Military & Defense

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Albemarle Corp

Ethacure® 100-LC

Ethacure® 100-LC is a low-color curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.

Arlon Electronic Materials

Arlon® 85HP

Arlon 85HP’s unique blend of pure polyimide resin and micro-fi ne proprietary fi llers results in superior performance for demanding applications. Compared to conventional polyimide systems, 85HP has a lower Z-axis expansion and twice the thermal conductivity. 85HP reduces resin cracking and wicking in designs with high density plated through holes and vias. 85HP prepreg has resin fl ow characteristics and pressed thickness matching standard polyimides.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Barrday

Barrday Thermoplastic Systems

Lightweight, cost competitive and ballistically superior, Barrday’s thermoplastic resin based products can be molded into complex 3D shapes and reshaped using high temperatures. Their excellent ballistics properties make thermoplastics ideal for a wide range of applications including stab resistant materials and composite armors. Ballistic panels made using these resins can be used as either as stand-alone structures or in combination with steel or ceramic in personal or vehicle armor.

Arlon Electronic Materials

Arlon® 55NT

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

FIBERTEC INC.

MICA 20S

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Polyumac

Polyumac Air-Cell T-60

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

CoreLite

BALSASUD® Core Ultra Lite (UL)

Our end-grain balsa wood core material has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). BALSASUD Core is approved by DNV GL and Lloyd's Register.

CoreLite

BALSASUD® Core Standard Grade (SG)

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

CoreLite

BALSASUD® Core Wind Grade (WG)

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

Elliott Company

ELFOAM® P200

ELFOAM® P200 is a 2.0 lb/ft3 (32 kg/m3 ), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Miller-Stephenson Chemical

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings is a non-flammable, solvent-based, one-component polyurethane conformal coating provided in the convenience of aerosol. Our coating provides excellent electrical and barrier properties in a thinfilm applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-470C will maintain its properties even after long exposure to the elements with minimal color change.

Hybrid Plastics

Hybrid Plastics CORIN

Hybrid Plastics CORIN is a colorless, clear, organic/inorganic sprayable nanocomposite that is resistant to radiation and atomic oxygen erosion. CORIN XLS Polyimide is ideal for use in national security applications, such as satellites, and also in solar panels and lightemitting organic displays. CORIN XLS Polyimide combines polyimide and nanocomposite technologies to deliver unsurpassed levels of optical clarity and oxidative stability, as well as stability to solar radiation. This fluorinated polyimide nanocomposite offers the highest atomic oxygen (AO) durability as well as the highest light transmission of all the CORIN grades, making it an ideal lightweight substitute material for glass used in space polyvoltaic (PV) arrays in low earth orbit (LEO).

Barrday

Barrday Epoxy Systems

Epoxy resins are a family of thermosets that offer a broad variety of performance characteristics. Epoxies are well known for their strength, toughness and their ability to be formulated to cure under a wide variety of time and temperature conditions. Epoxy prepregs are structural materials that are used in a wide variety of applications in the composites industry. In protective applications they can provide structural support to strengthen and stiffen soft armor structures as well as to reinforce ceramic plates to provide multi-hit resistance to armor piercing rounds.

Zoltek

ZOLTEK™ PX35 UD600

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Zoltek

ZOLTEK™ PX35 UD500

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Hapco Inc.

Sympoxy™ 1225FR-CA561

SYMPOXY 1225FR-CA561 is a filled, two component epoxy system that is pigmented black.

DowAksa

AKSACA™ AC 0101 CHOPPED FIBER

AKSACA™ AC 0101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

APCM

APCM DA 4080

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Barrday

Barrday Phenolic Systems

Phenolic resins are renowned for their excellent high temperature resistance, flame resistance, low smoke generation and low toxicity in fire situations. Phenolics are used in vehicle armor applications that utilize these properties in combination with E-glass and other high performance glass fibers. Phenolics are very rigid, although toughened versions are available with reduced temperature resistance.

APCM

APCM DA 4518

APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.

DowAksa

AKSACA™ 12K A-42

AKSACA™ 12K A-42 is a High Quality Carbon Fiber.

Polyumac

Polyumac Air-Cell T-200

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

MITO Material Solutions

MITO® E-GO™

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

MITO Material Solutions

MITO® ACRE™

MITO® ACRE™ is a renewable, sustainable, cornstarch-based additive that can be used to replace non-renewable fillers like mica. Much like MITO® E-GO™, MITO® ACRE™ added to a polymer acts as a scaffold, creating remarkable bonding and adherence. It is easy to use and integrate, with the same reactive dispersion as MITO® E-GO™. For added flexibility, it doesn’t alter the optical properties of polymers and can be processed with pigmentation. Most importantly, the unique structural properties of MITO® ACRE™ greatly improve product performance.https://mitomaterials.com/products/mito-acre

SABIC's Specialties Business

ULTEM™ Resin SF2250

High flow ULTEM for thin wall application

SABIC's Specialties Business

SILTEM™ Resin STM1700

SABIC's Specialties Business SILTEM™ Resin STM1700 is a top-quality, flexible polyetherimide (PEI)-siloxane copolymer designed specifically for wire and cable applications. It offers a halogen-free flame retardant solution according to VDE 0472, as well as low smoke emission and toxicity. This amber-colored, transparent material can be self-colored and easily processed using conventional equipment. It may also be suitable for flexible profiles or injection-molded parts. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 1010R

SABIC's Specialties Business ULTEM™ Resin 1010R is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg of 217°C), improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The material is available in opaque colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business

ULTEM™ Resin 2410

SABIC's Specialties Business 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.