Midstream

Precision Polymer Engineering

Precision Polymer™ Z85L

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

Daikin Industries, Ltd.

Neoflon EFEP RP-5000AS

Neoflon EFEP RP5000AS is a conductive fluoropolymer that can adhere to the other materials. It has a good chemical resistance as ETFE at the same time.

Daikin Industries, Ltd.

Neoflon EFEP RP-4020

Neoflon EFEP RP4020 is a fluoropolymer that has chemical resistance and the capability to adhere to the other materials.

Daikin Industries, Ltd.

Neoflon EFEP RP-5000

Neoflon EFEP RP5000 is a fluoropolymer that has chemical resistance and the capability to adhere to the other materials. It has a good chemical resistance as ETFE at the same time.

Precision Polymer Engineering

Perlast® ICE G75LT

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

Precision Polymer Engineering

Perlast® G92E

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

CrudeChem Technology

CrudeChem Technology DRA 200

DRA 200 is a concentrated high molecular weight polymer emulsion which is designed to hydrate quickly and reduce pipeline friction by 50-60%.

Daikin Industries, Ltd.

DAI-EL GBR-6005

DAI EL GBR 6005 is a fluoroelastomer which provides excellent resistance to amines and bases with good processability, compression set and resistance to steam and acids.

Tasnee

Tasnee HDPE 100 Orange

Tasnee HD 100 Orange is a High Density Polyethylene, orange colored resin. The product is classified as PE 100. Tasnee HD 100 Orange provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

Daikin Industries, Ltd.

DAI-EL GBR-6002

DAI EL GBR 6002 is a fluoroelastomer which provides excellent resistance to amines and bases with good processability, compression set and resistance to steam and acids.

Lankem

Kemsurf PWS

Kemsurf PWS is Based on a linear high 2-phenyl based alkylate. Isopropylamine salts have better solubility in hydrocarbon solvents compared to sodium salts.

ALD Technical Solutions

ALD Technical Solutions StrongBond™ Saturant Resin System (with 400A Saturant Resin & 420B Saturant Hardener)

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

ALD Technical Solutions

ALD Technical Solutions CompositeWrap™ UDC20 Carbon Fabric

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

ALD Technical Solutions

ALD Technical Solutions CompositeWrap™ BDC20 Carbon Fabric

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

ALD Technical Solutions

ALD Technical Solutions StrongBond™ Adhesive Putty System (With 200A Adhesive Putty & 200B Hardener Putty)

StrongBond™ 200 Adhesive Putty System is a high-strength, toughened, structural epoxy adhesive for the bonding of carbon fabrics to itself and many dissimilar materials. It is a two-phase (toughened) epoxy resin produced using a CTBN elastomer with a flexible epoxy resin backbone for maximum stress and fatigue resistance. StrongBond™ 200 Adhesive Putty System with an immediate high tack consistency, a long working life, and a quick cure time. StrongBond™ 200 Adhesive Putty System may be used at ambient temperature(s) ranging from 55°F(13°C) to 100°F (38°C). The working life at 100°F (38°C) is > 2 hours (working time increases with lower ambient temperatures), with full cures occurring between 6-12 hours depending on cure temperature. Unlike most epoxy adhesives, StrongBond™ 200 Adhesive Putty System cured at ambient temperatures provides heat resistance well more than most engineering limits with an HDT of 85°C (185 °F). The material mixes at 2:1 by volume or 100:44 by weight (resin to hardener). The convenient color-coded components form a uniform color when properly mixed. StrongBond™ 200 Adhesive Putty System is designed for high production meter/mix ram dispensing and although highly thixotropic, has very fast application rates. With low odor and toxicity, StrongBond™ 200 Adhesive Putty System is solvent-free, and 100% solids.

ALD Technical Solutions

ALD Technical Solutions StrongBond™ Saturant Resin System (with 400A Saturant Resin & 410B Saturant Hardener)

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

ALD Technical Solutions

ALD Technical Solutions StrongBond™ Saturant Resin System (with 400A Saturant Resin & 400B Saturant Hardener)

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

ALD Technical Solutions

ALD Technical Solutions StrongBond™ Saturant Resin System (with 400A Saturant Resin & 430B Saturant Hardener)

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

Parco

Flurocarbon 9021-95

Flurocarbon 9021-95 is 95-durometer fluorocarbon having excellent resistance to compression set and better extrusion resistance.

Parco

Flurocarbon 9009-90

Flurocarbon 9009-90 is fluorocarbon seal ideal for a variety of oil field and aerospace applications.Parco 9009-90 seals are suitable for applications ranging from -20 to +400°F.

Parco

Viton® 9166-75

Viton® 9166-75 is 75-durometer fluorocarbon; excellent resistance to fuels, alcohols, and solvents; blue. (Polymer: ETP)

Tetraco

Tetra 1172

Tetra 1172 is a water soluble filming amine/anti water foulant. It is a water soluble corrosion inhibitor for pipeline applications.

Carboline

CARBOCRYLIC® 3358

CARBOCRYLIC® 3358 is a surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel.

Parco

Flurocarbon 9505-75

Flurocarbon 9505-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set, and low cost and is brown in color.

Carboline

CARBOCOAT® 153

CARBOCOAT® 153 is an universal alkyd metal primer formulated with rust inhibitors to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. It can be top coated with a variety of finishes such as polyurethanes, epoxies, alkyds, and acrylics.

R-E-D Industrial

R-E-D Fume Oil & Gas - 104 OG

R-E-D Fume Oil & Gas - 104 OG is used to make high performance concrete in the oil and gas fields. It provides better flow for easier application, decreases permeability by increasing the resistance to ion penetration and potential gas migration, provides greater enhancement in compressive and flexural strengths, durability, modulus of elasticity, and pore structure, reduces viscosity and the set time of cement based materials.

Resoltech

RESOLCOAT 7080 HC GRIS

RESOLCOAT 7080 HC GRIS / 7086 HC epoxy gelcoat is specially formulated for the production of structural composites parts exposed to fuel and other oil derivatives such as offshore oil drilling equipment, fuel tanks. This new generation system, optimized with excellent self leveling characteristics and excellent air release, is suitable for the manufacture of large composite parts.

Carboline

CARBOCOAT® 150 UNIVERSAL PRIMER

CARBOCOAT® 150 UNIVERSAL PRIMER is a heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.

Parco

Nitrile 2276-70

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

Polotsk Steklovolokno

Polotsk Steklovolokno BS16 1200Н-76(200)

BS16 1200Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Parco

Viton® 9066-75

Viton® 9066-75 is 75-durometer fluorocarbon having excellent resistance to compression set, and improved low-temperature flexibility (TR-10 value of -25°F) and meets the requirements of Aerospace Material Specification (AMS) R 83485.

Tetraco

Tetra 14

Tetra 14 is an Imidazoline/APQ/Tetra 241M (ADBAC) 70% active. It is a water/oil soluble corrosion inhibitor concentrate designed for pipeline applications.

Parco

Viton® 9164-90

Viton® 9164-90 is 90-durometer fluorocarbon; excellent resistance to fuels, alcohols, and solvents. (Polymer: ETP)

Precision Polymer Engineering

Precision Polymer™ N70M

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications

Bell Plastics

Bell Plastics Ultra XLPE Film

Bell Plastics Ultra XLPE Film is a new and innovative film that offers many of the advantages of UHMWPE films as well as the added benefit of being able to produce much wider sheets, all at a significant cost savings. Bell Plastics Ultra XLPE Film has excellent abrasion and chemical resistance and is ideal for applications such as hose covers and abrasion resistant industrial products.

Parco

Nitrile 0209-70

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.