products in Oil, Gas & Mining: O Rings

Precision Polymer Engineering

Precision Polymer™ Z85L

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

Dynasol Elastomers

Paracril™ CLT

Paracril CLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Dynasol Elastomers

Paracril™ CJLT

Paracril CJLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Precision Polymer Engineering

Perlast® G92E

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

Precision Polymer Engineering

Perlast® ICE G75LT

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

Dynasol Elastomers

Paracril™ BJLT-M30

Paracril BJLTM30 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.236" +/- 0.013" (6 +/- 0.34 MM)

Easy Splice 0.236" +/- 0.013" (6 +/- 0.34 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 60 Durometer, Black O-Ring Cord, Easy Splice 0.25" +/- 0.013" (6.4+/-.39 MM)

Easy Splice 0.25″ +/- 0.013″ (6.4 +/- 0.38 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

3M™ Dyneon 75 Durometer, Brown FKM O-Ring Cord, Easy Splice 0.118" +/- .008" (3.0+/-.21 MM)

0.118"+/- .008_(3.00+/-.21 MM) 75 D_BRN_FKM_O-RING CORD

Eagle Elastomer

Viton™ GLT-S 75 Durometer, Fluoroelastomer Compound EE94476H

75 durometer black Viton™ GLTS fluoroelastomer compound

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.139"+/-.008"_(3.5+/-.24 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ A 55 Durometer, Black O-Ring Cord, Easy Splice 0.331" +/- 0.014" (8.4 +/- 0.37 MM)

Easy Splice 0.331″ +/- 0.014″ (8.4 +/- 0.37 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Fluoroelastomer Sheet EE96174F

75 Durometer black Viton A FDA fluoroelastomer compound

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.530" +/- .020" (13.5+/-.55 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ GFS 75 Durometer, Black O-Ring Cord, Easy Splice 0.275"_+/-.011_(7.0+/-.30 MM)

75 Durometer - Black Viton GF-S O-Ring Cord

Eagle Elastomer

3M™ Dyneon 75 Durometer, Brown FKM O-Ring Cord, Easy Splice 0.125" +/- .009" (3.2+/-.26 MM)

0.125"+/-.009_(3.18+/-.23 MM) 75 D_BRN_FKM_O-RING CORD

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.295" +/- .010" (7.5+/-.27 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.125"+/-.008_(3.2+/-.23 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.139" +/- .006" (3.5+/-.19 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ GLT-S 75 Durometer, Black O-Ring Cord, Easy Splice 0.375"+/-.013_(9.5+/-.36 MM)

75 Durometer - Black Viton GLT-S O-Ring Cord

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 1.125" +/- .050" (28.6 +/- 1.27 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.275" +/- .010" (7.0+/-.27 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.125" +/- 0.009" (3.2 +/- 0.26 MM)

Easy Splice 0.125" +/- 0.009" (3.2 +/- 0.26 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 90 Durometer, Black O-Ring Cord, Easy Splice 0.750" +/- .030" (19.1+/-.82 MM)

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.098" +/- .005" (2.5 +/- .14 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.472" +/- 0.026" (12.0+/-.69 MM)

Easy Splice 0.472" +/- 0.026" (12 +/- 0.68 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 60 Durometer, Black O-Ring Cord, Easy Splice 0.375" +/- 0.014" (9.5+/-.39 MM)

Easy Splice 0.375″ +/- 0.014″ (9.5 +/- 0.38 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

3M™ Dyneon 75 Durometer, Brown FKM O-Ring Cord, Easy Splice 0.295" +/- .014" (7.5+/-.37 MM)

0.295"+/-.014_(7.49+/-.36 MM) 75 D_BRN_FKM_O-RING CORD

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.562" +/- 0.028" (14.3 +/- 0.74 MM)

Easy Splice 0.562" +/- 0.028" (14.3 +/- 0.74 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Daikin Industries, Ltd.

DAI-EL GBR-6005

DAI-EL GBR-6005 is a solid product with features like good processability and resistance to alkali and steam. Targeting industrial markets, it caters to applications in oil, gas, and mining exploration and upstream. Utilizing a chemical cure method, it is suitable for O rings and turbocharger hoses.

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.250"+/-.013_(6.4+/-.39 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.750" +/- .030" (19.1+/-.82 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Black Quad Cord, Easy Splice 0.250" +/- .010" X .196" +/- .010" (6.4 +/- .30MM) X (5.0 +/- .27MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 90 Durometer, Black O-Ring Cord, Easy Splice 0.472" +/- .018" (12.0+/-.47 MM)

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 90 Durometer, Black O-Ring Cord, Easy Splice 0.125" +/- .006" (3.2+/-.18 MM)

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 55 Durometer, Black O-Ring Cord, Easy Splice 0.625" +/- 0.031" (15.9 +/- 0.82 MM)

Easy Splice 0.625″ +/- 0.031″ (15.9 +/- 0.82 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.