products in Industrial: Tubing

Momentive Performance Materials

Addisil™ 480 E

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Sylvin Technologies

Sylvin™ 8225-95 Natural

Sylvin™ 8225-95 Natural is a vinyl compound formulated for general purpose extrusion or molding applications.

Momentive Performance Materials

LIM™ 6030

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Elastocon TPE Technologies

Elastocon® 3360

Elastocon® 3360 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3360 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3360 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3360 is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon TPE Technologies

Elastocon® CLR75

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

Sylvin Technologies

Sylvin™ 8925-80 BLACK

Sylvin™ 8925-80 Black is a vinyl compound formulated for profile extrusion applications.

Saint-Gobain

Rulon® 1337

Rulon® 1337 is a tan material made entirely from FDA compliant components. It has excellent physical properties and is chemically compatible with most chemicals, except concentrated sulfuric acid. This offers much flexibility in wash-down environments of food and pharmaceutical processing environments. It has a slightly lower coefficient of friction than Rulon J, offering extended life and less abrasion with softer mating surfaces. It is compatible with most commercially available natural lubricants for additional reduction in friction.

JSR Corporation

Techno Polymer JSR CHLOROBUTYL 1066

JSR CHLOROBUTYL 1066 excels in air Impermeability, is weather resistance, ozone resistance, heat resistance, and aging resistance. The heat aging resistance is improved for chlorobutyl and bromobutyl in comparison with regular butyl rubber.

Momentive Performance Materials

Addisil™ 160 E

Addisil™ 160 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Dynasol Elastomers

Paracril™ OZOM58

Paracril OZOM58 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Saint-Gobain

Norprene™ A70F

Norprene A70F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A70F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Kettlitz-Chemie

Kettlitz Chemie Mediaplast CL/GR

Mediaplast CL/GR is a Chlorinated thermostable paraffin as ”dry liquid“ to improve the polarity of rubber compounds especially based on EPM, EPDM and IIR for UHF curing. In combination with antimony trioxide Mediaplast CL/GR may also be used as flame retarding component.

Sylvin Technologies

Sylvin™ 8203-55 Black

Sylvin™ 8203-55 Black is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Elastocon TPE Technologies

Elastocon® STK60

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

Kettlitz-Chemie

Kettlitz Chemie TAC/GR 70

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Sylvin Technologies

Sylvin™ 4225-80 Black

Sylvin Technologies Sylvin™ 4225-80 Black is a vinyl compound formulated per ASTM D2287-96 with a 50502 callout. This compound is suitable for extrusion or injection molding applications.

Kettlitz-Chemie

Kettlitz Chemie TAIC 70

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Sylvin Technologies

Sylvin™ 8203-55 Grey 9540

Sylvin™ 8203-55 Gray 9540 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Elastron

SEBS - ELASTRON G101.A83.B

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Elastocon TPE Technologies

Elastocon® CLR40

Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene.Elastocon® CLR40 is supplied as ready to use pellets in 40 lb. bag quantities.

Rauh Polymers

PermaFelx® 50

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

JSR Corporation

Techno Polymer JSR BUROMOBUTYL 2255

JSR BUROMOBUTYL 2255 excels in air Impermeability, is weather resistance, ozone resistance, heat resistance, and aging resistance. The heat aging resistance is improved for chlorobutyl and bromobutyl in comparison with regular butyl rubber.

Kureha Corporation

Kureha Corporation KF 2950

Kureha Corporation KF 2950 PVDF homopolymer is a medium viscosity PVDF resin typically processed by extrusion offering: excellent chemical resistance at ambient and elevated temperatures; inherent UV stable; mechanical toughness; and, excellent abrasion resistance.

Dynasol Elastomers

Paracril™ OZO3341

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

Kolon Industries

Kocetal® K100

Kocetal K100 is a high viscosity grade and suitable for extrusion and injection moldings.

Saint-Gobain

Tygon™ R-3603

Tygon R-3603 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Corrosion Resistant Good Flexibility

Sylvin Technologies

Sylvin™ 8808-70D Natural

Sylvin™ 8808-70D Natural is semi-rigid vinyl compound formulated for extrusion applications.

JSR Corporation

Techno Polymer JSR BUROMOBUTYL 2244

JSR BUROMOBUTYL 2244 excels in air Impermeability, is weather resistance, ozone resistance, heat resistance, and aging resistance. The heat aging resistance is improved for chlorobutyl and bromobutyl in comparison with regular butyl rubber.

Kettlitz-Chemie

Kettlitz Chemie Antitack BTO-7

Antitack BTO-7 is a pigment-free antitack agent for the treatment of unvulcanized rubber compounds based on different biodegradable detergents in combination with anti-foam and anti-corrosive additives. The product was developed especially for the treatment in batch-off equipment working in dipping or spraying system. The use of Antitack BTO-7 results in an extremely proper production site and in a very low wear and tear of the machinery.

Polyplastics Group

Topas® 6017S-04

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Elastron

SEBS - ELASTRON G300.A85.N

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast 60

Mediaplast 60 is a highly effective chemical peptizer for natural and Isoprene rubber, based on the well-known dibenzamidodiphenyldisulfide (DBD). However, it does contain an activator/catalyst system which enables the product to show superior efficiency in comparison to the products you find on the market today.

Sylvin Technologies

Sylvin™ 8873-92 White 1196

Sylvin™ 8873-92 White 1196 is a vinyl compound formulated for coextrusion applications.

Sylvin Technologies

Sylvin™ 4280-60 Natural

Sylvin™ 4280-60 Natural is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Momentive Performance Materials

Tufel™ II 94306

Tufel™ II Silicone Rubber Compounds 94206 and 93306 are 20 and 30 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Elastocon TPE Technologies

Elastocon® 8068B

Elastocon® 8068B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068B is well suited for consumer goods and industrial applications requiring increased U.V. stability. Elastocon® 8068B can be overmolded to polypropylene.Elastocon® 8068B is supplied as ready to use pellets in 50 lb. bags and 1000 lb. box quantities.