products in Oil, Gas & Mining: Molding Compound

Quantum Composites

Lytex® 9063-E

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

Polynt Group

Polynt Group SMC LS 3800 R25 RF C NERO

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Quantum Composites

Lytex® 4149

Lytex® 4149 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

Polynt Group

RECarbon® 90CFP40-400gr

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

Polynt Group BMC LS 388/20 C GRIGIO

Polynt Group BMC LS 388/20 C Grigio is generally used in industrial sector applications.

Quantum Composites

AMC® 2593

AMC® 2593 is a chopped carbon fiber reinforced ESC® phenolic molding compound. It is easily moldable and provides parts that are high strength, with high heat resistance, low density and it exhibits low flammability characteristics. The carbon fiber is standard modulus PAN based 3K tow.

Quantum Composites

HTC™ 9593

HTC™ 9593 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

Plastics Engineering Company

Plastics Engineering Company 06404 Two-Stage Phenolic

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plastics Engineering Company

Plastics Engineering Company 06343 Two-Stage Phenolic

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Plastics Engineering Company

Plastics Engineering Company 06301 Two-Stage Phenolic

Plenco® 06301 is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. 06301 is available in black.

Plastics Engineering Company

Plastics Engineering Company 06310 Two-Stage Phenolic

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

Plastics Engineering Company

Plastics Engineering Company 06582 Two-Stage Phenolic

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Plastics Engineering Company

Plastics Engineering Company 06553 Two-Stage Phenolic

Plenco® 06553 is a mineral and glass fiber reinforced two-stage phenolic molding compound, formulated for dimensional stability, good chemical resistance to brake fluids, such as DOT 3 and 4, and should provide grinding to close tolerances. 06553 is UL recognized under component file E40654. 06553 is available in black. 06553 was qualified under military specification MIL-M 14 (superseded by ASTM D-5948) TYPE MFH and batches can, if requested and paid for, be tested for certification to the standard.

Plastics Engineering Company

Plastics Engineering Company 06500 Two-Stage Phenolic

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

Plastics Engineering Company

Plastics Engineering Company 06401 Two-stage Phenolic

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Polynt Group

SMCarbon® 26CF50-12K

SMCarbon® 26CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

Polynt Group BMC 700-23 VE C

Polynt Group BMC 700-23 VE C is a bulk molding compound based on vinylester resin and reinforced with glass fibers. BMC 700-23 VE C joint good mechanical properties and high chemical resistance. This BMC has been developed for application where is requested anti-static protection. BMC 700-23 VE C is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

Polynt Group BMC RF 18 VE

Polynt Group BMC RF 18 VE is a bulk molding compound based on a vinylester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC RF 18 ve.. BMC RF 18 VE is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

SMCarbon® 90CF50-12K

SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group

SMCarbon® 80CF40-12K

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

SMCarbon® 24CF50-12K/2

SMCarbon® 24CF50-12K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group

Polynt Group BMC RF A 100/18

Polynt Group BMC RF A 100/18 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade reinforced with glass fibers. This BMC has been developed for electrical application where high chemical resistance is request. Good mechanical properties and good fire protection grade are combined into the BMC RF a 100/18 BMC RF a 100/18 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

RECarbon® 24CF40-400gr

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Quantum Composites

Lytex® 4181

Lytex® 4181 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

Polynt Group

SMCarbon® 80CF60-3K/2

SMCarbon® 80CF60-3K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group

SMCarbon® 24CF60-12K

SMCarbon® 24CF60-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

RECarbon® 24CFP40-400gr

RECarbon® 24CFP40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

SMCarbon® 80CF50-12K

SMCarbon® 80CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

SMCarbon® 90CF60-3K

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group

SMCarbon® 24CF50-50K

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Quantum Composites

Quantum Composites QC-2150LD

Quantum Composites QC-2150LD is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.

Polynt Group

Polynt Group SMC LS 3200 R40

Polynt Group SMC LS 3200 R40 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R40 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R40 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

Polynt Group BMC 396 FC

Polynt Group BMC 396 FC is a bulk molding compound based on an unsaturated polyester resin. BMC 396 FC is conductive compound, has been developed to produce the bipolar plate for the hydrogen battery. BMC 396 FC is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

Polynt Group HUP 23/20 RN-Color

Polynt Group HUP 23/20 RN-Color is generally used in industrial sector applications.

Polynt Group

RECarbon® 90CF40-400gr

RECarbon® 90CF40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

Polynt Group HUP 10/57 RB

Polynt Group HUP 10/57 RB is generally used in industrial sector applications.