products in Military & Defense: Tanks

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICA 20S

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Polyumac

Polyumac Air-Cell T-60

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

CoreLite

BALSASUD® Core Ultra Lite (UL)

Our end-grain balsa wood core material has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). BALSASUD Core is approved by DNV GL and Lloyd's Register.

CoreLite

BALSASUD® Core Standard Grade (SG)

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

CoreLite

BALSASUD® Core Wind Grade (WG)

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

Elliott Company

ELFOAM® P200

ELFOAM® P200 is a 2.0 lb/ft3 (32 kg/m3 ), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

APCM

APCM DA 4518

APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.

Zoltek

ZOLTEK™ PX35 UD600

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

APCM

APCM DA 4080

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Polyumac

Polyumac Air-Cell T-200

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Zoltek

ZOLTEK™ PX35 UD500

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

FIBERTEC INC.

Wollastonite 800S

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

FIBERTEC INC.

MICA 20E

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

CoreLite

BALSASUD® Core Heavy Weight (HW)

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

FIBERTEC INC.

MICROGLASS 9114

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

Wollastonite 905S

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

FIBERTEC INC.

MICROGLASS 9132

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 6616

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROWOOL FLM

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

FIBERTEC INC.

MICA 20U

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

Wollastonite 915S

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Elliott Company

ELFOAM® P400

ELFOAM® P400 is a 4.0 lb/ft3 (64 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

FIBERTEC INC.

Wollastonite 1515U

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

FIBERTEC INC.

Wollastonite 905U

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

FIBERTEC INC.

MICROGLASS 7280

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROWOOL FRM

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

FIBERTEC INC.

MICROGLASS 3032

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

Wollastonite 520U

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.