products in Industrial: Electrical/Electronic Applications

Politem Plastik

SPINOPC® P16-061

SPINOPC® P16-061 is a PC %20 GLASS FIBER BLACK for injection applications.

Global Polymers Corporation

Global Polymers Corporation Global ABS-405 FR High Impact, Flame Retardant ABS

Global ABS-405 FR High Impact, Flame Retardant ABS is Poly(Acrylonitrile Butadiene Styrene) thermoplastic

BARLOG plastics GmbH

Kebablend® / M 15/19 PPS

PPS functional compound for the production of plastic-bonded magnets

Ovation Polymers

Nemcon™ H PC/ABS DP182

Polycarbonate/Acrylonitrile Butadiene Styrene, thermally and electrically conducting grade.

Toray

Amilan® CM1023G1000

Toray Amilan® CM1023G1000 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and wear resistant.

SCGTPE Industrial

SCGTPE Industrial SA6N-U01

SOULEFLEX® SA6N-U01 is Cost Effective Adhesion Technical Grade-Bonding to ABS, PC and ABS/PC

Nanocyl

PLASTICYL™ HDPE1501

PLASTICYL™ HDPE1501 is a conductive masterbatch based on high-density polyethylene loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ HDPE1501 is ideal for injection molding and extrusion processes.

Okulen

OKULEN® 500 AST black FN9200

OKULEN® 500 AST black FN9200 is a permanent conductive modified HMW-PE polymer. This material is used for applications in which it is not allowed to build up static properties. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested on representative samples by the TÜV-Nord (Germany).

Aronkasei Co.,Ltd.

Aronkasei AR-791

Aronkasei AR-791 is styrene type elastomer AR.

PROFILAN Kunststoffwerk

PROlen 6000 EL

PROlen 6000 EL antistatically equipped, especially for high-speed production lines, but also suitable for contact with food.

Teijin Limited

Panlite® G-3410R

Glass fiber reinforced grades-10% Glass fiber

Shenzhen Xinghua Pigment Masterbatch

Shenzhen Xinghua Pigment Masterbatch Pigment Orange 13

Shenzhen Xinghua Pigment Masterbatch Pigment Orange 13 is benzidine orange pigment. It provides high resistance to heat, good migration fastness and excellent light fastness. It can be used in rubber. Pigment Orange 13 is recommended for PE, PP, EVA, POM and PVC.

Fudow Company

Fudow Company F5802F

Fudow Company F5802F is organic filler.

A.D. Compound S.p.A.

ADLAS® O07FFB-01

PP Homopolymer Industrial Black 20% Glass Fiber filled

BARLOG plastics GmbH

Kebater® PBT BF220

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH

Kebablend® / M 48/67 PA12

PA12, functional compound for the production of plastic-bonded magnets. Due to the high degree of filling with rare earths, KEBABLEND / M 48/67 PA12 enables the injection molding of very powerful magnets.

Traid Villarroya Hnos

TKG® FLON (PTFE)

TKG® FLON (PTFE) is chemically inert up to high temperatures and pressures, it is completely non-toxic and has unbeatable non-stick properties since its coefficient of friction is the lowest known among solids.

A.D. Compound S.p.A.

PERLER® O07H2500A11

PP Stabilized Copolymer Industrial Black 25% Talc filled

Shenzhen Xinghua Pigment Masterbatch

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 12

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 12 is yellow colored disazo pigment. It provides high heat resistance, excellent light fastness and very good migration resistance. Pigment Yellow 12 can be used in PP, PVC and rubber. It is recommended for PE, EVA and POM.

Avanzare Innovacion Tecnologica

avanION 13

avanION 13 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

BARLOG plastics GmbH

Kebablend® / EC FE 190106 PPS

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

Sinoplast

Sinoplast Glass Fiber 150-G20

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

Nilit

Nilamid® A3 GF50 TM2

Nilit NILAMID® A3 GF50 TM2 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 GF50 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Sinoplast

Sinoplast Mineral Fiber Strengthened 150-T25-HG

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

Aronkasei Co.,Ltd.

Aronkasei AR-720

Aronkasei AR-720 is styrene type elastomer AR.

BARLOG plastics GmbH

Kebater® PBT BF250

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

Lati Industria Thermoplastici S.p.A

Latistat™ 47/7-03

Dissipative product based on Polypropylene copolymer (PPc). Unfilled.

Samyang Corporation

TRIREX® 3025IR(03)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR(03) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR(03) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Lati Industria Thermoplastici S.p.A

Latishield™ 36/RT-05A

Nilit

Nilamid® A3 HH GF30

Nilit NILAMID® A3 HH GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, high heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 HH GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit

Nilamid® B3 N

Nilit NILAMID® B3 N is an unfilled nucleated easy flow Polyamide 6 (Nylon 6) compound.This compound is intended for injection molding.NILAMID® B3 N is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Samyang Corporation

TRIBIT® 1500N

TRIBIT® 1500N is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

A.D. Compound S.p.A.

ADENE® O07UFBG-00

PP Copolymer Industrial Black 20% Talc filled

DK Kunststoff

DK Kunststoff PA6

PA6 is also known as Nylon 6 or polycaprolactam. It is a semicrystalline polyamide.

COMCO EPP

Comco PVC U

Comco PVC U is a plasticiser-free PVC which features excellent chemical resistance and good workability. Thanks to its good electrical insulating properties, high resistance to acids, alkalines and saline solutions and easy processing, PVC has proven itself in the chemical industry. It is well established as a common material in container and plant construction, the electrical industry and the construction industry. It is free of DOTE, lead, cadmium, CFC, silicone, PCB, bisphenol A, plasticisers and heavy metals.

Politem Plastik

RUGOPPA® P17-105-1

RUGOPPA® P17-105-1 is a PPA/PET %35 glass fiber white (Heat Aging) for injection application.