products in Oil, Gas & Mining: Reinforcement

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Hexcel

HexTow® AS4

HexTow® AS4 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS4-GP 3k (1%), AS4-GP 12k (0.9%), and AS4 12k carbon fibers have been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.

3B Fibreglass

3B Fibreglass 399 Direct Rovings

3B Fiberglass 399 Direct Rovings consist of continuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding.Corrosion resistant 399 Direct Rovings made of Advantex® glassare specifically designed for pultrusion process and are compatible with thermosets resins. They are the materials of choice for the manufacturing of high quality profiles. 399 Direct Rovings made of Advantex® glass are also used in filament winding process under specific conditions; contact us for further assistance.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Hexcel

HexTow® IM2A

HexTow® IM2A carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM2A fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® IM2A is International Monohull Open Class Association (IMOCA) certified/qualified.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICA 20S

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

3B Fibreglass

3B Fibreglass MF 01 ER

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Hexcel

HexTow® IM7

HexTow® IM7 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM7 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. IM7-G 12K (0.25%) carbon fiber has been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.

Hexcel

HexTow® IM2C

HexTow® IM2C carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM2C fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® IM2C is International Monohull Open Class Association (IMOCA) certified/qualified.

Zoltek

ZOLTEK™ PX35 VINYL ESTER COMPATIBLE TOW

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

Hexcel

HexTow® IM6

HexTow® IM6 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM6 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Zoltek

ZOLTEK™ PX35 P/TW28-50

ZOLTEK PX35 Tow Weave Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Quick composite part build-up is cost effectively achieved with our cosmetically attractive carbon fiber fabrics. Applications include large composite tooling parts and esthetically appealing finished composite components.

Zoltek

ZOLTEK™ PX35 MILLED CARBON FIBERS

ZOLTEK’s PX35 Milled Fibers are specifically processed PAN (polyacrylonitrile) based fibers for lower cost applications. ZOLTEK PX30 High Purity Milled Fibers are 99+% pure carbon fibers derived from ZOLTEK’s high temperature batch graphitization process. All ZOLTEK milled products are free of any sizings. ZOLTEK’s in-house milling system ensures product quality and traceability from raw material through finished product.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

3B Fibreglass

3B Fibreglass W 2020

3B Fiberglass W 2020 are spe-cifically designed to provide signifi-cantly higher modulus, strength and enhanced fatigue performances ver-sus traditional E-glass for wind turbine blades made out of epoxy resin. HiPer-texTM W 2020 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics and prepregs. The sizing W 2020 is purposely formulated for excellent adhesion with epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore. The W 2020 roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades.

Zoltek

ZOLTEK™ PX35 CHOPPED FIBER (TYPE-13)

ZOLTEK’s PX35 Flake Type chopped fibers provide ready impregnation of thermoset resins, with the capability to mold complex shapes. The resultant carbon fiber/ resin matrix composites offer high strength-to-weight and stiffness-to-weight ratios. Zoltek PX35 Flake Type chopped fibers may also be used as a low-cost alternative in thermoplastic applications, whereby a small portion of the matrix-specific product can be replaced with chopped flake carbon fibers with negligible impact to composite properties.

Hexcel

HexTow® HM50

HexTow® HM50 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion. Data and information shown are preliminary

3B Fibreglass

3B Fibreglass SE 3030

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

Zoltek

ZOLTEK™ PX35 UD600

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

3B Fibreglass

3B Fibreglass EM 1011

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

Taishan Fiberglass

Taishan Fiberglass T940H

Taishan Fiberglass T940H, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

3B Fibreglass

3B Fibreglass SE 4220

3B Fiberglass SE 4220 are corresponds to 3B’s portfolio of direct roving glassfi bre designed to rein-force polyolefi ns. Made out of E-CR glass, these direct roving fi bres consist of conti-nuous fi laments bonded together into a single strand and wound into a cylindrical shaped bobbin. SE 4220 (17μm) corresponds to an E-CR glass made direct roving whose strand consists of gathered 17μm diameter glass fi laments for reinforcing polyolefi ns. This 17μm fi lament diameter product offers the best compromise between mechanical performances and aptitude for knitting/weaving in the case of Continuous Fiber Thermoplastics manu-facturing. This is also the most common fi lament diameter in use for the production of LFT pellets or D-LFT parts. SE 4220 (17μm) is compatible with both polyethylene (PE) and polypropylene (PP).SE 4220 (17μm) direct roving is internal/inside pull and is available in 1200 tex and 2400 tex linear densities.

Hexcel

HexTow® IM10

HexTow® IM10 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM10 fiber, such as the highest commercially available tensile strength, intermediate modulus, and good shear strength allow structural designers to achieve higher safety margins for both stiffness and strength critical applications

Zoltek

ZOLTEK™ PX35 CHOPPED FIBER (TYPE-48)

ZOLTEK’s Type-48 chopped fibers provide excellent mechanical and electrical properties for reinforcement in thermoplastic molding compounds requiring high strength and modulus, low density, electrical conductivity, dimensional stability, low thermal expansion and excellent friction/wear properties.

Zoltek

ZOLTEK™ PX35 CHOPPED FIBER (TYPE-65)

ZOLTEK’s Type-65 chopped fiber format has high bulk density values which allow for cleaner and more consistent flow rates and maintains its integrity from the package, into, and through the hopper and distributes easily during compounding, improving process and product performance and has excellent mechanical and electrical properties.

Zoltek

ZOLTEK™ PX35 UD500

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

FIBERTEC INC.

MICROGLASS 6616

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROWOOL FLM

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

FIBERTEC INC.

MICA 20E

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

Wollastonite 905S

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

FIBERTEC INC.

MICROGLASS 9114

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 9132

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.