mainly used for pharmaceutical intermediate, herbicides dye intermediate, analytic reagent.

LOTTE Advanced Materials

Starex MR-0130

Kuraray

Kuraray Poval™ 40-88

KURARAY POVAL™ 40-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It possesses good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It provides good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 40-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels. Complies with EU Directive 67/548/EC regulation.

Stearinerie Dubois

STELLIESTERS 810 PG

STELLIESTERS 810 PG is Liquid diesters of caprylic and capric acid and propylene glycol alcohols with excellent spreading properties. Complies with EP and USP. Suitable for topical applications.Recommend using STELLIESTERS 810 PG in combination with STELLIESTERS LIQUIDE

NuSil Technology

NuSil™ MED-9031

NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.

Kettlitz-Chemie

Kettlitz Chemie Actigran 70

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Quantum Composites

AMC® 8592

AMC® 8592 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

Greene Tweed

Fluoraz™ 890

Fluoraz 890 is formulated for use in sanitary gaskets where both USP and FDA compliance is required, making it an excellent compound for both pharmaceutical and other hygienic fluid handling applications such as seals for brewery applications. Fluoraz 890 metal and TOC extractable are an orde of magnitude lower than premium competitive FKM formulations, ensuring little or no contamination into the process stream. Fluoraz 890 also meets the extrative requirements of both 21 CFR 177.2600 (e), (f) and 21 CFR 177.240 (d) extraction testing for perfluoroelastomers. Fluoraz 890 sanitary gaskets by Greene, Tweed are designed for minimal intrusion.Fluoraz 784 is also available in O-rings and custom shapes where a low durometer hardness is desired.

Romira

ROMILOY® 8170

ROMILOY® 8170 is PC/ASA, injection molding grade, chlorine-, bromine- and antimon-free flame retardant.

NuSil Technology

NuSil™ MED-4815

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

Kuraray

Kuraray Poval™ 15-99

KURARAY POVAL™ 15-99 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It exhibits varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 15-99 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Momentive Performance Materials

Silopren™ LSR 2640

Silopren™ LSR 2640 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2040, Silopren™ LSR 2640 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2640 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2640 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Cable connectors Parts of medical technical equipment.

Roquette

XYLISORB® 300 Xylitol - Pharma

XYLISORB® Xylitol powders can be used in pharmaceutical and nutraceutical applications as a filler, filler/binder and bulk sweetener that provides nutrient benefits. Applications Swallowable tablets Medicated confectionaries Features Five-carbon polyol with a characteristic crystalline shape Low calorie sugar-free ingredient with high natural sweetness Suitable for use in formulations addressing pediatric and diabetic patient populations

Sasol

LIPOXOL 8000 MED powder

LIPOXOL 8000 MED powder is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Galaxy Surfactants Ltd.

Galaxy™ 789 SP

Galaxy™ 789 SP is a versatile cosmetic ingredient with the INCI name Sodium Coco-Sulfate. Galaxy 789 SP serves multiple functions in the cosmetic industry. It acts as both a surfactant and an emulsifier, making it an essential ingredient for various formulations. This product offers a range of benefits, including effective emulsifying properties, stability at basic pH levels, efficient detergency, and impressive foaming capabilities.

Shin-Etsu Pharma, Nutra and Food

METOLOSE® SR 90SH-4000SR

METOLOSE® SR 90SH-4000SR provides a genuine consistency in Sustained release (matrix tablets). It can be used for semi solid drug products.