Products in Industrial: Carbon Fiber

AGC Chemicals Americas, Inc. Fluon+™ FC 491 (340491020) is a 25% carbon and graphite filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Carbon & graphite powder are added to PTFE to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

GRANOC YARN XN-60-A2S used for industrial and sports application.

HS Carbon Fiber UD150H60 is a E3 Matrix System with a precursor as PAN.

C-TAPE™ U600P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 651 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. *Disponible également en fiber FOE

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

Carbon Fabrics 38375 is made of carbon fiber by plain weaving style.

HS Carbon Fiber UD100H60 is a E3 Matrix System with a precursor as PAN.

CARBON FABRICS 824 is used in diverse markets such as Aerospace & Defense, Infrastructure, Medical, Marine, Sporting Goods and Industrial Products.

StarPCS™ SBMC-843 is a discontinuous carbon fiber reinforced molding compound containing carbon fiber, a Starfire proprietary polysiloxane resin, and refractory particulate. SBMC-843 contains a Polyramic® thermosetting resin which cures at temperatures between 200-310°C, and functions as a high temperature carbon fiber reinforced structure with a silicon oxycarbide ceramic matrix. Compression mold curing produces a green fiber reinforced polymer matrix composite (PMC) material. Further processing to 850°C minimum in inert environment results in an amorphous silicon oxycarbide ceramic matrix composite (CMC) to be used with different infiltration polymers or materials. Ideal infiltration polymers include Polyramic® SPR-212, SPR-212 based slurries (SL-227, SL-480), and other Starfire® polysiloxane products.

SC-06-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

IM Carbon Fiber UD150H60-MR60H is a E3 Matrix System with a precursor as PAN.

ACM С400Т/P is a Balanced Woven Fabric with Standard fabric width of 1250 mm and Custom width range of 300—1600 mm having EP/VE Resin compatibility.

ZOLTEK’s Type-45 chopped fiber is high bulk density values which allow for cleaner and more consistent flow rates, maintains its integrity from the package, into, and through the hopper and distributes easily during compounding, improving process and product performance and has excellent mechanical and electrical properties.

Carbon UDs 38486 is made of UD fabric by plain weaving style.

Conductive Composites Nickel Coated Fibers - Precision Coated & Converted Fibers (PC2F) 1AC1PC-0.15 is a highly uniform, conductive short fiber format in lengths from 3mm to 100µm. PC2F is a high-performance conductive and structural fiber with superior handling properties and excellent conductivity/shielding capabilities that is both lighter and longer than typical nickel coated graphite formats. Through our proprietary Chemical Vapor Deposition (CVD) coating process, fibers are coated with a very thin, robust, and ductile film of pure nickel. Due to their precise lengths and easy dispersion, PC2F is a very effective and economical conductive additive. With a wide range of available nickel coating levels and lengths, our easily dispersible conductive short fiber format is perfectly suited for conductive gaskets, elastomer, sealants, adhesives, paints, and other coatings.

TC-09-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Applied Sciences Inc. PR-19-XT-LHT is produced by heat-treating the fiber at 1500°C. This converts any chemically vapor deposited carbon present on the surface of the fiber to a short range ordered structure. The inherent conductivity of the fiber is increased.

Applied Sciences Inc. PR-24-XT-HHT is produced by heat-treating the as-produced carbon nanofiber to 3000°C. This converts the fiber to a fully graphitized form and creates a highly conductive carbon nanofiber. The iron content (i.e., the catalyst) is also reduced to very low levels.

Procotex CF-0.5mm : mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

QISO® MIM-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® MIM-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

UNDIRECTIONAL FABRIC 4378 is a unidirectional fabric.

Procotex CF.LS-MLD150 is a mixture of all origin carbon and graphite ex-PAN fibers,obtained from pure carbon fibers, selected and milled for compounding. Its very low sizing level, which can vary, is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

Conductive Composites Nickel Coated Fibers - Precision Chopped (PCF) has developed a proprietary Chemical Vapor Deposition (CVD) coating process where fibers are coated with a very thin, robust, and ductile film of pure nickel. Our process produces a conductive fiber with superior handling properties and excellent conductivity/shielding capabilities. Through a Precision Converting Process, these fibers are converted into short, precise, millimeter and sub-millimeter coated fiber lengths. This provides our customers and partners with a high-performance structural and conductive additive that is both lighter and longer than typical nickel coated graphite powder. Due to their precise lengths and easy dispersion, precision chopped fibers are very effective and economical as a conductive additive for paints, gaskets, sealants, molding compounds, and adhesives.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

Carbon UDs DW0164 (Width 1250) is made of UD fabric by plain weaving style.

AKSACA™ AC 0101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

ZOLTEK’s Type-83 chopped fiber format has high bulk density values which allow for cleaner and more consistent flow rates, compact pellet form maintains its integrity from the package, into, and through the hopper and distributes easily during compounding, improving process and product performance and has excellent mechanical and electrical properties.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.