products in Other Military & Defense Applications

PFI Bearings

METALIZE® ALKYD PRIMER 8-HES-1126

METALIZE® ALKYD PRIMER 8-HES-1126 is a gray heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

Primrose Oil

777 Syn-O-Gen® Grease with Moly-D NLGI Grade No. 2

777 Syn-O-Gen® Grease with Moly-D NLGI Grade No. 2 is a 100% pure synthetic grease for wide-range multi-purpose applications. Wide-range applications include not only wide temperature ranges but also a wide range of performance and environmental applications. Syn-O-Gen’s advantages over mineral oil based greases are unmistakable. Performance, versatility, equipment protection, and cost savings are the hallmarks of this superior grease.

PFI Bearings

METALIZE® ALKYD PRIMER 5-HES-1101

METALIZE® ALKYD PRIMER 5-HES-1101 is a red oxide heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

Mason Color Works

Mason Color Works Cobalt Titanate Green Spinel - 7250 Green 50

Mason Color Works Cobalt Titanate Green Spinel - 7250 Green 50 is a high-performance cobalt titanate based pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military, aerospace and architectural industries. Mason Color 7250 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

CCM gmbh

CCM gmbh 7640 Permanent Protect

CCM gmbh 7640 Permanent Protect is a highly advanced SiO2 coating which was created to address the needs of the marine, military and aerospace sectors. It is massively resistant to corrosion, abrasion and temperature. It can be applied to metal, plastic, powder coated and painted substrates. The coating can be heat cured, or cured at ambient temperature. ALGT© Permanent Protector reacts with the substrates surface and forms an abrasion resistant coating with very high bonding properties on metal. It generates thin, transparent coatings with high impact strength and is resistant to alkali, abrasion and corrosion.

M.M.P

M.M.P MMP-4000

M.M.P MMP-4000 is used in speciality explosives/ refractories.

Sunns Chemical & Mineral

Sunns Chemical & Mineral 3N

Mg Granule is an indispensable nonferrous materials widely used in high scientific and technological fields.

Cantex Coatings Ltd.

Roller/Brush Rubber®

Roller/Brush Rubber® is a uniquely engineered single component asphalt material that has been modified using the highest quality materials known to us. This Safe To Use, Water-Based, Non-Toxic, Free Of Noxious Odors and Free Of V.O.C.s product is available as a hand-applied or as a spray-applied product that meets and or exceeds all parameters set forth by the EPA.

United Resin Corporation

E-CAST Sur-Grip Resin with 282 Hardener

E-CAST Sur-Grip Resin with 282 Hardener is a rubber based epoxy system that exhibits good thermal shock and excellent impact resistance.

Autonomic Materials, Inc.

AMPARMOR® 1000

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

United Resin Corporation

E-CAST Resin with F-28 / 380 Hardener

E-CAST Resin with F-28 / 380 Hardener used general as, 5minute quick setting epoxy for adhesive and patching applications.

Armite Lubricants

Armite Lubricants MIL-PRF-83483

Armite Lubricants MIL-PRF-83483 has excellent lubricity and high load capacity, is particularly suitable for use on aircraft spark plugs and threaded fasteners and fittings at temperatures below 800°F.

PFI Bearings

METAL-CLAD® ALKYD ENAMEL 3-HES-4043

METAL-CLAD® ALKYD ENAMEL 3-HES-4043 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

Primrose Oil

Primrose Oil 513M Armor Plate with Moly-D

Primrose Oil 513M Armor Plate with Moly-D is a multi-grade gear oil that provides excellent lubrication for both the axle and transmission in summer and winter has long been desired by equipment manufacturers. The great success and public acceptance of multi-grade motor oils has emphasized the need for similar viscosity features in gear oils. The viscosity improvers that work so well in motor oils would shear out under the extreme pressures encountered in gears, resulting in severe viscosity loss.

Mason Color Works

Mason Color Works MANGANESE ANTIMONY TITANIUM BUFF RUTILE - 7140 Brown 40

Mason Color Works Manganese Antimony Titanium Buff Rutile - 7140 Brown 40 is an inorganic pigment, is a reaction product of high temperature calcination in which Titanium (IV) oxide, Manganese (II) Oxide, ansd Antimony (V) Oxide in varying amounts are homogeneously and ioncally interdiffused to form a crystalline matrix of rutile.

United Resin Corporation

E-CAST Resin with F-28 / 282 Hardener

E-CAST Resin with F-28 / 282 Hardener is a high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.

Industrial Hard Carbon

Carbon Raptor® DLC Coating

Carbon Raptor® DLC Coating is thin and flexible, but also tough as nails. It’s the perfect combination for high-performance engines as well as Industrial, and medical applications. By reducing friction, we can help extend the lifespan of your product.

Crown Foam Technologies

Crown Foam Technologies EARPLUG FOAM

Crown Foam Technologies Earplug Foam is available with an anti-microbial agent to prevent growth of microorganisms, this effective slow recovery foam is able to be die cut for standard ear plug use. Our 100% Made in the USA earplug foam provides both a comfortable fit and effective noise reduction.

PFI Bearings

METAL-CLAD® ALKYD ENAMEL 8-HES-1722

METAL-CLAD® ALKYD ENAMEL 8-HES-1722 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Offers state-of-the-art corrosion protection with excellent gloss retention, superior durability, and one-coat coverage. May be applied direct to metal without a primer.

Ampac Products

Ampac Products Ammonium Perchlorate

Ampac Products Ammonium Perchlorate is an oxidizer that is primarily used as a key component in solid rocket propellant. It is used in the aerospace, national defense and commercial sectors. American Pacific's production of aerospace-grade AP began more than 50 years ago in Nevada, U.S., utilizing a proprietary process of electrolytic oxidation, crystallization, screening and blending that yields a chromate-free product.

Mason Color Works

Mason Color Works Chrome Manganese Zinc Brown Spinel - 7139 Brown 39

Mason Color Works Chrome Manganese Zinc Brown Spinel - 7139 Brown 39 is an inorganic pigment, is a reaction product of high temperature calcination in which Chromium (III) Oxide, Manganese (II) Oxide and Zinc (II) Oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of spinel. Its composition may include any one or a combination of the modifiers A12O3, NiO, SiO2, SnO2, or TiO2.

Autonomic Materials, Inc.

AMPARMOR® 3000

The AMPARMOR® 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems.

Reltek

BONDiT™ B-4811

BONDiT™ B-4811 is a two-part, state-of-the-art 100% solids, room temperature curing rigid epoxy resin system, especially designed for potting, coating, and adhesive applications for electronics and electrical assemblies, environmental sealing, coating for corrosion resistance, bonding engineering plastics and elastomers to various substrates.

Kingscote Chemicals

Bright Dyes® FLT Yellow/Green Wax (Cake)

Bright Dyes® FLT Yellow/Green Wax (Cake) is specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection material and has been used for labeling studies from the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears yellow/green, depending on its concentration and under UV light as lime green. It is best for visual inspections of moderate volumes of water, 20,000-50,000 gallons.

PFI Bearings

METALIZE® ALKYD PRIMER 2-HES-1757

METALIZE® ALKYD PRIMER 2-HES-1757 is white a heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

Everlube Products

EVERLUBE® 9005

Everlube® 9005 is a MoS2 based solid film lubricant with an epoxy binder system. Everlube® 9005 is Lead & Antimony free.

Industrial Hard Carbon

Casidiam®

Casidiam® by IHC is the latest addition to our DLC coatings portfolio. Casidiam’s® extremely hard base layer increases the load-carrying capacity and scratch-resistance of its tribologically effective DLC top layer even further, making it the perfect coating for applications where extreme contact pressures along with sliding velocities are present.

Guild Associates

Guild Associates 3X Catalyst

Guild Associates 3X Catalyst is catalyst capable of destroying heteroatom containing chemical agents without loss of reactivity. Catalyst suited for both stockpile and non-stockpile demilitarization applications, and chemical defense applications.

PFI Bearings

METALIZE® ALKYD PRIMER 8-HES-1116

METALIZE® ALKYD PRIMER 8-HES-1116 is a black heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

Hummel Croton

Hummel Croton Barium Peroxide

Hummel Croton Barium Peroxide is use as an oxidizer in various ordnance and pyrotechnic mixtures. It is also used to bleach animal substances, vegetable fibers and straw. It can also be used in the manufacturing of oxygen and hydrogen peroxide. Combine with aluminum it is used in the welding industry. It can be used as an oxidizer in organic synthesis.

Prasol Chemicals

Prasol Chemicals DITALLOW DIMETHYL AMMONIUM CHLORIDE (DTDMAC)

Prasol Chemicals DITALLOW DIMETHYL AMMONIUM CHLORIDE (DTDMAC) is used as antistatic agent, textile scouring agent,ingredient for low irritation shampoo, liquid detergent, foam boosters, Corrosion inhibitors and asphalt emulsifier, Dispersants, lubricants, water treatment agents.

Sentinel Canada

Sentinel Canada Sent-46150

Sentinel CanadaSENT-46150 is a light tan color synthetic based semi-fluid grease with a lithium stearate thickener. It is a fortified blend of high performance additives providing antioxidation, anticorrosion, antirust and antiwear properties. The extra PTFE added to the product makes it extremely abrasion resistant and adaptable to the harshest environments. SENT-46150 may also be considered for used in worm drive and planetary gearboxes operating in extreme cold or harsh environments.

CDTi Advanced Materials

PLATINUM PLUS® DFX-DPF

Platinum Plus® DFX-DPF is a technologically advanced fuel additive specifically formulated to improve operation and reduce maintenance of diesel applications with Diesel Particulate Filter (DPF) emissions control systems. Platinum Plus® DFX-DPF is a liquid bimetallic platinum and cerium catalyst formulation soluble and stable in traditional diesel fuel and bio-diesel fuel.

PFI Bearings

METALIZE® UNIVERSAL PRIMER 8-PP-5181

METALIZE® UNIVERSAL PRIMER 8-PP-5181 is a high performance, heavy duty primer offering outstanding corrosion protection for steel and fabricated metal products. This universal primer may be used under urethanes, epoxies, and other high performance topcoats, and also functions as a barrier coat over conventional coatings which are susceptible to strong solvents. It is used as airless or conventional spray

General Plastics Corporation

Gencote 519® FEP

Gencote 519 ® FEP is a tetrafluoroethylene/hexafluoropropylene copolymer. Gencote-519-FEP is chemically inert due to its complete fluorination. This, together with the high temperature, Gencote-519-S has a temperature range of up to 390°F and nonstick properties. FEP is an excellent universal coating for harsh chemical service.

Plascore

Plascore Aramid Fiber PN1-1/8-6.0-OV

Plascore Aramid Fiber PN1-1/8-6.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.