products in Industrial: Automotive Applications

BARLOG plastics GmbH

Kebatron® PPS FWL1040G1

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Samyang Corporation

TRIREX® 3025FD

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.Agency Ratings : USP Class VITRIREX 3025FD is a polycarbonate resin grade which has high impact strength in combination with superior mechanical and physical property.APPLICATIONS TRIREX 3025FD resin grade is used for Medical devices, food contact materials and etc. Medium viscosity. Transparent colors only.

3D Systems

Accura® 25

Features Fexible Snap fit assemblies Master patterns for vacuum casting Durable functional prototypes

BARLOG plastics GmbH

Kebater® PBT A9045

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

BARLOG plastics GmbH

Kebablend® / M 48/90 PPS

PPS functional compound for the production of plastic-bonded magnets

BARLOG plastics GmbH

Kebablend® / M 40/71 PPS

PPS functional compound for the production of plastic-bonded magnets

Eurostar Engineering Plastics

Starflam™ MX06089

Starflam MX06089 is an Unfilled Flame Retardant Polypropylene Injection Molding Grade

Samyang Corporation

TRIREX® 3022IR(T)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022IR(T) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022IR(T) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

ENSO Plastics

ENSO RESTORE™

Enso Restore™ is leading edge technology accelerates the natural biodegradation of plastics, rubbers and other materials, offering a simple and effective solution to an enormous environmental challenge. Using as little as 1% ENSO RESTORE, your final product will be biodegradable for just a fraction of its manufacturing cost. Available in pellet, powder and liquid forms, RESTORE is a drop-in technology. integrating seamlessly into existing manufacturing methods, making expensive infrastructure changes unnecessary. It is a viable solution for companies of all sizes. ENSO RESTORE is used in a variety of applications worldwide – from bags and bottles to packaging and durable goods, it is trusted by hundreds of brand owners to provide a solid end-of-life solution. .

Plastcom, spol. s r.o.

SLOVAMID 66 GF 15 T 6 TS

PA 66 reinforced with glass fiber and mineral filler, heat stabilized

Samyang Corporation

TRIREX® 3025IR

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Polykemi AB

Polyform™ C M90 GF10

Polykemi AB Polyform™ C M90 GF10 is an acetal POM copolymer product filled with 10% filler. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic is flame rated.

Greene Tweed

Fluoraz™ 797

This product is only available as a finished part, please contact Green, Tweed & Co. to discuss part availability, 215-216-9521.

DIC Corporation

DIC.PPS® FZ-1140

Outline: FZ-1140 is a 40% glass fiber reinforced polyphenylene sulfide compound that is well balanced with excellent engineering properties and processability. Color: Black and Natural (Brown)

Nilit

Nilamid® A3 MGF2010

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nylene

Nylene® 603

Nylene Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.

Braskem America

Braskem America KN-501

Braskem KN-501 is a polypropylene impact copolymer (ICP) with excellent color and processing stability, excellent long term heat aging properties, and wet/dry environment resistance.

AdvanSix

Aegis® H8202NL

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® MBM

Aegis® MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

Valex Group

VALEX™ Natural Rubber SGR-10CV

VALEX™ Natural Rubber SGR-10CV is commonly used as Polymer Compounding for a variety of applications.

Nilit

Nilamid® A3 H

Nilit Nilamid® A3 H is a nilamid® a3 is an unfilled polyamide 66 (nylon 66) compound heat stabilized.This compound is intended for injection molding.Nilamid® a3 is primarily designed for the automotive industry. It is also suitable for electrical and electronic or industrial & consumer applications.

BARLOG plastics GmbH

Kebaform® C 906 LF

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Dynasol Elastomers

Emulprene™ 1013A

Emulprene 1013A is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process.

IruChem

Irubond 700

Irubond 700 is a compatibilizer, coupling agent in polyethylene system.

BARLOG plastics GmbH

Kebaform® / C 901 TS

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Saint-Gobain

Korton™ PVDF

Korton PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Korton PVDF include automotive, electrical/electronic applications, aerospace, bags/liners and coating applications.Characteristics include: Flame Rated Chemical Resistant Corrosion Resistant Fatigue Resistant Heat Resistant

Samyang Corporation

TRIBIT® 1500G30

TRIBIT® 1500G30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Nilit

Nilamid® A3 J28

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

Nilit

Nilamid® A3 TM2

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/12

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Nilit

Nilamid® B3 GF30 TM2

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Dynasol Elastomers

Paraclean™ 33L50

Paraclean 33L50 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Lati Industria Thermoplastici S.p.A

Latan™ 13 S/30

Polyoximethylene (POM) based compound. Glass beads. Medium viscosity. High dimensional stability.

BARLOG plastics GmbH

Kebablend® / WR 01/1220

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

Toray

Toraycon® 1101G-X53

Toray Toraycon® 1101G-X53 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated and good esthetics.

Eurostar Engineering Plastics

Starflam™ M10009A

Starflam M10009A is an Unfilled Flame Retardant Polypropylene (Homo) Injection Molding Resin