products in Industrial: Industrial Applications

Processing Methods: Extrusion

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Chemical Name: Benzenesulfonic acid, C10-13-alkyl derivs., sodium salts

Sasol

SOLFODAC DBL-60

CAS Number: 68411-30-3

Functions: Surfactant, Surfactant (Anionic)

Chemical Family: Linear Alkylbenzene Sulfonic Acid (LABSA), Alkyl Sulfonates

SOLFODAC DBL-60 is the sodium salt of linear alkyl benzene sulphonic acid. Linear alkyl benzene sulphonic acid is diluted with water and neutralized with sodium hydroxide up to neutral pH. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Chemical Family: Alkyl Ether Sulfates

Sasol

ALFOTERRA 123-8S 90

Functions: Surfactant

Compatible Substrates & Surfaces: Paper

ALFOTERRA 123-8S 90 is the sodium salt of ISALCHEM 123 fatty alcohol propoxy-sulfate with about 85% active matter. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Chemical Family: Polyglycols, Polyols

Sasol

PLURODAC 44

Functions: Surfactant

Compatible Substrates & Surfaces: Paper

Synonyms: Ethylene oxide-propylene oxide copolymer phosphate, Oxyethylene-oxypropylene copolymer phosphate ester, Polyethylene-polypropylene glycol ester with phosphoric acid, Polyethylene-polypropylene glycol phosphate

PLURODAC 44 is a block copolymer, based on a central propylene glycol chain extended with polyethylene glycol at both ends. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Polymer Name: Perfluoroelastomer (FFKM)

Precision Polymer Engineering

Perlast® G76W

Features: High Strength, Low Compression Set, Oxidation Resistant

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

Polymer Name: Polypropylene Homopolymer (HPP)

Prime Polymers

Prime Polypro™ J105G

Prime Polymers Prime Polypro™ J105G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ J105G include household applications and industrial applications.Characteristics include: Homopolymer Rigid

DOMO Chemicals

Domamid® 66G30H1

Flexural Modulus: 8600.0 - 8600.0 MPa

Domamid® 66G30H1 is polyamide 66, 30% glass fiber reinforced, heat stabilized, is used for injection molding.

Nilit

Nilamid® B3 W GB30

Fillers Included: Glass Bead

Nilit NILAMID® B3 W GB30 is a Polyamide 6 (Nylon 6) compound, 30% glass bead reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Polymer Name: Polyvinyl Chloride (PVC)

Sylvin Technologies

Sylvin™ 9734-73 Black

End Uses: Tubing, Industrial Applications, General Purpose

Sylvin™ 9734-73 Black is a vinyl compound formulated for injection molding applications that require good mold release.

Polymer Name: Polyphenylene Sulfide (PPS)

DIC Corporation

DIC.PPS® Z-650

Fillers Included: Mineral, Glass Fiber

Additives Included: Flame Retardant

Outline: Z-650 is a glass fiber and mineral filled super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance with improved dimensional stability. Color: Black

AdvanSix

Aegis® H8202NLB

Processing Methods: Injection Molding, Compounding

Flexural Modulus: 3010.0 - 3010.0 MPa

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® H95ZI

Processing Methods: Extrusion, Profile Extrusion, Compounding

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Functions: Emulsifier, Surfactant (Nonionic), Surfactant

Sasol

MARLOSOL TA 60

CAS Number: 69011-36-5

Chemical Family: Alcohol Ethoxylates

Ingredient Origin: Petrochemical, Synthetic

Labeling Claims: Biodegradable

Synonyms: Poly(oxy-1,2-ethanediyl), α-tridecyl-ω-hydroxy-, branched

MARLOSOL TA 60 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Functions: Emulsifier, Surfactant (Nonionic), Surfactant

Sasol

MARLOSOL TA 90

CAS Number: 69011-36-5

Chemical Family: Alcohol Ethoxylates

Ingredient Origin: Petrochemical, Synthetic

Labeling Claims: Biodegradable

Synonyms: Poly(oxy-1,2-ethanediyl), α-tridecyl-ω-hydroxy-, branched

MARLOSOL TA 90 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Chemical Name: Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol)

Sasol

PLURODAC 61

CAS Number: 9003-11-6

Functions: Dispersant, Surfactant

Chemical Family: Polyglycols, Polyols

PLURODAC 61 is a block copolymer, based on a central propylene glycol chain extended with polyethylene glycol at both ends. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Functions: Anti-Foaming Agent, Surfactant, Dispersant

Sasol

PLURODAC 81

CAS Number: 9003-11-6

Chemical Family: Polyglycols, Polyols

PLURODAC 81 is a block copolymer, based on a central propylene glycol chain extended with polyethylene glycol at both ends. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Polymer Name: Polyphenylene Sulfide (PPS)

DIC Corporation

DIC.PPS® CZL-2000

Fillers Included: Carbon Fiber, PTFE Fiber, PTFE

Additives Included: Flame Retardant

Outline: CZL-2000 is a pitch based carbon fiber and poly tetra fluoro ethylene filled PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black

DOMO Chemicals

Domolen® PPHHVG30UV1 901 BK

Polymer Name: Polycarbonate (PC)

Teijin Limited

Panlite® G-3420H

Additives Included: Mold Release Agent

Flexural Modulus: 5000.0 - 5000.0 MPa

Glass fiber reinforced grades-20% Glass fiber, Low anisotropy grade

Polymer Name: Thermoplastic Elastomer (unspecified)

Elastocon TPE Technologies

Elastocon® 8068N

Processing Methods: Extrusion, Injection Molding, Blow Molding

End Uses: Consumer Applications, Medical Devices, Medical/Healthcare Applications

Density: 1030.0 - 1030.0 kg/m³

Tear Strength: 157.0 - 157.0 kN/m

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Polymer Name: Thermoplastic Elastomer (unspecified)

Elastocon TPE Technologies

Elastocon® 8150B

Processing Methods: Blow Molding, Extrusion, Injection Molding

End Uses: Industrial Applications, Consumer Applications

Density: 1120.0 - 1120.0 kg/m³

Tear Strength: 110.0 - 110.0 kN/m

Elastocon® 8150B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8150B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8150B can be overmolded to polypropylene.Elastocon® 8150B is supplied as ready to use pellets in 1000 lb. quantities.

Polymer Name: Polyester (unspecified)

Aliancys

Palatal® P51-01

Flexural Modulus: 3300.0 - 3300.0 MPa

Polymer Name: Polypropylene Impact Copolymer (ICP)

Phillips66

Copylene® CM120LN

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 12.0 - 12.0 g/10 min

COPYLENE® CM120LN is a High Impact copolymer formulated with antistat and nucleation to excel in injection molding processes. It is made with a non-phthalate catalyst.

Polymer Name: Polyphthalamide (PPA)

DOMO Chemicals

Thermec™ N 4314R35H

Polymer Name: High Density Polyethylene (HDPE)

Chandra Asri Petrochemical

Asrene® UB5206H

Processing Methods: Blow Molding

Melt Flow Index: 0.07 - 0.07 g/10 min

Asrene® UB 5206H is a High Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UB 5206H include containers, electrical/electronic applications, industrial applications, plumbing/piping/potable water and wire & cable.Characteristics include: Good Stiffness Hexene Comonomer High ESCR (Stress Crack Resistant) Impact Resistant

Polymer Name: Solution Styrene Butadiene Rubber (SSBR)

Dynasol Elastomers

Solprene® 303

Processing Methods: Compounding, Extrusion, Compression Molding

End Uses: Footwear, Industrial Applications

Features: Random Copolymer, Linear Polymer Structure

Solprene 303 is a linear random-block styrene-butadiene copolymer with 46% styrene content, 11% present as a polystyrene block.Solprene 303 is used in vulcanized microcellular shoe soles; it provides hardness and can be combined with inorganic fillers using high concentration of them with good dispersion in compounding. It can be blended with other rubbers to reduce die swell and increase processability in extruded and molded goods by compression.It can replace E-SBR 1009 and 1018 types.

Nilit

Nilamid® A3 J10 GF13

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Polymer Name: Polyacetal Homopolymer (POM)

BARLOG plastics GmbH

Kebaform® / C 25 H

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

DOMO Chemicals

Domamid® 66H1

Flexural Modulus: 2800.0 - 2800.0 MPa

Domamid® 66H1 is polyamide 66, heat stabilized, is used for injection molding.

Nilit

Nilamid® A3 GB30

Fillers Included: Glass Bead

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Polymer Name: Polybutylene Terephthalate (PBT)

BARLOG plastics GmbH

Kebater® PBT B512A

PBT unreinforced, flame retardant

Density: 1270.0 - 1270.0 kg/m³

Sylvin Technologies

Sylvin™ 6071-80 NATURAL

Polymer Name: NBR/PVC

Tensile Strength: 17.23 - 17.23 MPa

Tear Strength: 66.54 - 66.54 kN/m

Sylvin™ 6071-80 Natural is a vinyl / nitrile rubber blend formulated for injection molding or extrusion applications that require enhanced low temperature properties.

Polymer Name: Polycarbonate (PC)

Teijin Limited

Panlite® GN-3610Z

Glass fiber reinforced grades - 10% Glass fiber, Flame resistant grade, Non-bromine/non-phosphor type, Weather resistant

AdvanSix

Aegis® H35ZI

Additives Included: Lubricant (Unspecified)

Flexural Modulus: 2465.0 - 2465.0 MPa

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Polymer Name: Polyamide 6/66 (PA 6/66)

AdvanSix

Aegis® H55C2ZP

Processing Methods: Extrusion, Injection Molding, Compounding

Aegis® H55C2ZP is a 2.7 RV, unfilled, medium viscosity, non-lubricated, polyamide 6/66 copolymer for molding or compounding. With a broad processing window and excellent melt fluidity for filling thin sections, it provides exceptional processability. Aegis® H55C2ZP resin combines strength, stiffness and toughness with chemical and abrasion resistance. For glass- or mineral-filled applications, Aegis® H55C2ZP resin also offers superior surface appearance and low warp.

Functions: Emulsifier, Surfactant (Nonionic), Surfactant

Sasol

MARLOSOL TA 30

CAS Number: 69011-36-5

Chemical Family: Aluminum Compounds, Alcohol Ethoxylates

Ingredient Origin: Petrochemical, Synthetic

Labeling Claims: Biodegradable

Synonyms: Poly(oxy-1,2-ethanediyl), α-tridecyl-ω-hydroxy-, branched

MARLOSOL TA 30 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.