products in Technical Fabrics

Sasol

PARAFOL 22-95

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

Sasol

MARLOX MO 154

MARLOX MO 154 is based on a C12-14 fatty alcohol. It can basically be mixed with anionic, nonionic, and cationic surfactants.

AdvanSix

Aegis® H100ZP

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® H100NP

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Orion Engineered Carbons

HIBLACK® 40B2

HIBLACK® 40B2 is a general purpose conductive carbon black suitable for polyolefins and other thermoplastic materials. It is also suitable in rubber compounds.

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

PT Asahimas Chemical (ASC)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH) is an essential raw material and process chemical in many industrial operations. ASC delivers Caustic Soda in 48% solution (Liquid Caustic Soda) and in solid form (Flake Caustic Soda, 98%).

Esenttia

ESENTTIA® 25H35-SB

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Esenttia

ESENTTIA® 35H35

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

AdvanSix

Aegis® H95ZI

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Sanyo Chemical America Incorporated

SANPRENE LQ 336N

SANPRENE LQ-336N is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Petkim

Petkim PETOPLEN EH341

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Subh Chem

Optical Brightener OB-1

Optical Brightener OB-1 is a high molecular weight fluorescent whitening agent, which significantly improves the whiteness in both textile fibers and plastics. Brightener OB-1 produces very brilliant white with light reddish Blue effect which compensate for yellowing. It has good light fastness. Because of its exceptional whitening properties, excellent resistance to heat, low volatility and easy dispersibility, Optical Brightener OB-1 is now widely used in plastic market. It has good compatibility in various substrates; in combination with dyes, it produces bright shades. Brightener OB-1 is used in polymer fibers especially polyester and polyamide fibers. It is also widely used in PP, ABS, PS, HIPS, PA, PC, EVA, Rigid PVC etc.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Daikin Industries, Ltd.

Polyflon PTFE D-210C

Polyflon PTFE D-210C, a liquid product, functions as a filler and binder with compatibility with glass fibers. With anti-drip and opalescence features, it targets markets in electrical, electronics, and industrial applications. Its applications include serving as a battery binder and being employed in textile manufacturing processes such as glass cloth impregnation.

Molgroup Chemicals

TATREN HT 3 06

TATREN HT 3 06 is a homopolymer of good processing stability and it can be processed at high throughput. Additive package of this grade provides low water carry over during production of tapes. TATREN HT 3 06 is characterized by exceptionally high mechanical properties and high stiffness.

Esenttia

ESENTTIA® 03H82

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Michelman

Michem® Lube 156

Michem® Lube 156 - A wax emulsion provides scratch resistance, lubricity, release, and anti-block properties in auto polishes, cosmetics, paints, coatings, and graphic arts.

Esenttia

ESENTTIA® 05H82-AV

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Dynasol Elastomers

Paracril™ OZOM50

Paracril OZOM50 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Petkim

Petkim PETOPLEN EH251

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Polyumac

Polyumac Air-Cell T-60

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Michelman

Michem® Lube 180

Michem® Lube 180 provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistance and water repellence in varnishes and other coatings.

Orion Engineered Carbons

Orion Engineered Carbons SPECIAL BLACK 100

SPECIAL BLACK 100 is an easily dispersed oxidized furnace process carbon black used for masstone in water-based primers. It is preferred as a tinting black with high stability to flooding and floating. Used for radiation curing coatings.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Chomarat

ROVICORE™ R 450/D3/450

ROVICORE™ R 450/D3/450 is a reinforcement comprising a non-woven synthetic 180gsm core and two 450glass mats stitched one on each side of the core.It is used in closed-mold processes.

Sanyo Chemical America Incorporated

SANPRENE LQ X31A

SANPRENE LQ-X31A is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Keeling & Walker

IRASORB BITO

IRASORB BITO, the blue Indium Tin Oxide shows higher electrical conductivity and higher absorption in near infrared light compared to the yellow version, which makes it useful for coatings, inks and polymeric films.

NanoXplore

GrapheneBlack™ 0X

GrapheneBlack™ 0X is NanoXplore's slightly smaller pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

NanoXplore

GrapheneBlack™ 3X

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

Zoltek

ZOLTEK™ PX35 UD600

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

PolyFerm Canada

VersaMer™ PHA

VersaMer™ PHA belongs to the MCL-PHA family and share the same general PHAs structure, with all repeating units containing 6 or more carbons.