Products in Industrial: Odorless

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

WACKER® AK 350 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 350 mm²/s. Its chemical structure gives WACKER® AK 350 unique properties that differentiate it from organic materials like mineral oils. It has a low solidifying point and exhibits good solubility in a wide range of solvents.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.

WACKER® AK 100000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.

WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

Ketron® CM HPV Polyetheretherketone PEEK shapes, a compression molded, carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. Features: Compression molded and carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Low wear and friction, and high LPV Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Low coefficient of friction and best machinability of all PEEK materials Suitable for wear and friction applications Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® CM HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® CM HPV PEEK is the ideal solution.

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.

Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.

Ertalyte® TX Polyethylene Terephthalate Polyester PET is an unreinforced, semi-crystalline grade that offers superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance, and great chemical and abrasion resistance. This grade is designed to withstand high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.Features:Superior dimensional stabilityExcellent wear resistanceLow coefficient of frictionHigh strength and rigidityOutstanding stain resistanceGreat chemical and abrasion resistanceBenefits:Withstands high pressure and velocity conditionsLow moisture absorption rate ensures mechanical and electrical properties are unaffected by moistureLow wear rate compared to unmodified polyestersIdeal for use in environments with soft metal and plastic mating surfaces where noise abatement is criticalApplications:High pressure and velocity applicationsFood processing and packagingPharmaceuticalOil and gas industriesMechanical precision parts that must endure high loads and wear conditions.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.

Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

CHT Group TE-352 FG is a 40% active food-grade emulsion with superb stability over a wide pH range. Its exceptional particle size and tight distribution also provide excellent freeze-thaw stability. This product is designed specifically for the de-nesting of plastics used in thermoforming, conveyor belts, and lubrication applications.

ALPA-LSR 140201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

ALPA-LSR 130201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

CHT Group TE-35K FG is a 40% active food-grade emulsion with superb stability over a wide pH range. This product is best suited for de-nesting plastics used in thermoforming for all food packaging resins, rubber treatment, canning applications, and conveyor belts and lubrication.

CHT Group EM 1463 FG is CHT’s premier 35% active food-grade emulsion that can be diluted to 1% active. It has small particle size and is the best de-nester with extreme dilution. It can be used in continuous process plastic molding as an antistatic for food-grade packaging and for de-nesting of plastics used in thermoforming.