products in Industrial: Tubing

Sylvin Technologies

Sylvin™ 4280-60 Natural

Sylvin™ 4280-60 Natural is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Momentive Performance Materials

Tufel™ III 92656

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Sylvin Technologies

Sylvin™ 83094-80UV Black

Sylvin™ 83094-80UV Black is a flexible vinyl compound formulated for outdoor weatherstripping applications. This compound contains a UV additive for improved outdoor weathering.

Sylvin Technologies

Sylvin™ 83060-70LGUV Natural

Sylvin™ 83060-70LGUV Natural is a vinyl compound formulated for extreme weather garden hoses that require UV resistance and a low gloss surface.

Elastocon TPE Technologies

Elastocon® STK56PA-B

Elastocon® STK56PA-B black thermoplastic elastomer has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA-B is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA-B can be overmolded to nylon.Elastocon® STK56PA-B is supplied as ready to use pellets in 1000 lb. quantities.

Wacker Chemie AG

ELASTOSIL® R 401/30 S

ELASTOSIL® R 401/30 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/40 S

ELASTOSIL® R 401/40 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 420/60 S

ELASTOSIL® R 420/60 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/20 OH

ELASTOSIL® R 401/20 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics. ELASTOSIL® R 401/20 OH serves as a low-duro base, offering acceptable to good mechanical properties and good processing properties. It is also suitable as a blending component to soften ELASTOSIL® silicone rubber compounds.

Wacker Chemie AG

ELASTOSIL® R 401/90 OH

ELASTOSIL® R 401/90 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/80 S

ELASTOSIL® R 401/80 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 420/50 S

ELASTOSIL® R 420/50 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/70 S

ELASTOSIL® R 401/70 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/30 OH

ELASTOSIL® R 401/30 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 420/40 S

ELASTOSIL® R 420/40 S is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/60 S

ELASTOSIL® R 401/60 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 401/55 S

ELASTOSIL® R 401/55 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Wacker Chemie AG

ELASTOSIL® R 420/70 S

ELASTOSIL® R 420/70 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

AdvanSix

Aegis® PIR-H85NP

Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Wacker Chemie AG

ELASTOSIL® R 401/50 S

ELASTOSIL® R 401/50 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

Envalior

Arnitel® CM622

Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.

Envalior

Stanyl® TW363

Stanyl® TW363 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. Suitable processing technologies for the product are extrusion and injection molding. Special features include heat stabilization.

Envalior

Arnitel® UM551

Arnitel® UM551 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM551 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. However, it's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM551 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

Envalior

Akulon® F136-DH

Akulon® F136-DH is a polyamide 6 (PA 6) that functions as a resin with distinctive features, including being lightweight, nucleated, and UL flame-rated. It is applied in various industries and markets, including automotive and transportation, electrical and electronics, and industrial sectors.

Envalior

Arnitel® UM552

Arnitel® UM552 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM552 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. It's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM552 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

St. Louis Group

Z-LITE® 3346

Z-LITE® 3346 is a Hindered Amine Light Stabilizer (HALS) designed for enhancing the durability of plastics and elastomers. This product functions as a light stabilizer, suitable for various polymers and resins including acrylonitrile butadiene styrene (ABS), polyamides, polyethylenes (PE), polypropylenes (PP), polyurethanes (PU), polyvinyl chloride (PVC), polystyrenes (PS), and thermoplastic polyurethane (TPU). Z-LITE® 3346 is particularly valuable in applications such as cables, fibers, films, pipes, textile applications, and tubing.

AGC Chemicals Americas, Inc.

Fluon® PTFE G155

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc.

Fluon® PTFE G355

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc.

Fluon® PTFE G350

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc.

Fluon+™ LM-ETFE LH-8000

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc.

Fluon+™ PFA EA-2000

AGC Chemicals Americas, Inc. Fluon+™ PFA EA-2000 is a perfluoro resin which has been functionalized to include an adhesive group within the polymer backbone. The perfluoro backbone gives the material excellent electrical characteristics, and heat and chemical resistance, while the adhesive functionality facilitates adhesion to other materials in a one-step process, without the need for surface treatment or a separate adhesive layer. Example materials include glass cloth, polyimide, or various metals. This grade is semi-commercialized and may be available upon request. This material is supplied as pellets and packaged in 25kg plastic bags.

AGC Chemicals Americas, Inc.

Fluon® PTFE G163

AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.331" +/- 0.014" (8.4+/-.37 MM)

Easy Splice 0.331" +/- 0.014" (8.4 +/- 0.38 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.118"+/-.008_(3.0+/-.21 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ A 60 Durometer, Black O-Ring Cord, Easy Splice 0.393" +/- 0.015" (10.0+/-.39 MM)

Easy Splice 0.393″ +/- 0.015″ (10 +/- 0.58 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 55 Durometer, Black O-Ring Cord, Easy Splice 0.29" +/- 0.013" (7.4 +/- 0.37 MM)

Easy Splice 0.29″ +/- 0.013″ (7.4 +/- 0.37 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.