Enhanced Oil Recovery

Sasol

SOLFODAC AC-3-I

SOLFODAC AC-3-I is the sulphonic acid of ISORCHEM 113 linear alkyl benzene. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ALFOTERRA 145-8S 90

ALFOTERRA 145-8S 90 is the sodium salt of ISALCHEM 145 fatty alcohol propoxy-sulfate with about 85% active matter. These surfactants are sodium salts of alcohol propoxy sulfates supplied as a ca 90% anionic active solution. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Kraton

SYLFAT™ 2LT

SYLFAT 2LT Tall Oil Fatty Acid (TOFA) is refined from selected crude tall oil grades aimed to achieve a low temperature performance, under carefully controlled process conditions and extended analysis for consistent quality. The utility of SYLFAT 2LT can be found in the long carbon chain (C18), acid function of the carboxyl group (COOH), unsaturation of the double bonds and consistently low cloud point and pour point. SYLFAT 2LT is developed for applications requiring low temperature properties.

Sasol

SOLFODAC AC-3-H

SOLFODAC AC-3-H is the sulphonic acid of HYBLENE 113 linear alkyl benzene. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

NOVEL EL-40 Ethoxylate

NOVEL EL-40 Ethoxylate is a castor oil Ethoxylate with an average of 40 EO moles. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

NOVEL 810-4.5 Ethoxylate

NOVEL 810-4.5 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 810 Alcohol. This 4.5-mole ethoxylate is made using Sasol Chemicals patented NOVEL catalyst technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL 810-4.5 Ethoxylate is liquid at room temperature, essentially 100% active. For documents/ applications specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

Sasol 154L Specialty Alkylate

Sasol 154L Specialty Alkylate is synthetically derived oil which is produced as a co-product during the manufacture of Linear Alkyl Benzene (LAB). For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

NOVEL 810-3.5 Ethoxylate

Sasol Chemicals NOVEL 810-3.5 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 810 Alcohol. This 3.5-mole Ethoxylate is made using Sasol Chemicals patented NOVEL catalyst technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL 810-3.5 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)3.5OH where 'x' varies between 7 and 9. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

NOVEL 810-2 Ethoxylate

Sasol Chemicals NOVEL 810-2 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 810 Alcohol. This 2-mole Ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL 810-2 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)2OH where 'x' varies between 7 and 9. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ALFONIC 1012-5 Ethoxylate

Sasol Chemicals ALFONIC 1012-5 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL1012 Alcohol. ALFONIC 1012-5 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)5OH where 'x' varies between 9 and 11. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ALFONIC 1012-6 Ethoxylate

Sasol Chemicals ALFONIC 1012-6 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 1012 Alcohol. ALFONIC 1012-6 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)6OH where 'x' varies between 9 and 11. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ALFONIC 1012-3 Ethoxylate

Sasol Chemicals ALFONIC 1012-3 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL1012 Alcohol. ALFONIC 1012-3 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)3OH where 'x' varies between 9 and 11. For documents specific to a region, please contact Sasol using the 'Request Document' button.

BTC Europe GmbH

Portil® A

Stepan Company

BTC® 85-RT

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

Cepsa Chemicals

RECOLAS 147

RECOLAS 147 is an Enhanced Oil Recovery (EOR) surfactant produced and commercialized by Cepsa. It is specifically formulated as a C14-C17 linear alkylbenzene sodium sulfonate to achieve an ultra-low interfacial tension (IFT) in ASP (Alkaline Surfactant Polymer) and SP (Surfactant Polymer) methods. RECOLAS 147 is typically used in conjunction with co-surfactants or co-solvents in formulations to enhance its effectiveness.

Cepsa Chemicals

RECOLAS 103

RECOLAS 103 is an Enhanced Oil Recovery (EOR) surfactant manufactured and commercialized by Cepsa. It is specifically formulated as a C10-C13 linear alkylbenzene sodium sulfonate to achieve an ultra-low interfacial tension (IFT) in ASP (Alkaline Surfactant Polymer) and SP (Surfactant Polymer) methods. RECOLAS 103 is typically used in combination with co-surfactants or co-solvents in formulations to enhance its effectiveness.

Cepsa Chemicals

RECODAS 185

RECODAS 185 is an Enhanced Oil Recovery (EOR) surfactant manufactured and commercialized by Cepsa. It primarily consists of dialkylbenzene sodium sulfonates and is specifically formulated to achieve an ultra-low interfacial tension (IFT) in ASP (Alkaline Surfactant Polymer) and SP (Surfactant Polymer) methods. RECODAS 185 is typically used alongside co-surfactants or co-solvents in formulations to enhance its performance.

Cepsa Chemicals

RECOLAS 158

RECOLAS 158 is an Enhanced Oil Recovery (EOR) surfactant produced and commercialized by Cepsa. It is specifically formulated as a C14-C17 linear alkylbenzene sodium sulfonate to achieve an ultra-low interfacial tension (IFT) in ASP (Alkaline Surfactant Polymer) and SP (Surfactant Polymer) methods. RECOLAS 158 is typically used in combination with co-surfactants or co-solvents in formulations to enhance its effectiveness.

Sasol

NOVEL 610-3.5 Ethoxylate

Sasol Chemicals NOVEL 610-3.5 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 610 Alcohol. This 3.5-mole Ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL 610-3.5 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)3.5OH where 'x' varies between 5 and 9. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ALFONIC 610-3.5 Ethoxylate

ALFONIC 610-3.5 Alcohol Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 610 Alcohol. ALFONIC 610-3.5 Ethoxylate is a clear, colorless liquid. Because of its degree of ethoxylation, it is soluble in polar solvents such as water, ethanol, isopropanol and glycol ethers. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Envalior

Stanyl® TW271F6

DSM Engineering Materials Stanyl® TW271F6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.

Envalior

Xytron™ G4010T

DSM Engineering Materials Xytron™ G4010T is a high-performance plastic compound developed by DSM Engineering Plastics. It is based on PPS (polyphenylene sulfide). This material is known for its exceptional chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. These outstanding properties make Xytron™ G4010T well-suited for a wide range of applications. The material is typically processed using injection molding technology. Notable features of Xytron™ G4010T include 40% glass reinforcement for increased strength, flame retardant properties, and improved flow during processing.

Envalior

Xytron™ G4010W

DSM Engineering Materials Xytron™ G4010W is a high-performance plastic compound from DSM Engineering Plastics that is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. A suitable processing technology for the product is injection molding. Special features include wear and friction modification.

Envalior

Xytron™ G4024T

DSM Engineering Materials Xytron™ G4024T is a high-performance plastic compound from DSM Engineering Plastics that is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. A suitable processing technology for the product is injection molding.

Nease Co.

Naxan® DIA

Naxan® DIA is the acid version of Naxan® DIL and Naxan® DI-AN products. It is used in oil field applications. This emulsion breaker product is used in enhanced oil recovery systems to resolve emulsions caused during the extraction and processing of crude oil.

Nease Co.

Naxan® DIL

Naxan® DIL is a unique product in our offering, being the lightest in color and having a low odor, very fast wetting, and good hydrotropic properties. It is also the most hydrophobic product in our line, which is an advantage in formulations requiring "rinse off" functionality, as well as allowing for better color management in the end product when low color is essential.

Tramfloc, Inc.

Tramfloc® 865A Coagulant and Demulsifier

Tramfloc® 865A consists of 50% polyamine product with NSF® standard 60 approval. Tramfloc® 865A has proven efficacy in resolving oil in water and inverse emulsions. This formulation is also useful in separating fines in potable water, lime softening, dye and ink production, food processing, drilling fluids’ resolution and bio-pharma streams.

Polygel Group

Polygel Group ENZYME – GUAR

Enzyme - Guar is a special enzymatic formulation to extract crude oil by means of Poly-Biogel hydrolysis.

Tramfloc, Inc.

Tramfloc® 876 Coagulant and Demulsifier

Tramfloc® 876 is a tannin based amine solution. Tramfloc® 876 has proven efficacy in resolving oil in water emulsions. This formulation is also useful in separating fines from water, lime softening, dye and ink production, food waste processing, and vegetable oil emulsion breaking. Tramfloc® 876 is NSF® standard 60 approved to treat potable water.

Tramfloc, Inc.

Tramfloc® 867

Tramfloc, Inc.

Tramfloc® 866A Coagulant and Demulsifier

Tramfloc, Inc.

Tramfloc® 864A Coagulant and Demulsifier

Tramfloc® 864A consists of 50% polyamine product with NSF® standard 60 approval. Tramfloc® 864A has proven efficacy in resolving oil in water and inverse emulsions. This formulation is also useful in separating fines in potable water, lime softening, dye and ink production, food processing, drilling fluids’ resolution and bio-pharma streams.

Fluorocarbon Company

FLUORONOID® FL 381

FLUORONOID® FL 381 is a Acetal – POM Copolymer

Borica

TYTAN™ TNPZ

TYTAN™ TNPZ is Improved corrosion resistance.

Guide Energy Solutions

Axi™ Surf

Axi™ Surf is a Surfactant additive designed to prevent emulsions and increase hydrocarbon flowback.

Guide Energy Solutions

Axi™ Treat

Axi™ Treat is a Biocide additive that is used to treat fluids and prevent bacteria growth.