products in Chemical & Industrial Manufacturing: General Purpose

Polyplastics Group

Topas® 8007S-04

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

ELIX Polymers, S.L.

Elix™ ABS P2H-AT

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

Lion Elastomers

Royalene® 511

An Excellent Low Viscosity Polymer for High Quality Mechanical Goods

Lion Elastomers

Royalene® 580HT

An Excellent Polymer for Heat Resistant Thermoset Applications and TPO Products

Lion Elastomers

Royalene® 563

A General Purpose Polymer for Hose, Extruded Profiles and Thermoplastic Elastomers

Sylvin Technologies

Sylvin™ 9734-73 Black

Sylvin™ 9734-73 Black is a vinyl compound formulated for injection molding applications that require good mold release.

DOMO Chemicals

Domamid® 66H1

Domamid® 66H1 is polyamide 66, heat stabilized, is used for injection molding.

Sylvin Technologies

Sylvin™ 6071-80 NATURAL

Sylvin™ 6071-80 Natural is a vinyl / nitrile rubber blend formulated for injection molding or extrusion applications that require enhanced low temperature properties.

Molgroup Chemicals

TATREN IM 12 59

TATREN IM 12 59 is impact copolymer of good processing stability and medium fluidity. This grade contains nucleating agent. TATREN IM 12 59 is characterized by high stiffness which is well balanced by good impact resistance.

Lion Elastomers

Royalene® 510

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

Sylvin Technologies

Sylvin™ 86043-66 Clear

Sylvin™ 86043-66 Clear is a vinyl compound formulated with a citrate plasticizer for extrusion applications that require PROP 65 and reach compliance.

Lion Elastomers

Royalene® 539

A High Ethylene, High Mooney Polymer for TPO Products and Extruded Mechanical Goods

Sylvin Technologies

Sylvin™ 9600-85 Clear

Sylvin™ 9600-85 Clear is a vinyl compound formulated for clear molding applications.

Esenttia

ESENTTIA® 05H82-AV

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Polyplastics Group

Topas® 8007F-04

Polyplastics Group Topas® 8007F-04Product DescriptionTOPAS 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast applications, and in coextrusions in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as blister, twist, barrier, shrink and easy tear packaging. Industrial uses include formed decorative sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Pharmaceutical blisters Deep draw barrier trays Shrink films and labels Twist films Decorative sheet Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Excellent deep forming, unlike other barriers High shrink, low stress, gloss, clarity, toughness High gloss, outstanding deadfold, clean cutting Gloss, hardness, chemical resistance, forming Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-600 - robust clarity extrusion grade especially for PE blends Topas® 8007F-04Topas® 8007F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Esenttia

ESENTTIA® 03H82

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Nylene

Nylene® 601

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene

Nylene® 600

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Esenttia

ESENTTIA® 18H86

Characteristics: Medium melt flow rate Homopolymer polypropylene with high cleanness and stable processability, good tenacity/elongation balance, gas fading resistant, excellent whiteness. Recommended for: Staple fibers for carpets, blankets and filters, CF and BCF process for ropes, cords, rugs and carpets, general purpose injection molding applications.

Sylvin Technologies

Sylvin™ 8225-95 Natural

Sylvin™ 8225-95 Natural is a vinyl compound formulated for general purpose extrusion or molding applications.

Sylvin Technologies

Sylvin™ 8203-55 Black

Sylvin™ 8203-55 Black is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 8203-55 Green 3172

Sylvin™ 8203-55 Green 3172 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 8925-80 BLACK

Sylvin™ 8925-80 Black is a vinyl compound formulated for profile extrusion applications.

Nylene

Nylene® 132L

Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Polyplastics Group

Topas® 8007F-600

Polyplastics Group Topas® 8007F-600Product DescriptionTOPAS 8007F-600 is a new robust film extrusion grade designed for blending with polyethylene (PE). It is an improved clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in both cast and blown processes, and in monolayer and multilayer products. Leading film applications include twist wrap, forming webs, protective packaging, shrink films and labels, and easy tear packaging. Industrial uses include formed PE and PP sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Forming films (header bags, etc.) Protective packaging Shrink films and labels Twist films Decorative sheet Food packaging Food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Stiffness for downgauging, improved forming High shrink, low stress, gloss, toughness Outstanding deadfold, clean cutting Stiffness, chemical resistance, forming, even draw Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-04 - ultimate clarity extrusion grade Topas® 8007F-600Topas® 8007F-600 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

DOMO Chemicals

Domamid® 66

Domamid® 66 is polyamide 66, is used for injection molding.

Nylene

Nylene® NX3024F

Nylene Nylene NX3024F is a medium viscosity nylon 6 resin suitable for general purpose molding applications. In addition to excellent melt stability and good melt strength, NX3024F has excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene NX3024F meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die.

Cri-Tech, Inc.

Cri-Line™ GP-615

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Sana Minerals

ACCR 106

ACCR 106 is a fine white powder. It is processed from white marble.

Sylvin Technologies

Sylvin™ 4225-80 Black

Sylvin Technologies Sylvin™ 4225-80 Black is a vinyl compound formulated per ASTM D2287-96 with a 50502 callout. This compound is suitable for extrusion or injection molding applications.

Teijin Limited

Panlite® LS-2250

Frictional wear resistant grade

Sylvin Technologies

Sylvin™ 8808-70D Natural

Sylvin™ 8808-70D Natural is semi-rigid vinyl compound formulated for extrusion applications.

Sylvin Technologies

Sylvin™ 8203-55 Grey 9540

Sylvin™ 8203-55 Gray 9540 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 8873-92 White 1196

Sylvin™ 8873-92 White 1196 is a vinyl compound formulated for coextrusion applications.

Nylene

Nylene® 132 HSL

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Pinnacle Polymers

Pinnacle™ PP 1112

12 MELT FLOW HOMOPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1112 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general-purpose injection molding such as resin furniture, closures, and consumer product applications.The 1112 product provides: Excellent color and processing stability Good flow characteristics Excellent organoleptic properties UL Listed Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.