Industrial

Voelpker Spezialprodukte GmbH

WARADUR® E

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

Polyfill Technologies

Polyfill Technologies Antistatic Masterbatch-PT3002

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibres etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Axel

XTEND® 818+

XTEND® 818+ is good for high production parts with gel coat.It is used or polyester or vinyl ester Good gloss and no pre-release

Clariant

Licowax® E powder

Licowax® E powder is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax® E powder is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU.

Emery Oleochemicals

LOXIOL® P 861 / 3.5

LOXIOL® P 861 / 3.5 is a Pentaerythritol tetra stearate product. LOXIOL® lubricants improve the flow of the polymer melt by reducing the friction of the polymer molecules both to each other and to the surface of the processing machine. The shares of both factors determining the overall friction depend on the compatibility of polymer and lubricant and on the dosage. The differentiation from a release agent is often blurred, as the higher the dosage is, the more lubricant accumulates at the contact area to the processing machine. LOXIOL® release agents improve the injection molding and calendering process by reducing friction and allowing more efficient processing. Our release agents help to minimize cycle times and support continuous production.

McLube

McLube® 1038

McLube® 1038 is a non-transferring, semi-permanent coating with cutting edge additives that make it ideal for epoxy molding and epoxy-bound composite manufacturing. Heat or air-cured.

Axel

MoldWiz® PU-13RX

MoldWiz® PU-13RX - A Liquid mold release agent that is ideally suited for molding polyurethane foam, polymer concrete and other composites molding applications. May be used with FRP or metal molds and is ideal for porous tooling, effectively sealing the surface and contributing to smoother parts. Easier and less time consuming to use and less likely to build up than conventional paste wax release.

Axel

MoldWiz® INT-1850HT

MoldWiz® INT-1850HT - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating

Struktol Company of America, LLC

STRUKTOL® WS 280

STRUKTOL® WS 280 Organosilicone providing maximum heat stability in FKM and FVMQ compounds

Struktol Company of America, LLC

STRUKTOL® WS 180

STRUKTOL® WS 180 Unique silicone chemistry for use with a wide variety of specialty elastomers

Emery Oleochemicals

LOXIOL® G 71 S

LOXIOL® G 71 S is a Complex ester product.LOXIOL® release agents are used for calendering and injection molding of rigid and flexible PVC. They are also used for paste processing, and they can improve the extrusion behavior, since release agents also work as external lubricants. However, external lubricants do not necessarily work as release agents. LOXIOL® release agents migrate to the interface of polymer and processing machine, depending on the particular level of compatibility with the polymer matrix. Often LOXIOL® release agents for PVC are based on complex esters, which are lubricants with a polymeric structure and a high molecular weight.

Emery Oleochemicals

LOXIOL® EP 8578

LOXIOL® EP 8578 is a Pentaerythritol tetra stearate product. LOXIOL® lubricants improve the flow of the polymer melt by reducing the friction of the polymer molecules both to each other and to the surface of the processing machine. The shares of both factors determining the overall friction depend on the compatibility of polymer and lubricant and on the dosage. The differentiation from a release agent is often blurred, as the higher the dosage is, the more lubricant accumulates at the contact area to the processing machine. LOXIOL® release agents improve the injection molding and calendering process by reducing friction and allowing more efficient processing. Our release agents help to minimize cycle times and support continuous production.

Axel

MoldWiz® INT-1890M

MoldWiz® INT-1890M - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating

Stepan Company

DREWPLAST® 154

DREWPLAST® 154 is a nonionic surfactant used as a release agent and anitstat for plastic and films.

McLube

McLube® 1700L

McLube® 1700L is a PTFE dispersion with binding additives offering semi-permanent, non-transferring release characteristics. Ideal for injection molding. Silicone-free. Also, an excellent dry lubricant.

Axel

MoldWiz® 249-B41

MoldWiz® 249-B41 is a liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

Peter Greven Nederland C.V.

LIGAFLUID MG 25/N

Axel

XTEND® 19ZAM

XTEND® 19ZAM - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

Emery Oleochemicals

LOXIOL® G 40

LOXIOL® G 40 is a Fatty acid ester product. LOXIOL® lubricants optimize the processing characteristics of PVC and improve the rheology of the polymer melt by reducing melt viscosity and friction during processing. We offer a wide range of bio-based internal and external lubricants for a variety of applications including calendering, extrusion, and injection molding. LOXIOL® lubricants improve the flow of the polymer melt by reducing the friction of the polymer molecules both to each other and to the surface of the processing machine. The shares of both factors determining the overall friction depend on the compatibility of polymer and lubricant and on the dosage. The differentiation from a release agent is often blurred, as the higher the dosage is, the more lubricant accumulates at the contact area to the processing machine

Axel

MoldWiz® WB-2700

MoldWiz® WB-2700 - A liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

Peter Greven Nederland C.V.

LIGASTAR ZN 101

Emery Oleochemicals

LOXIOL® G 20

LOXIOL® G 20 is a Stearic acid product. LOXIOL® lubricants optimize the processing characteristics of PVC and improve the rheology of the polymer melt by reducing melt viscosity and friction during processing. We offer a wide range of bio-based internal and external lubricants for a variety of applications including calendering, extrusion, and injection molding.

AB Specialty Silicones

Andisil® SF 270

A release agent that in most cases provides a heat-stable film that does not carbonize at temperatures that quickly destroy many organic mold release agents. Effective as a parting agent in die casting aluminum, zinc, magnesium and other metals

Axel

XTEND® 19RSS

XTEND® 19RSS - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

Axel

XTEND® W-3236

XTEND® W-3236 - A semi-permanent, aqueous emulsion, external mold release agent that forms a uniform cured film on drying. Selective adhesion on the mold surface prevents the film from being torn off with de-molding.

McLube

McLube® 857

McLube® 857 is a highly lubricious release emulsion in water. Ideal for epoxy and some polyurethane applications. Cured when dry at room temperature.

Axel

MoldWiz® EM-1212SF2

MoldWiz® EM-1212SF2 - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

ChemPlasa Materials

ChemPlasa Materials L-202P

ChemPlasa Materials L-202P is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

Struktol Company of America, LLC

STRUKTOL® HT 207

STRUKTOL® HT 207 A zinc-free processing aid especially designed for use with silica-filled elastomers. It improves extrusion rate, reduces hysteresis, and reduces mill roll sticking. It has a slight activation effect in sulfur-cured compounds which in some instances is very desirable.

ChemPlasa Materials

ChemPlasa Materials L-101G

ChemPlasa Materials L-101G is Ethylene Bis Oleamide which used as a functional additive in plastics manufacturing.

Struktol Company of America, LLC

Struktol Company of America, LLC Calcium Stearate

Calcium Stearateused by the rubber and plastic industries as an effective elastomer processing aid and release agent. The low chloride content of STRUKTOL® Calcium Stearate allows for complete product dispersion in elastomers. Our "GR" version offers low dust and easy handling.

Axel

MoldWiz® INT-2E-ATS

MoldWiz® INT-2E-ATS - A process aid additive with surfactant properties which is added directly into the aqueous resin solution. The addition of this process aid additive gives the resin improved wetting properties of the paper or substrate being impregnated, reducing or eliminating voids and dry spots. The process aid additive will not interfere with adhesion properties between paper laminates. It will function as an excellent release agent causing the laminate to release easily and cleanly from the caul plate without leaving any residue. This product contains no silicone, no wax and no metallic stearates.

McLube

McLube® 1212

McLube® 1212 is a water-based dispersion of fluoropolymers and proprietary binder technology formulated for effortless release of epoxies and other resins and binders. No cure required. Dilutable.

Axel

MoldWiz® WB-GR50

MoldWiz® WB-GR50 - A water based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part. Will not interfere with any secondary operations such as decorating, bonding, or painting

Slide Products

Slide Products Quick Paintable Mold Release Agent (No. 44712E)

Slide Products Quick Paintable Mold Release Agent (No. 44712E) is a smooth, dry film, drying quickly so you can start molding immediately. Quick Paintable release will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

Struktol Company of America, LLC

Struktol Company of America, LLC MR 187

MR 187 - A silicone free anti-tack agent (liquid, water soluble, mandrel release) and external lubricant for rubber processing. It has been especially designed for EPDM hoses, both peroxide and sulfur cross-linked, but can also be used successfully as a lubricantfor cured rubber articles. It is biodegradable.