products in Military & Defense

APCM

APCM DA 4092

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Michael Day Enterprises

Michael Day Enterprises AH90

Michael Day Enterprises AH90 is a 18-20 melt flow acetal homopolymer.

Teijin Twaron B.V.

Teijinconex® TF B

Teijinconex® TF B Industrial felt, inner liner of protective clothing.

Isola

Isola FR406N

FR406 No-Flo and FR406 Lo-Flo® products bring the fabricator specific thermal characteristics appropriate for use in heat sink bonding, die cavity board (direct chip attachment) and multilayer rigid-flex applications.

Carr Reinforcements

Carr Reinforcements Carbon UDs DW0164 (Width 1250)

Carbon UDs DW0164 (Width 1250) is made of UD fabric by plain weaving style.

Anhui Wanwei Group

Anhui Wanwei Group Water-soluble PVA fiber First grade

Anhui Wanwei Group Water-soluble PVA fiber First grade is a kind of cotton-like synthetic fiber, which has been widely used in agriculture, light industry, textile, military, medical and other fields in recent years.

Tianxing Biotechnology

Tianxing Biotechnology Dibutyl Sebacate (DBS)

Tianxing Biotechnology Dibutyl Sebacate (DBS) has synonyms called Dibutyl decanedioate, Butyl sebacate, Di-n-butyl sebacate.

Plascore

Plascore Aramid Fiber PN1-1/8-4.0-OV

Plascore Aramid Fiber PN1-1/8-4.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Alpine Advanced Materials

HX5®

HX5® is a proprietary injection moldable carbon fiber filled thermoplastic nanocomposite. It is a high strength-to weight ratio compound that is resistant to a variety of environmental conditions including temperature, corrosive gasses & liquids, and radiation. It is comparable in strength to 6061 aluminum and up to half the weight.

P & P Technology

P & P Technology Silver Aluminium Loaded Fluorosilicone ECF-J

P & P Technology Silver Aluminum Loaded Fluorosilicone ECF-J is a silicone elastomer with a silver / aluminum conductive filler.

Teijin Twaron B.V.

Teijinconex® Dope-dyed fiber

Teijinconex® dope-dyed fiber is a natural cluster of meta-aramid fibers designed to raise the performance levels of protective apparel.

Carr Reinforcements

Carr Reinforcements Carbon Fabrics 38391

Carbon Fabrics 38391 is made of carbon fiber by 2/2 Twill weaving style.

APCM

APCM DA 4518U

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

UFM Bt

UNIFOAM® XPE 33 Dark

UNIFOAM® XPE 33 Dark is made from high-quality polyethylene polymer and additives.

JPS COMPOSITE MATERIALS

Kevlar® KM2+ 767

Kevlar® KM2+ 767 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

PRF Composite Materials

PRF Composite Materials RP542-3

PRF Composite Materials RP542-3 is a winter version of our popular RP542-1 component prepreg, providing a controlled flow, toughened epoxy prepreg system formulated for the manufacture of high performance structural composite parts requiring very good impact strength properties. The system has been formulated for a medium temperature cure of 90 - 120°C under vacuum or autoclave pressure and is also suitable for press molding. Fully cured, this system has a dry service temperature capability up to 120°C. The component surface finish with this system is excellent. The high tack level of this system is ideal for use in cold weather conditions, where temperatures in workshops drop below 15°C. The out life of the system is up to 40 days at 20°C, making this system suitable for the manufacture of large composite components. RP542-3 can be supplied on most of the vast range of PRF reinforcement materials in widths up to 1350 mm wide.

Michael Day Enterprises

Michael Day Enterprises TPV 85A

Michael Day Enterprises TPV 85A is a shore A 85 thermoplastic vulcanizate.

Park Aerospace

Park Aerospace E-722 7781 E-Glass

Park’s E-722 is a modified 350°F cure epoxy system with excellent processing characteristics for vacuum bag, press, and autoclave molding.

UFM Bt

UNIFOAM® XPE 45 Dark

UNIFOAM® XPE 45 Dark is made from high-quality polyethylene polymer and additives.

Globe Composite Solutions, Ltd

Brandonite® 1000-80A

Brandonite® 1000-80A contains features such as Excellent ow temperature flexibility.

Beacon Adhesives

Magna-Tac™ A-39

Magna-Tac™ A-39 is a 100% -solids, two-component, solvent-free, formulated epoxy adhesive in paste form specifically designed for metal-to-metal applications and for bonding other rigid materials such as glass, plastics, wood and structural laminates based on glass or fiber reinforced melamine, silicone, polyester, phenolic, epoxy, etc. resins. This adhesive may be cured at room temperature or at elevated temperatures, depending on manufacturing conditions, properties desired and on service requirements for the finished assembly.

Isola

Isola 370HR

370HR laminates and prepregs, deigned by Polyclad, are made using a patented high performance 180°C Tg FR-4 multifunctional epoxy resin system that is designed for multilayer Printed Wiring Board (PWB) applications where maximum thermal performance and reliability are required. We manufacture 370HR laminates and prepregs with high quality E-glass glass fabric for superior Conductive Anodic Filament (CAF) resistance. 370HR provides superior thermal performance with low Coefficient of Thermal Expansion (CTE) and the mechanical, chemical and moisture resistance properties that equal or exceed the performance of traditional FR-4 materials. 370HR is used in thousands of PWB designs and has proven to be best in class for thermal reliability, CAF performance, ease of processing and proven performance on sequential lamination designs.

United Resin Corporation

United Resin Corporation Epoxy Bond D.G. Resin with 141 Hardener

United Resin Corporation Epoxy Bond D.G. Resin with 141 Hardener is an unfilled epoxy system with a room temperature cure with excellent adhesion to metals, plastics and ceramics.

Three-Sixty Solutions

Solu-Cell P4000

Solu-Cell P4000 is a chemically cross linked polyolefin based foam material.

Starfire Systems

StarPCS™ SBMC-601

StarPCS™ SBMC-601 is a discontinuous carbon fiber reinforced molding compound containing carbon fiber, a vinyl substituted polysiloxane resin, and refractory particulate. SBMC-601 cures at temperatures between 180-250o C and functions as a high temperature carbon fiber reinforced structure with a silicon oxycarbide ceramic. Curing produces a green fiber reinforced composite material. Further processing to 850o C (minimum) in inert gas results in an amorphous silicon oxycarbide matrix ceramic composite that can be used as a pre-form for use with different infiltration polymers or materials. Ideal infiltration polymers include Polyramic® SPR-688 or SPR-212 based slurries (SL-227, SL-480), and other Starfire® Systems polysiloxane products.

Chomarat

A-WEAVE 440P G

A-WEAVE 440P G is a 0°/90° 440 gsm aramid fabric. This reinforcement is used in ballistic applications.

Champion Technologies

Champion Technologies 1177G

Champion Technologies 1177G is a canvas phenolic material infused with graphite that is strong and wear resistant.

UFM Bt

UNIFOAM® XPE 25

UNIFOAM® XPE 25 is made from high-quality polyethylene polymer and additives.

Tianxing Biotechnology

Tianxing Biotechnology 12-Hydroxy Stearic Acid

Tianxing Biotechnology 12-Hydroxy Stearic Acid is a hydroxy fatty acid that is stearic acid bearing a hydroxy substituent at position 12. It acts as a plant metabolite and a bacterial xenobiotic metabolite.

Teijin Twaron B.V.

Teijinconex® HT B

Teijinconex® HT B Sewing thread, mechanical rubber goods (automotive hose, belt).

Carr Reinforcements

Carr Reinforcements Carbon Fabrics 38194 (Width 1250)

Carbon Fabrics 38194 (Width 1250) is made of carbon fiber by 2/2 Twill weaving style.

Vectorply

Vectorply C-QX 1800

C-QX 1800 is a carbon fiber type.

Jushi Group

Jushi Group 702

702 Direct Roving and Assembled Roving is coated with a silane-based sizing. Specially designed for texturizing and weaving of wet processes , it is suitable for use in texturized roving, texturized fiberglass loomstate, fiberglass tape, fiberglass rope and mesh, etc. It is widely used in smelting, power generation, shipbuilding, automobile, oil field filtration and other sealing insulation materials and construction, transportation, chemical, environmental protection, national defense and other thermal insulation materials.

Ultracor

Ultracor UCF-290-1.0-2.0

Ultracor UCF-290-1.0-2.0 is used in structural applications where high mechanical performance is paramount and low density remains a primary concern.

Cecence Limited

Cecence Limited 3K plain x 3P POST PRESS

Cecence Limited 3K plain x 3P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Applied Sciences Inc.

Applied Sciences Inc. PR-24-XT-PS

Applied Sciences Inc. PR-24-XT-PS has an average diameter of about 100 nanometers and has a minimal chemically vapor deposited (CVD) layer of carbon on the surface of the fiber over a graphitic tubular core. It is available in three grades designated as PS, LHT and HHT. The PS grade carbon nanofiber is produced by pyrolytically stripping the as-produced fiber to remove polyaromatic hydrocarbons from the fiber surface.